Overview of salaries statistics in the category "Transport & Logistics in "

PURPOSE OF JOB Tech Services Specialist is responsible to effectively promote and sell Tech services and products, executing both in-store and in-home/business. They will install, configure, upgrade, troubleshoot and repair computer hardware and operating systems, partnering with the Warranty Depot/Matrix teams as required. They are responsible for establishing and maintaining sales and service excellence by assigning the highest priority to customer satisfaction and demonstrating quality in every aspect of work. Provides guidance, training and coaching to associates as required on company initiatives, sales programs and product knowledge. Dependent on store sales volume this role will effectively balance their time in Tech Services as well as direct sales floor activities. PRIMARY DUTIES AND RESPONSIBILITIES • Maximizes sales opportunities with every customer by using current selling techniques and company programs. • Leads and promotes selling of technology services/products and supports a selling culture in order to achieve current goals and targets. • Arranges service appointments, performs In Store/In Home/Business computer upgrades, repairs and setups and follows up with customers. • Ensures high quality execution of all technology services to minimize rework. • Provides training and coaching to associates on technology services and on the sales floor in Capital goods. • Effectively resolves customer concerns and escalates to management when appropriate. • Performs follow up calls to solicit feedback on sales, promote additional products and services. • Facilitates repairs to be done by the Warranty Depot or third party repair facilities to ensure satisfactory customer service standard. • Executes ETS procedures effectively. • Updates management on ongoing work that may require action or follow up in their absence. • Prioritizes time between Tech Services and the sales floor based on business needs and as directed. • Provides coverage and assistance in the technology department where business needs require and as associate training supports. • Understands and adheres to all privacy and information management policies and procedures. • Properly secures company and customer assets and physical inventory and follows all loss prevention procedures. • Has a complete understanding of all company policies and procedures related to this position, as outlined in the training checklist. • Checks all sources of communication for information (white boards, bulletin boards, HUB, etc). • Identifies and communicates suggestions for improvements in all areas of business. • Maintains general cleanliness of all tech room and workstations as assigned, according to company standards. • Maintains a safe working environment and follows all company protocols for safety and is required to report any unsafe working conditions to a manager. • As per policy, required to have personal parcels (bags, totes, backpacks, purses, etc.) checked by a manager prior to leaving the store premises. • Where store market has been approved and sales volume supports, associate may fulfill In Home Service for multiple locations. Associate is required to review and sign off on agreement of the 'In Home Services' Guidebook and ensure their full understanding of this program prior to supporting this. KNOWLEDGE / SKILL REQUIREMENTS • Verifiable and demonstrated skill in performing services/upgrades to all types of computers. • Demonstrates strong selling ability. • Ability to make appropriate product recommendations to customers. • Capacity to communicate with customers effectively using a variety of mediums. This involves the ability to take full ownership of the customer relationship and the ability to resolve customer concerns in a diplomatic manner. • Demonstrates leadership, and the ability to effectively train and coach. • Ability to make appropriate product recommendations to customers and at times do so 'in the moment'. • Ability to make decisions with integrity that supports company guidelines and makes good business sense. • Ability to plan, organize and prioritize efficiently and effectively to handle their daily responsibilities and serve our customers. Ability to deal with multiple priorities and tasks at one time. • Ability to work effectively with ongoing distractions is necessary. • Can engage appropriately and work as part of a team. • Capacity to work independently and seek out assistance as required. • Able to work flexible schedule. PHYSICAL DEMANDS / WORKING CONDITIONS • Conditions of the work environment are such that minor stress and physical discomfort may occur. • A moderate amount of physical effort is required while handling technology equipment. RECOMMENDED QUALIFICATIONS Experience: • 1-2 years of previous related experience is preferred. • Technical system diagnostic and upgrades/repair experience is preferred. • Valid drivers' license is preferred. Education: • Working towards or successful completion of high school is preferred. Staples is an equal opportunity employer committed to diversity and inclusion and we encourage applications from all qualified candidates, including those with disabilities. We will accommodate applicants' needs, upon request, throughout all stages of the recruitment process. Please inform us of the accommodation(s) that you may require. Information received relating to accommodation will be addressed confidentially.

*Our client a freezer distribution centre located in Rexdale in the Martin Grove/Rexdale area are looking to add certified operator's to their team on Afternoon & Night shifts*Job Description:Operating Forklift's Crown Reach, Counterbalance & Walkie in fast paced freezer distribution environment, loading/unloading, put aways, replenishment of various consumer products. Must be able to lift up to 50lbs. This position require's all operators also performance various other duties including but not limited to picking product, building skids, shrink wrapping, etc.*What We Offer*Afternoon Shift: 2:00pm - 10:00pm (Monday-Friday)Night Shift: 10:00pm - 6:00am (Sunday to Thursday)Pay Rate: $23.00/hr plus 4% vacation payLong term opportunities with potential for permanent.Freezer equipment provided.Great team environment.Bus accessible. *Requirements*Must be certified and experienced operating Crown Reach, Counterbalance & Walkie.Minimum 1 year experience.Must be willing to work in freezer environment.Must be able to lift up to 50lbs.Must have good communication skills written and verbal.Must be able to work in fast paced team environment.Must have CSA Steel Toed Safety Shoes or Boots.Must have clean criminal record.Previous exp. with RF Scanner an asset.Please forward your resume for consideration to our recruitment team.

Merchandiser Retail Team Lead Canada NE PT Job Locations CA-ON-Etobicoke Position Type Part Time Postal Code M8Y 1H6 Requisition ID 2024-432226 Category Retail Sales Merchandising Summary Merchandiser Retail Team Lead Canada NE PT Location(s): Queensway125 The QueenswayEtobicokeONM8Y 1H6Sobeys SAS Retail Services Canada is currently hiring for a Merchandising Team Lead- Part Time (PT) for grocery relines/resets execution. What We Offer: $18/h pay. Morning/Day Time (No Nights Or Weekends) Availability: Monday Through Thursday Mornings/Days. Flexible Schedule What You’ll Do: Resets/relines- reading and executing planograms with all items tagged. Tagging, rotating, and placing products on shelf. This includes adjusting shelf heights and movement. Building and maintaining relationships with SAS Retail Services Management (area manager), Store Management and assigned merchandiser (when provided). Timely electronic reporting of reset execution and work hours. Can you meet these requirements? Reliable transportation to one or multiple local locations. Physical Requirements: standing/being on feet for up to 8h and being able to lift up to 50+lbs. Comfortable working with smart phone type technology. Prior grocery or big box store retail merchandising experience preferred. Planogram experience preferred: Training available. Ability to work independently or with other merchandisers. SAS Retail Services Canada is a third-party retail merchandising company with cutting edge technology that does retail merchandising in any store, any aisle, any service. Our parent Company is Advantage Solutions Canada (ASM). Responsibilities Advantage Sales and Marketing LLC dba Advantage Solutions is one of North America’s leading sales and marketing agencies specializing in outsourced sales, merchandising, category management and marketing services to manufacturers, suppliers and producers of food products and consumer packaged goods. Advantage Solutions services a variety of trade channels including grocery, mass merchandise, specialty, convenience, drug, dollar, club, hardware, consumer electronics and home centers. We bridge the gap between manufacturers and retailers, providing consumers access to the best products available in the marketplace today. Position Summary Merchandiser Retail Team Lead is responsible for merchandising; resetting ASM manufacturer’s products at retail accounts to ensure customer and clients expectations are met. Essential Job Duties and Responsibilities • Reset Activity, Shelf Conditions and Schematics Completion: Be able to implement customer approved schematics/plan-o-grams/MODs with all items tagged and approved by store management. Must be able to take direction regarding tagging, rotating, and placing products on shelf.• Customer Relations: must have the ability to communicate effectively both internally to Advantage Solutions management and externally with Customers.• Administration/Reporting: will complete (web based) accurate and timely reporting, recaps, timesheets, expense reports, etc. Supervisory ResponsibilitiesDirect Reports- This position does not have supervisory responsibilities for direct reportsIndirect Reports- This position does not have guidance or mentoring responsibilities for indirect reports Travel and/or Driving Requirements- Travel and Driving are essential duties and function of this job - Travel up to 20 % Minimum Qualifications The following are the minimum job-related qualifications which an individual needs in order to successfully perform the essential duties and responsibilities of the jobEducation Level: (Required): High School Diploma or GED or equivalent experienceField of Study/Area of Experience: Retail, Consumer Package Goods (CPG), or merchandising products at retail accounts within an assigned territory 0-2 Years of experience in retail merchandising and/or selling Skills, Knowledge and Abilities • Previous retail experience• Strong self-management skills• Ability to complete daily procedures and responsibilities without direct supervision.• Must demonstrate good judgment and show respect for others.• Focused on the general reset of Consumer Package Goods (CPG) at various locations where CPG goods are sold, such as grocery and convenience stores. These positions may be part-time or full-time.• Responsible for merchandising products at retail accounts within an assigned territory. Environmental & Physical RequirementsField / Reps RequirementsIncumbent must be able to perform the essential functions of the job. Work is performed in a retail in-store environment. Typically requires the ability to spend 66%+ hours each work day doing the following activities: engage in considerable physical activity, ability to lift and/or push up to 35 kgs, stand on feet for long periods of time, use products or cook food as appropriate for the demonstration, and may be required to work in extremely cold conditions (i.e. refrigerated and freezer sections). Also required to travel and drive. The use of proper safety practices when handling the products and/or cooking is essential. Field / Administrative RequirementsIncumbent must be able to perform the essential functions of the job. Work may be performed in an office, field, retail store, or warehouse environment. Typically requires the ability to spend 66%+ hours each work day doing the following activities: engage in considerable physical activity, ability to lift and/or push up to 25 kgs, stand on feet for long periods of time, use products or cook food as appropriate for the demonstration, and may be required to work in extremely cold conditions (i.e. refrigerated and freezer sections). Also required to travel and drive. The use of proper safety practices when handling the products and/or cooking is essential. Additional Information Regarding Advantage Solutions Job Duties and Job Descriptions The Company is committed to providing equal opportunity in all employment practices without regard to race, nation or ethnic origin, colour, religion, age, sex (including pregnancy and childbearing), sexual orientation, marital status, family status, physical or mental disability or pardoned criminal convictions, or any other category protected by law. The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. The Company reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job position or assign additional job responsibilities. The Company shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. Employee understands that neither the provision of the Job Description nor any representation in this document creates a guarantee or contract of employment for any specified period of time or changes the nature of Employee’s employment, which can only be modified in a writing signed by the CEO. Important Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of associates so classified. The Company is committed to providing equal opportunity in all employment practices without regard to age, race, color, national origin, sex, sexual orientation, religion, physical or mental disability, or any other category protected by law. As part of this commitment, the Company shall provide reasonable accommodations of known disabilities to enable an applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. The Company welcomes and encourages applications from people with disabilities. The Company will provide reasonable accommodations, accessible formats and communication supports upon request to persons with disabilities who take part in all aspects of the recruitment and selection process. If you require accommodation in connection with the application process, please contact: Recruiter, Talent Acquisition, for external applicants, or, a Supervisor for internal applicants. Apply/Share Apply Now!ApplyShareEmail a Friend/ColleagueRefer Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed CONNECT TO YOUR CAREER Not ready to apply? Connect with us for general consideration. Interested in this opportunity? Socialize this job opportunity to a friend, colleague, or family member: Job Applicant Privacy PolicySoftware Powered by iCIMSwww.icims.com

Maintenance Mechanic PERMANENT DAY Shift - $35/hr to $44/hr to start dep. on exper.LOCATION: Etobicoke, OntarioQualifications:* Mechanical and Electrical maintenance training and aptitude (trade license not required)* 5 yrs+ experience in maintenance of industrial machinery in a manufacturing environment* Experience with metal fabrication / parts production preferred* Good familiarity with drives, gearboxes, and motors* Experience with machining or welding an asset* Knowledge of electrical maintenance 480V and under (wiring, circuits, power suppliers, PLC troubleshooting, etc.)* Ability to work with minimal supervision* Good interpersonal skills and a team player with a safety-first attitude* Strong troubleshooting and problem solving skills* Willing and able to work assigned shift as requiredDuties:* Repair, maintaining and/or overhauling automated and PLC controlled fabrication equipment as needed* Troubleshooting fabrication equipment mechanical and any electrical (wiring, circuits, power supplies, etc.), 480V and under* Participating in PM program* Complete all maintenance work in accordance with Occupational Health & Safety Act of Ontario and industrial regulations* Perform other duties as assignedPosition reports to: Engineering Team Lead

Division Description Deco Automotive, a Division of Magna International is located in Rexdale and Brampton, Ontario is an automotive parts manufacturing facility that produces structural automotive components for Original Equipment Manufacturers (“OEM”) including BMW, Chrysler, Ford, General Motors, and Toyota/Lexus. Deco Automotives’ capabilities include; Stamping, Hydroforming, CNC Machining, E Coating, Steel and Aluminum Weld Assembly. We are certified in ISO/TS 16949 and ISO 14001. What Deco Offers • A great work experience with a diverse and dedicated workforce • A strong focus on safety and health and wellness (fitness membership discounts, subsidized cafeteria, and year-round access to a private park) • Four (4) paid personal days • Competitive extended health benefits • Group RRSP matching program • Profit Sharing Plan • Team appreciation lunches and events • Education Reimbursement Program • Continuous Improvement and Development Culture Your New Role Oversee the assigned maintenance area and ensure that the department operates safely and efficiently. What You Will Need to Succeed Certification of qualification from one of the following trades: Industrial Electrician, Industrial Millwright, Industrial Tool & Die Maker, Controls Technician. Completion of a technical diploma program (2 years+) from an accredited college or university. Minimum 1 year of experience in a leadership role (prefer automotive manufacturing). Minimum 5 years of experience in an industrial environment. Strong technical background in one of the following processes: Metal Forming (Stamping/Hydroforming) or Robotic Welding Assembly Lines. Knowledge, experience and formal training with the Occupational Health and Safety Act and Regulation 851 (Industrial Establishments). Excellent interpersonal and communication skills. Physically capable of performing essential duties of the job. As a Maintenance Supervisor, You Will • Facilitate the day to day operations of the maintenance department under the direction of the Maintenance Manager; • Attend daily production meetings and participate in problem solving; • Responsible for standard documentation, i.e. equipment PM’s, purchase requisitions, estimate part costs, quotations, employee performance management. • Demonstrate a high level of initiative and lead by example; • Able to coordinate a large volume of work by utilizing the assigned maintenance staff; • Provide safety instructions to the team and enforces safety rules and regulations • Committed to continuous improvement on machinery, equipment and processes; • Communicate and coordinate program changes on existing equipment with production, engineering, and management. • Administer first aid when necessary and fill out reports; • Perform regular workplace inspections in assigned maintenance area and report any hazardous conditions and/or take immediate corrective actions; • Conduct safety talks, staff meetings, and department meetings; • Be involved in accident/incident investigations and generate reports as necessary; • Ensure that new employees are trained on plant/department hazards and safe operations of equipment; • Performance management of team • Commitment to continuous improvement and work place safety. • TS16949, ISO14001, Lean Manufacturing and 5S concepts awareness and adherence, • Other duties as may be required. • Accepts personal responsibility to plan and conduct their work safety in compliance with the Occupational Health & Safety Act as well as company policies and guidelines. Additional Information Accommodations for disabilities in relation to the job selection process are available upon request. 07--Operations F--Permanent/Regular