Overview of salaries statistics of the profession "Energy Systems Control Technician in Canada"

Building Energy Simulation Specialist:  Harvey 2408 Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting, and is willing to take on responsibility as his/her experience progresses.Objective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.                                        The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:   Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST / CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key players Expected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits packagePerformance bonus is available                                                                                                                                                

Building Energy Simulation Specialist:  Harvey 2409Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting and is willing to take on responsibility as his/her experience progresses.Position: Building Energy Simulation SpecialistObjective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:  The Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST/CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key playersExpected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits package availablePerformance bonus

Title: Building Control Technician Location , Ottawa, ONType: Full Time, PermanentSalary: TBDBenefits: Full BenefitsReporting to: Service Manager About Our client is a One-Stop-Shop for clean air and healthy building innovations. They provides real estate owners/managers turnkey HVAC/Building Controls design, equipment, installation and ongoing operations and maintenance services for industrial, commercial, institutional and multi-residential customers from east coast to Ontario. -Our client has a proud 40-year history with Federal Government and marquee facilities. - With headquarters in Toronto and has offices across Canada including, Halifax, Montreal, and Ottawa. Position SummaryThis position is primarily responsible for maintaining, servicing and commissioning computerized automated building controls (HVAC). Under specific task direction, the technicians work on the maintenance or installation of VCI Controls systems at various sites.  To work on various sites, you must be able to obtain government security clearance, by way of having your Canadian citizenship, which is a requirement for this position. RequirementsSecurity clearance is needed.Must be Canadian Citizen 2-3 years’ experience in executing projects in the construction or building controls industrySound knowledge of building control systems and the construction environmentElectrical / Electronic / Mechanical / Control Technologies diploma or, minimum 2 - 3 years’ experience in controls and/or HVACBilingual (English and French) is an asset.PC/Computer LiterateAble to work with minimum supervisionSuperior time management and organization skillsValid Driver’s License and have own transportationPersonal SuitabilityJudgment & decision-making Planning & organizing Problem analysis & problem solving Strong communication and interpersonal skills Excels in collaborative work environmentSeeks long term development growth within companyWork Environment  Work from home and office, and have access to a vehicle for service calls and meetings, as required. 

Building Energy Specialist:  Harvey 2475 Job Description:Our Company is currently seeking a self-motivated, hardworking Building Energy Specialist to join our Vancouver, Calgary or Edmonton Office.This is an excellent opportunity for someone who is interested in energy efficiency and sustainable building design.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting, and is willing to take on responsibility as his/her experience progresses.The incumbent will be a key member of our company Energy Modelling Services and Sustainability Team in Western Canada, reporting to the Sustainability Team Leader.The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings, and to train less experienced staff on these tools and techniques. Responsibilities: The Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in commercial, residential and institutional buildings.Calculate energy consumption and demand savings associated with energy conservation measures for new and existing buildings, along with associated greenhouse gas savings.Provide design feedback to architects and other project stakeholders.Provide feedback to engineers on HVAC and lighting design and operation.Demonstrate compliance with energy codes and standards.Complete energy code compliance reports for building permit applications.Complete energy performance reports and documentation required to support green building certifications such as LEED® and the Zero Carbon Building Standard.Complete energy efficiency incentive applications on behalf of our clients.Conduct facility site visits and energy audits as required.Develop written documentation concerning building energy performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measure.Evaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data.Train, coach and mentor other members of the team.Overtime as required.Qualifications, Experience, and Education:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering, Alternative Energy or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an asset.Minimum 5 years of relevant work experience doing building energy assessments or simulations with a variety of modelling software programs including IES Virtual Environment.Experience working in a consulting environment or the Energy Management field is an asset.Experience working directly with clients.Experience working in a team based environment with a deadline oriented culture.The ability to effectively communicate technical analysis both verbally and in writing.A self-starter with the ability to produce and implement creative and innovative solutions.The ability to build long lasting relationships with clients and other key players.Good knowledge of reading drawings.Required Skills:Strong understanding of building envelope, mechanical, HVAC and electrical building systems, energy markets, alternative energy technology, energy project implementation, and the building construction process.Proficiency with Microsoft office suite with advanced knowledge of Excel.Working knowledge of IES-VE, EQUEST, Trace and/or HAP and the ability to troubleshoot software issues.Working knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step Code.General knowledge of programming is an asset.Good foundation of HVAC design and experience in controls and commissioning would be an asset.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Excellent time management and project management skills.High level of sound and independent judgment and reasoning.Job Specific Competencies:Analytical Thinking – Analyzing and synthesizing complex situations and information to understand issues identify options and support sound decision-making.Attention to Detail – Working in a conscientious, consistent and thorough manner.Client Focus – Provides added value through service excellence to internal and/or external clients.Continuous Improvement and Learning - Identifying and addressing learning and development needs to enhance own performance.Initiative - Dealing with situations and issues proactively and persistently, seizing opportunities that arise.Interactive Communication - Listening to others and communicating articulately, fostering open communication.Product Knowledge - Understanding the products and services provided.Testing - Knowledge and ability to perform testing of software and/or hardware using a systematic approach.Problem Solving – Identifying problems and the solutions to them.Resilience – Remains energized and focused in the face of ambiguity, change or strenuous demands.Results Management – Organizes time, work and resources to accomplish objectives in the most effect and efficient way.Teamwork – Working collaboratively with others to achieve organizational goals. This is a full time positionSalary is open depending on experienceBenefits package available after 3 months

NB 51155285 - NC 51155308 PTL-R-5285-220303E1Employment Posting ID: Electrical Technician Powertech Positions Available: 1 Full-time (37.5 hrs/wk)Status: Job Location: Permanent ResidentFlexible Work Role: Lower MainlandRegion: Powertech Labs Inc, BC Hydro's subsidiary that specializes in energy research, consulting, testing, and systems integration, has been serving power utilities, oil and gas companies, automotive, and electrical utility equipment manufacturers since 1989. We operate as a separate, unregulated, for profit, commercial company. In addition to providing innovative R&D, consulting, and testing services to BC Hydro, Powertech provides most of its services to a large and diverse suite of clients across North America, and around the world. Powertech is located on an 11-acre campus in Surrey, British Columbia and has 200+ employees. Our reach and reputation are global, and we are recognized as a leader in technology, testing, and power systems software. Our location places us close to BC Hydro, 25 kilometers from the US border, and at a gateway between Asian and North American markets. Finally, we are located in one of the most desirable locations on the globe, with all the natural beauty of British Columbia on our doorstep. We call this home. Powertech's brand and reputation command a dominant position in the power industry. To better serve our clients, we group our services under six market-oriented sectors: Generation, Transmission and Distribution, Substations, Power Systems, Grid Modernization and Advanced Transportation. Powertech's competitive advantage is enhanced through close collaboration between all sectors. The company's staff consists of professional engineers, scientists, technologists, and technicians from a wide range of disciplines, as well as a wide range of professionals within the central Corporate functions. These highly skilled individuals have access to 21 well-equipped, specialized laboratories. Together, our resources allow us to offer a range of forward-looking technology services to help clients advance technology, solve complex problems, and maximize asset performance. We are a customer-focused organization here to ensure our customers have high confidence in our services. To this end, we attract and hire the best resources, are highly responsive and constantly strive to improve the quality and value of our services. JOB DESCRIPTION Duties: * Sets up and carries out electrical tests under the supervision of an engineer or technologist. * Performs laboratory measurements following established procedures and records the results. * Operates computers and test instruments as required for testing. Performs routine repairs, maintenance and calibration of electrical test equipment, tools and instruments. * Builds or modifies test jigs and support structures to be used for electrical tests. * Specifies and purchases materials and equipment needed for routine operation of electrical test labs. * Maintains test facilities in a safe and organized condition. * Maintains log books and files to document tests performed, operating procedures, equipment PTL-R-5285-220303E1 - Electrical Technician Powertech NB 51155285 - NC 51155308 calibration, etc. * Performs duties of a minor nature related to the above duties which do not affect the rating of the job. This includes the performance of duties across disciplines in a job of the same or lower job group. Qualifications: * Certificate of Technology from an Institute of Technology in Electronics (Power/control option), Electrical, Power, Telecommunications, Instrumentation or Automation disciplines with preference given to the discipline directly relating to the position or lab. * Two (2) years of related experience working in a lab setting up and performing tests on a variety of electrical equipment, components and cables. ADDITIONAL INFORMATION * Certificate/ Diploma in Electrical Technology discipline is required for this role * General technical knowledge in generation, transmission, maintenance, apparatus, civil structures and/or control functions would be an asset * Introductory knowledge of project management * Knowledge of substation and/or distribution equipment would be an asset * Testing of substation and/or distribution equipment would be an asset * Drafting skills would be an asset * Experience High Currents, High Power and/or High Voltage is desirable * Experience with data acquisition and analysis equipment is desirable * Must be able to work in confined space * Must be able to lift 50 lbs. * The successful incumbent will be required to work a day shift that spans the weekend e.g. Friday - Tuesday or Thursday - Monday. The exact days are still to be determined. * Must be able to work at heights > 10 feet * Occasional travel across various locations in BC may be required * Must have a valid class 5 driver's license * Must be able to perform all physical requirements of the role Location : Surrey, B.C. Job Code: CHA1ZZ Job Group : 8 Please be advised that this role has been assessed as safety sensitive and pre-qualification alcohol and drug testing will be required as a pre-condition to employment. All successful candidates will be required to provide proof of full vaccination against COVID-19 prior to commencement of employment. For Powertech Lab positions, the flexible work model options are different due to their specific operational requirements and details will be discussed at the interview stage. We're always looking for exceptional people to bring new ideas, fresh thinking and the motivation to help shape the electricity system in B.C. It's an exciting time to be a part of our team as we PTL-R-5285-220303E1 - Electrical Technician Powertech NB 51155285 - NC 51155308 invest in our system and prepare to meet the challenges of tomorrow. Our values guide our work. Want to join us? We are safe. We are here for our customers. We are one team. We include everyone. We act with integrity and respect. We are forward thinking. BC Hydro is an equal opportunity employer. We include everyone. We welcome applications from anyone, including members of visible minorities, women, Indigenous peoples, persons with disabilities, persons of minority sexual orientations and gender identities, and others with the skills and knowledge to productively engage with diverse communities. We are also happy to provide reasonable accommodations throughout the selection process and while working at BC Hydro. If you require support applying online because you are a person with a disability, please contact us at [email protected] . All BC Hydro employees will be required to show proof of full Covid-19 vaccination. Flexible work model role definitions =========================== Our four role types identify the degree of flexibility an employee could have to work from home based on the type of work they do. The flexibility for an individual job is up to the manager for each position and the operational requirements. Employees also have the right to work full-time from the office if they prefer. All of our roles require at least some in-person time. IBEW/Field - No option to work from home Resident - Works primarily (4+ days per week) in the office. Hybrid - May be able to work from home up to 3 days per week. Remote - Works from home 4+ days per week HOW TO APPLY ALL CANDIDATES ARE REQUIRED TO ATTACH A COPY OF THEIR COVER LETTER, RESUME, DIPLOMA/DEGREE, ACADEMIC TRANSCRIPTS & PROOF OF PROFESSIONAL DESIGNATION. If applicable, a copy of your work visa is also required. INCOMPLETE OR LATE APPLICATIONS CANNOT BE PROCESSED. This will ensure we have all the necessary information to assess your application without any delays. Click on the Apply button in order to complete the steps to apply for this job. Date Posted: 2022-03-03 Closing Date: 2022-03-18

Control Systems Specialist (20-monthterm position)Williams Lake, British ColumbiaIND#123We are looking for a highly motivated individual to contribute to our Lakeview Division, a key producer of Dimensional Lumber.This position is responsible for developing and implementing controls solutions to improve plant safety, product quality, and production throughput. Control Systems Specialists are responsible for controls standards, PLC/HMI programming, equipment commissioning, troubleshooting of control system issues, as well as project support.Reporting to the Regional Control Systems Specialist, the candidate will work closely with other Control Systems Specialists and individuals in other departments.What We’re Looking For:3 + years of experience in a manufacturing environment (Forest Products Manufacturing preferred)Post-Secondary Engineering Degree or Engineering Technician Diploma in Electrical, Mechanical, or Mechatronics EngineeringProfessional designation (P.Eng or A.Sc.T) is an assetExperience with PLC programming (Rockwell Studio 5000 preferred)Experience with Human Machine Interfaces (FactoryTalk View SE, Wonderware Galaxy preferred)Proficient with FactoryTalk software (Historian, View, Linx, AssetCentre, etc.)Motion Control and Variable Frequency Drive (VFDs) experienceAbility to design and support Ethernet networksAbility to troubleshoot ControlNet/DeviceNet networksWhat We Offer:An unyielding commitment to your personal safetyCompetitive pay and exceptional benefitsThe opportunity to work with the best and brightest in the industryA positive, dynamic, and inclusive work environmentAn open, innovative culture with diverse opportunitiesA commitment to investing in our people through training and developmentThe chance to live (and play) where you workWant to know what it’s like to work for Tolko? Click hereWho We Are:With state-of-the-art operations across western Canada, Tolko is a leading manufacturer of a wide range of forest products for customers around the world. For over 60 years, our family-owned company has been recognized by customers and business partners for being reliable, flexible, efficient and offering quality products. With the third generation of family leadership, we’re continuing that legacy today in our divisions throughout western Canada and joint ventures in the Southern United States.At Tolko, our values, vision and mission aren’t just what we believe. They’re how we work, live and serve our customers every day. Fundamental to our success is a diverse and committed workforce that thrives on change, building relationships, and a drive toward excellence.Grow Here, Achieve More:When you join Tolko, you’ll develop your skills and be encouraged to pursue diverse opportunities with a company that’s built on integrity, respect, and provides employees with the inclusive environment, support and opportunity to build great lives.If this position sounds like a fit for you, we’d love to hear from you! Applications will be accepted at www.tolko.com until a suitable pool of candidates is available. We thank all candidates for their interest; however only those selected for an interview will be contacted.Follow us on LinkedIn, Facebook, and Twitter to stay up to date on Tolko news and job postings.

Control Systems SpecialistSlave Lake, AlbertaIND#123We are looking for a highly motivated individual to contribute to our Athabasca Division, a key producer of Oriented Strand Board and Engineered Wood Products.This position is responsible for developing and implementing controls solutions to improve plant safety, product quality, and production throughput. Control Systems Specialists are responsible for controls standards, PLC/HMI programming, equipment commissioning, troubleshooting of control system issues, as well as project support.Reporting to the Regional Control Systems Specialist, the candidate will work closely with other Control Systems Specialists and individuals in other departments.What We’re Looking For:3 + years of experience in a manufacturing environment (Forest Products Manufacturing preferred)Post-Secondary Engineering Degree or Engineering Technician Diploma in Electrical, Mechanical, or Mechatronics EngineeringProfessional designation (P.Eng or A.Sc.T) is an assetExperience with PLC programming (Rockwell Studio 5000 preferred)Experience with Human Machine Interfaces (FactoryTalk View SE, Wonderware Galaxy preferred)Proficient with FactoryTalk software (Historian, View, Linx, AssetCentre, etc.)Motion Control and Variable Frequency Drive (VFDs) experienceAbility to design and support Ethernet networksAbility to troubleshoot ControlNet/DeviceNet networksWhat We Offer:An unyielding commitment to your personal safetyCompetitive pay and exceptional benefitsThe opportunity to work with the best and brightest in the industryA positive, dynamic, and inclusive work environmentAn open, innovative culture with diverse opportunitiesA commitment to investing in our people through training and developmentThe chance to live (and play) where you workWant to know what it’s like to work for Tolko? Click hereWho We Are:With state-of-the-art operations across western Canada, Tolko is a leading manufacturer of a wide range of forest products for customers around the world. For over 60 years, our family-owned company has been recognized by customers and business partners for being reliable, flexible, efficient and offering quality products. With the third generation of family leadership, we’re continuing that legacy today in our divisions throughout western Canada and joint ventures in the Southern United States.At Tolko, our values, vision and mission aren’t just what we believe. They’re how we work, live and serve our customers every day. Fundamental to our success is a diverse and committed workforce that thrives on change, building relationships, and a drive toward excellence.Grow Here, Achieve More:When you join Tolko, you’ll develop your skills and be encouraged to pursue diverse opportunities with a company that’s built on integrity, respect, and provides employees with the inclusive environment, support and opportunity to build great lives.If this position sounds like a fit for you, we’d love to hear from you! Applications will be accepted at www.tolko.com until a suitable pool of candidates is available. We thank all candidates for their interest; however only those selected for an interview will be contacted.Follow us on LinkedIn, Facebook, and Twitter to stay up to date on Tolko news and job postings.

Building the life you want starts with acquiring skills that are in demand.As a Red Seal tradesperson, career potential is unlimited. It all starts with apprenticeship; a unique opportunity to earn and learn while building your career.British Columbia Construction Association (BCCA) Apprenticeship Services is launching a major industry-wide drive supporting small and medium construction employers to hire and register first-year apprentices.This province-wide recruitment drive is administered by BCCA as part of the BCCA Apprentices Services campaign. BCCA is launching a 22-month campaign funded by the Government of Canada’s Apprenticeship Service to enable small and medium-sized employers in BC’s construction industry to hire and register first-year apprentices. As part of the service to employers, BCCA will build a pool of qualified jobseekers, provide culture training via its Builders Code program, and mentorship support through its new Building Builders initiative. Additional apprenticeship supports, advice, and resources will also be made available to successful job applicants.To learn more about BCCA Apprenticeship Services, click here.About the OpportunityBritish Columbia has an increasing demand for skilled tradespeople, resulting in rewarding employment opportunities. As a first-year apprentice, you will be starting a career path towards obtaining your Skilled TradesBC trade certification and Red Seal endorsement. This is a great opportunity to get hands-on training while receiving a competitive wage for your work!A typical day as an instrumentation and control technician could include working in industrial construction or instrument servicing, hydropower generation, mining, petrochemical, or natural gas sectors. There are also opportunities to work in pulp and paper processing or manufacturing environments. Instrumentation and control technicians are involved in installing and maintaining a range of plant systems, including those for communication, process control, and energy supply (hydraulic, pneumatic, and electrical).Day-to-day as an apprentice you could be:Installing, maintaining, repairing, or measuring control devices used in industrial and commercial processingWorking with a wide range of pneumatic, electrical, and microcomputer instruments used to monitor and regulate flow, motion, force, temperature, and chemical compositionAssisting in the removal and replacement of defective parts, calibrating, conducting risk assessments, and maintaining components and instruments according to certain specificationsAbout YouBCCA Apprenticeship Services is looking for applicants interested in pursuing a career in construction as a first-year apprentice instrumentation and control technician. The ideal candidate should be interested in starting a career path towards certification as a Red Seal instrumentation and control technician and should be motivated to learn, reliable, and hardworking.To succeed as a first-year apprentice instrumentation and control technician, you: Communicate, work well with others, and follow directions well Have good dexterity and like to work with your handsEnjoy working indoors or outdoors in all seasons Like to solve problems and build solutionsAre physically fit with stamina for manual labourHave experience using hand and power toolsAre willing to follow safety guidelines at all timesUnderstand basic mathHave strong attention to detailAre in good physical condition with good enduranceOther qualifications can include (but are not required):Hands-on experience in working with installing and troubleshooting instrumentation or mechanical devicesOccupational First Aid training or SiteReadyBC certificationHigh school diploma and/or completion of the Instrumentation and Control Technician Foundation Program or Level 1 Instrumentation and Control Technician from a SkilledTradesBC recognized post-secondary institution in BCValid BC driver’s license and reliable vehiclePrior experience in construction (hobbies, summer jobs, or volunteer activities), agriculture or forestry, manufacturing, marine services or fisheries, municipal work, or other non-construction trades are a bonusThe Benefits of ApprenticeshipAn apprenticeship offers a pathway to a successful career in construction. You will earn an income while gaining work-based training hours, education, and certification. Apprentices are eligible for government grants, tax credits, and employment insurance while attending training. This can help you offset the cost of training and certification and allow you to complete your apprenticeship and minimize student debt.For more information on the benefits of apprenticeship, see SkilledTradesBC’s Apprentice Guidebook.The starting hourly rate for first-year apprentices is usually between $17-$22/hour. It is determined by each employer and can vary depending on skills, location, and your experience. As a first-year apprentice new to a trade it is customary to begin at the bottom of the pay range but as you ‘earn and learn’ on the job, your pay will increase as you progress in your apprenticeship.If this sounds like you, and you want to start your career in construction, we encourage you to apply today!

Building the life you want starts with acquiring skills that are in demand.As a Red Seal tradesperson, career potential is unlimited. It all starts with apprenticeship; a unique opportunity to earn and learn while building your career.British Columbia Construction Association (BCCA) Apprenticeship Services is launching a major industry-wide drive supporting small and medium construction employers to hire and register first-year apprentices.This province-wide recruitment drive is administered by BCCA as part of the BCCA Apprentices Services campaign. BCCA is launching a 22-month campaign funded by the Government of Canada’s Apprenticeship Service to enable small and medium-sized employers in BC’s construction industry to hire and register first-year apprentices. As part of the service to employers, BCCA will build a pool of qualified jobseekers, provide culture training via its Builders Code program, and mentorship support through its new Building Builders initiative. Additional apprenticeship supports, advice, and resources will also be made available to successful job applicants.To learn more about BCCA Apprenticeship Services, click here.About the OpportunityBritish Columbia has an increasing demand for skilled tradespeople, resulting in rewarding employment opportunities. As a first-year apprentice, you will be starting a career path towards obtaining your Skilled TradesBC trade certification and Red Seal endorsement. This is a great opportunity to get hands-on training while receiving a competitive wage for your work!A typical day as an instrumentation and control technician could include working in industrial construction or instrument servicing, hydropower generation, mining, petrochemical, or natural gas sectors. There are also opportunities to work in pulp and paper processing or manufacturing environments. Instrumentation and control technicians are involved in installing and maintaining a range of plant systems, including those for communication, process control, and energy supply (hydraulic, pneumatic, and electrical).Day-to-day as an apprentice you could be:Installing, maintaining, repairing, or measuring control devices used in industrial and commercial processingWorking with a wide range of pneumatic, electrical, and microcomputer instruments used to monitor and regulate flow, motion, force, temperature, and chemical compositionAssisting in the removal and replacement of defective parts, calibrating, conducting risk assessments, and maintaining components and instruments according to certain specificationsAbout YouBCCA Apprenticeship Services is looking for applicants interested in pursuing a career in construction as a first-year apprentice instrumentation and control technician. The ideal candidate should be interested in starting a career path towards certification as a Red Seal instrumentation and control technician and should be motivated to learn, reliable, and hardworking.To succeed as a first-year apprentice instrumentation and control technician, you: Communicate, work well with others, and follow directions well Have good dexterity and like to work with your handsEnjoy working indoors or outdoors in all seasons Like to solve problems and build solutionsAre physically fit with stamina for manual labourHave experience using hand and power toolsAre willing to follow safety guidelines at all timesUnderstand basic mathHave strong attention to detailAre in good physical condition with good enduranceOther qualifications can include (but are not required):Hands-on experience in working with installing and troubleshooting instrumentation or mechanical devicesOccupational First Aid training or SiteReadyBC certificationHigh school diploma and/or completion of the Instrumentation and Control Technician Foundation Program or Level 1 Instrumentation and Control Technician from a SkilledTradesBC recognized post-secondary institution in BCValid BC driver’s license and reliable vehiclePrior experience in construction (hobbies, summer jobs, or volunteer activities), agriculture or forestry, manufacturing, marine services or fisheries, municipal work, or other non-construction trades are a bonusThe Benefits of ApprenticeshipAn apprenticeship offers a pathway to a successful career in construction. You will earn an income while gaining work-based training hours, education, and certification. Apprentices are eligible for government grants, tax credits, and employment insurance while attending training. This can help you offset the cost of training and certification and allow you to complete your apprenticeship and minimize student debt.For more information on the benefits of apprenticeship, see SkilledTradesBC’s Apprentice Guidebook.The starting hourly rate for first-year apprentices is usually between $17-$22/hour. It is determined by each employer and can vary depending on skills, location, and your experience. As a first-year apprentice new to a trade it is customary to begin at the bottom of the pay range but as you ‘earn and learn’ on the job, your pay will increase as you progress in your apprenticeship.If this sounds like you, and you want to start your career in construction, we encourage you to apply today!

West Fraser is a leading forest products company in North America. Recognized for the ninth time as one of Canada's Top 100 Employers, we continue to grow. Our goals are straightforward - leadership through Safety, profit, responsibility in communities, excellence in people and strength in products.West Fraser is a leading diversified forest products company, listed on the TSX and NYSE. Recognized for theeighth time as one of Canada's Top 100 Employers, we are a growing company looking for talented people to be part of our team. Are you interested in working for a company that offers both a challenging work environment and a rewarding career path?Our Quesnel River Pulp division has an opportunity for a:CONTROL SYSTEMS TECHNICIAN The Control Systems Technician, will report to the QRP Management Team. The Control Systems Technician will be a key player in working with the mill team to maximize the control system platform to its potential. The responsibilities include Coordinating, developing and maintaining the Delta V DCS (Distributed Control System). Tasks may also include, documentation control, peer to peer training with the E&I resources, and troubleshooting both hardware and software faults through the daily use of predictive and preventative maintenance strategies. As a member of this high performing team, you will be responsible for working safely and efficiently within the pulp mill.The successful candidate will have proven experience in many of the following:Delta V DCSAMSModicon Quantum PLCEthernet NetworksInstrumentation ConstructionInstrumentation MaintenanceOur ideal candidate would have:A valid Instrumentation certification, Interprovincial Red Seal certification in Electrical or Instrumentation, or a diploma/degree in Chemical, Process or Electrical Engineering.5 years of experience in either a pulp mill or heavy industrial setting is preferred.Strong leadership, planning, budgeting and problem-solving skills.Knowledge of computer software and applications, with a preference given to a candidate with Maximo, MS Excel, AutoCAD and Word.Good organizational and project management skills.Excellent interpersonal, communication, and team-building skills.The ability to interact effectively with all levels of personnel, both hourly and management.The desire to progress, learn, grow and succeedEmbody the West Fraser values of integrity, humility, teamwork, frugality, innovation, competitiveness, and respectQuesnel River Pulp, using a high yield mechanical pulping process, produces 1100 tonnes per day of thermo-mechanical and bleached thermo-mechanical pulp. We take pride in our safety record, our effluent treatment system, the quality of our final product, and the cleanliness of our mill. We constantly strive to be an industry leader.Quesnel River Pulp offers a comprehensive relocation package to assist your move to Quesnel. Located in central BC, Quesnel has a population of approximately 25,000 and features all major conveniences, including its airport. Quesnel offers affordable housing, modern recreational and educational facilities, regular community events, as well as unlimited recreational activities for the outdoor enthusiast. It doesn’t take long to feel part of Quesnel’s welcoming community.Interested applicants should apply by sending their resumes and proof of qualifications in confidence.A family business at heart since 1955, West Fraser values excellence in performance and people, challenge and satisfaction, and profitability and growth. We practice leadership in our field and responsibility in our communities. For more information on West Fraser and our current opportunities, visit our website at: www.westfraser.com/jobsWest Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment based on race, gender, national origin or any other protected legal characteristic.We thank all candidates for their interest; however, only those selected for an interview will be contacted.#Automation #DCS

Electronic Instrument Control Technician 1 - HVAC Job ID 2023-92019 City Vancouver Work Location VGH 12th & Oak Home Worksite 01 - Vancouver General Hospital Labour Agreement Facilities Subsector Union 100 - Facilities HEU Position Type Baseline Job Status Regular Full-Time FTE 1.00 Standard Hours / Week 37.50 Job Category Trades & Maintenance Salary Grade 43 Min Hourly CAD $39.25/Hr. Max Hourly CAD $39.25/Hr. Shift Times 0600-1400 / 0730-1530 rotating Days Off Saturday, Stats, Sunday Position Start Date As soon as possible Salary The salary range for this position is CAD $39.25/Hr. - CAD $39.25/Hr. Job Summary Come work as an Electronic Instrument Control Technician with Vancouver Coastal Health (VCH)!Vancouver Coastal Health is looking for an Electronic Instrument Control Technician with HVAC experience to join the Plant Maintenance team at Vancouver General Hospital. Apply today to join our team! As an Electronic Instrument Control Technician with VCH you will:Perform skilled work in the installation, alteration, troubleshooting, maintenance, service and repair of electronic equipment and systems.Interpret prepared sketches, diagrams, schematic drawings, manuals, and manufacturer’s specifications.Understand and operate computer software for electronic equipment/systems, and building automation systems (BAS).All work performed on electronic equipment and systems is done in accordance with, where applicable, bylaws, regulations, codes and standards. Qualifications Education & ExperienceGraduate of a recognized diploma program in Electronic Technology.Three (3) years’ recent, related experience or an equivalent combination of education, training and experience.Knowledge & AbilitiesAbility to communicate effectively both verbally and in writing.Ability to deal with others effectively.Physical ability to carry out the duties of the position.Ability to read and interpret blueprints, drawings and specifications.Ability to organize work.Ability to operate related equipment. Closing Statement The hours of work including days off and work area may be subject to change consistent with operational requirements and the provision of the Collective Agreement and applicable statutes. Successful applicants may be required to complete a Criminal Records Review Check.As per the current Public Health Orders, as of October 5, 2023, all employees working for Vancouver Coastal Health must be fully vaccinated for COVID-19 or have received a single dose of the most-recent, updated COVID-19 vaccine. Proof of vaccination status will be required.WHY JOIN VANCOUVER COASTAL HEALTH?VCH is a world class innovator in medical care, research and teaching, delivering service to more than one million BC residents. At VCH, we embrace thinking boldly, taking smart risks, and 'going first' when we believe it will lead to the best possible outcomes for patients and their families. We invite you to join us in creating healthy lives in healthy communities by showcasing our passion for care, connection to the communities we serve and our culture of teamwork that makes VCH a great place to work.• Comprehensive health benefits package, including MSP, extended health and dental and municipal pension plan• Grow your career with employer-paid training and leadership development opportunities• Wellness supports, including counselling, critical incident and innovative wellness services are available to employees and their immediate families• Award-winning recognition programs to honour staff, medical staff and volunteers• Access to exclusive discount offers and deals for VCH staff Equity, diversity, and inclusion are essential to our goals of creating a great place to work and delivering exceptional care. We acknowledge and accommodate unique differences and ensure special measures are in place so that all prospective and current employees are given an opportunity to succeed.We are committed to building a representative workforce and encourage applications reflecting diversity of sex, sexual orientation, gender identity or expression, racialization or ancestry, disability, political belief, religion, marital or family status, age, and/or status as a First Nation, Metis, Inuit, or Indigenous person.Vancouver Coastal Health is proud to be recognized as one of Canada's Top 100 Employers in 2024.Only short-listed applicants will be contacted for this posting. ***Employees of VCH must apply online via the Internal Career Portal on CareerHub, you are currently viewing the External Career Portal. Refer to the https://my.vch.ca/working-here/job-postings site for instructions on how to view internal job postings and how to apply as an employee. Current VCH employees who apply to this posting using this external site will be considered as an external candidate. Seniority will not apply.***Thank you for your interest in Vancouver Coastal Health. Options Apply NowApplyShareEmail this job to a friendRefer Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed Application FAQsSoftware Powered by iCIMSwww.icims.com

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: Safety First. Our number one core value. If we cant do it safely, we dont do it at all. Integrity. We lead by example, with humility and courage. Accountability. Were passionate about delivering on our commitments. Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being Believe in helping you build your career through our Aecon University and Leadership Programs Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. Are a leader in sustainable construction. With a strong commitment to operating responsibility by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our people. Were always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! About Us The Shoreline Power Group is a fully integrated Joint Venture of Aecon, United and AtkinsRalis located in Kincardine, Ontario. Shoreline Power Group is the centerpiece of the Major Component Replacement (MCR) program which replaces the main components of 6 reactors at the Bruce Power Nuclear Generating Station. The scope of work includes the removal and replacement of calandria tubes, pressure tubes, and feeders as well as construction management and trade labor. This project is part of Bruce Powers Life Extension Program, which will allow Bruce Powers CANDU units to continue to operate safely through to 2064. Reporting to the Equipment Manager, the Electrical/Mechanical Technician is responsible for supporting any tooling designs, preventative maintenance, and repair activities associated with MCR Feeder Welding and Fuel Channel Replacement Welding Equipment. What You'll Do Here Responsible for all electrical and mechanical maintenance on the MCR project Weld Tooling Responsible for install, conducting repairs and troubleshooting on Welding tools Develop tooling repair/maintenance procedures as applicable for each of the different project equipment sets, using knowledge of manufactures specifications and design intent Provide expertise and work closely with supervisors, tooling engineers, welders, mechanics, multiple trades, utilizing different tooling systems designs Prepare and coordinate all required activities to ensure that site conditions are suitable for the planned refurbishment activities, prior to mobilization to the site Maintain a regular job-site presence to provide hands- on support for all required tooling maintenance and repair activities Manage the procurement and storge of all required spare tooling, components, and consumables; ensuring that all components are available for optimal tooling performance Ensure that the project Weld tooling and equipment is correctly configured for the respective operation Perform and record all required preventative maintenance activities on the respective Weld tooling Participate in any tooling related troubleshooting activities required during tooling development and/or operations at site Report all tooling issues and Human Performance issues, to Supervision Support emergent tooling development activities Preparation of Aecon Technical Specifications and requisitions for all tooling spare components, consumables, including special purchasing instructions based on the tooling design Ensure all work is performed in accordance with respective tooling maintenance manuals and Aecon Red Book Safety requirements Ability to interpret Aecon and customer drawings/schematics, codes, standards, procedures and communicate findings with the applicable project personnel Ensure process control is maintained throughout critical tooling maintenance and operation Manage and maintain comprehensive spare component and consumable inventory to ensure proper tooling operation Maintain and execute regular preventative maintenance on all program tooling to ensure optimal operation Provide OPEX on tooling design changes that would optimize tooling maintenance and performance operation Other tasks as assigned What You Bring To The Team Graduate of Electrical/Electronic/Mechanical Program or equivalent, or equivalent practical experience Relevant work experience in a manufacturing/fabrication, industrial or related industry Strong working knowledge of electrical/mechanical schematics and use of proper diagnostic equipment are essential Previous maintenance experience is an asset Manual disassembly/assembly of equipment, electrical/electronic components and umbilical assemblies are essential Knowledge of Liburdi welding systems and equipment is an asset Strong written, verbal communication and problem-solving skills Working knowledge with MS based computer applications Work well in a Team Environment Physical Demands Field Site Environments Work in respirator and plastics as required Ability to work in Zone 3 Radiological environment Travel between work sites as required Extensive reading Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the ACA and its applicable regulations. If you require accommodation under the ACA during any step of the application process please click here.

OpportunityAre you interested in engineering and working hands-on with aircraft? A career in the Canadian Armed Forces (CAF) as an Aviation Systems Technician lets you handle, service and maintain CAF aircraft, ground equipment and associated support facilities.Overview Aviation Systems Technicians are responsible for maintaining aircraft aviation systems, like propulsion, airframe, basic electrical and all related components, as well as:Testing, inspecting and repairing aviation systemsPerforming quality assurance checksPreparing and maintaining aircraft forms and statistical dataPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icingOperating aircraft support equipmentTo be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education)Paid Education OptionsNon-commissioned Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college.Work EnvironmentAviation Systems Technicians work at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft and on the flight line. They may also work with tactical helicopter field units and on ships. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Aviation Systems Technicians TrainingAviation Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to Canadian Forces School of Aerospace Technology and Engineering and take their Trade Training over 23 weeks. This includes:Theory of flight (fixed and rotary wing)Basic electricalAircraft structuresPropulsion systemsWiring and solderingAircraft servicingAircraft instrumentationAircraft publicationsAircraft safetyFlight controlsHydraulic, fuel, brake and de-icing systemsEnvironment control systemsAvailable Specialty TrainingAviation Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniqueAircraft Specific Type CoursesAircraft Engine Type CoursesLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators CourseAvailable Advanced TrainingAs they progress in their career, Aviation Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management CoursesRequired Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned.Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Aviation Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

Millwright certification an asset but not required.*Qualifications: 3 years' Field Service experience. Background in PLC and computer controls. Excellent troubleshooting capabilities with the ability to take logical approach to problem solving. Knowledge of CNC controls such as: Fanuc, Mitsubishi, Heidenhain, Siemens. Knowledge/experience maintaining fully automated equipment. Ability to use technical manuals and read mechanical and electrical drawings. Ability to use high precision tools. Computer literate. Available to work outside of regular business hours and perform on call support as required.Millwright certification is an asset.*Responsibilities: Install and commission new and used CNC machinery (Milling, Lathe and EDM). Troubleshoot hydraulic and pneumatic systems, gear box and bearings on all CNC equipment. Perform basic electrical trouble-shooting.Plan and assist in the implementation of a rigorous, preventative maintenance program as well as a predictive maintenance program to minimize machine downtime.

#LI-OnsiteStatus: Regular Full Time Working Conditions: On-SiteEducation Level: Grade 12 or equivalent and 2-year college diploma in a related field of study*Location: Des Joachims Generating Station - Rolphton, ONNumber of Position(s): 2Shifts(s): DaysTravel: Yes- 10%Deadline to Apply: February 29, 2024Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of  Electrical & Control Technician/Technologist, to join our team at Des Joachims Generating Stationin Rolphton, ON.Reporting to the Trades Management Supervisor, this position is responsible to maintain and overhaul all electrical/ electronic/control/protection/telecommunication associated with generating stations and facilities.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES Install, commission, inspect, troubleshoot, service, maintain and overhaul and assist with the design for all electrical/ electronic/control/protection/telecommunication or testing equipment, associated with generating stations and facilities. Take appropriate preventative or corrective action.Prepare electrical, control, instrumentation, protection and telecommunication sketches, drawings, and bills of material. Carry out document maintenance activities.Co-ordinate large projects or highly complex maintenance enhancements related to the installation of new electrical systems, or the replacement of existing systems with different technologies.Carry out contract coordination and inspections to ensure effective quality assurance.Assist in the design of Programmable Logic Controllers (PLC) programs as required for the efficient operation of the station. Experience in programming Modicon PLC using Unity Pro.Experience in networked PLC's related to PLC maintenance, configuration, programming, testing, control systems expertise, troubleshooting field devices alarms/ failures.Experience in Supervisory Control and Data Acquisition (VT SCADA), specifically integration, screen and tag modifications and verification of end devices interfacing with SCADA.Experience with communications related to PLC's, SCADA, Protections and Metering to troubleshoot communication failures to networked equipment.Setup, install, programming and connecting of servers/ network switches/ modems/ routes/ gateways. Installation, repairs and commissioning of new network cables.Modify, Commission, and Maintain VT SCADA system in accordance with Regulatory Governance.Commission, programming, and perform field testing on various protection relays used in the power industry (GE, BECKWITH, SEL etc.) Install, commission, inspect and test High Voltage (HV) Equipment including HV Breakers and HV Transformers.Carry out a variety of measurements including testing of electrical, control and protection equipment to recognized standards and procedures.Determine generating system reliability and power system production. Develop and maintain supplementary computer programs to facilitate analysis.Participate in studies associated with energy production, load and capacity, demand management, etc., and provide regular and on- demand reports. Establish and maintain documentation / program files.Perform Level 5 Work Protection activities.Provide technical support, advice, coordination and assistance with regard to emerging work, projects and daily routines, including the development of technical/operational solutions to problems.Prepare and modify technical procedures and standards and generate reports.Accountable for the health, safety & well being of self and others, in accordance with technical/operating procedures and standards, and includes the development of technical/ operating solutions to problems.EDUCATIONGrade 12 or equivalent and 2-year college diploma in a related field of study**Relevant Field of Education includes: Instrumentation Tech/Technologist; Electrical Tech/Technologist; Electronics Tech/Technologist; Electromechanical Engineering TechnologyQUALIFICATIONSHold a valid Certificate of Qualification (309A or 442A)Electrical license in Industrial or Construction preferred5+ years of experience as an electrical and control technician/technologistPreference to applicants with experience installing, maintaining, inspecting High Voltage Equipment Experience programming and troubleshooting Modicon PLCs using Unity Pro is considered an assetWork as part of a team in a fast paced, dynamic environment, with tight deadlines and expected high level of detail Have exceptional problem solving abilitiesPossess strong communication and interpersonal skillsDays based position, but flexibility required to work weekends as necessaryBe eligible to work in CanadaThe successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enough Inclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., February 29, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted..

#LI-OnsiteStatus: Regular Full TimeWorking Conditions: On-Site     Education Level: Grade 12 or equivalent plus 8,000 hour apprenticeship, and/or 2 years of further study in a related field Location: Toronto, ONShifts(s): DaysTravel: Yes- 75%Deadline to Apply: March 1, 2024.Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of Electrical and Control Supervisor within the Performance and Testing Dept. - Advanced Inspection & Maintenance – Enterprise, based at our Kipling site, in Toronto, ONReporting to the FLM, Performance and Testing, the Electrical and Control Supervisor is responsible for supervising a team that will carry out the installation, trouble shooting, calibration, monitoring and modifying of flow, pressure, temperature, level, pollutant concentration, and custom data acquisition systems. The successful candidate will be expected to take on a technical leadership role in one or more major testing programs, which may include hydro-electric thermal turbine testing, emissions testing, nuclear thermal performance testing, nuclear emissions / regulatory testing, Relative Accuracy Test Audits (RATAs), fossil plant thermal performance tests, etc. The Electrical and Control Supervisor is accountable for overseeing the setup and troubleshooting of the test program setups, supplying technical guidance and expertise to improve test methods/systems, and working with the lead test Engineer(s) to ensure the successful completion of the test. The ideal candidate will thrive in a team environment with high accountability, autonomy, and fast-paced work. This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES  Be accountable for supervising, directing, and working alongside other Technologists/Technicians in the setting up and performance of plant testing and related activities,Act as an effective mentor to less experienced Technicians/Technologists who require working knowledge associated with taking high accuracy field measurements of power generation equipment.Be accountable for the maintenance and reliability of work equipment and areas of work, including calibration, installation and maintenance of test instrumentation, and computer data acquisition systems designed for power plant performance testing programs.Carry out and maintain Technician/Technologist tests planning, scheduling, preparation, and execution.Contribute to engineering and performance studies and development of testing methods, instrumentation and techniques relevant to Thermal, Hydroelectric and Nuclear within scope of accountability.Participate in the test program, assisting with such activities as: recording measurements and trouble shooting.75% travel is expected, since the test programs occur across the OPG fleet, and will involve frequent Monday-Friday stays, potentially within remote locations in the province, and depending on the work, outside of the province.EDUCATIONGrade 12 or equivalent plus 8,000 hour apprenticeship, and/or 2 years of further study in a related field  QUALIFICATIONSAt least 5 years of experience as an industrial electrician or equivalent experience in an industrial testing role as a technician.  At least 5 years prior experience in a supervisory, lead, foreman or management role leading a crew of journeymenStrong commitment to Safety, Environmental Compliance, and Teamwork;Proven organizational skills, high work standards, strong technical abilities and personal accountability;Ability to maintain excellent records and documentation control;Experience with reading and interpreting measuring tools, graphs, and technical manuals;Strong computer skill in MS Word and Excel;Experience in data acquisition and testing in an industrial environment.Flexibility to travel as necessaryValid G class Driver’s License in good standing.The successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enoughInclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., March 1, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted..

The Opportunity Responsible for assembly of new or rebuilt crane and/ or utility equipment The Role Responsibilities will vary depending on level attained (A, B, C or D). Responsible for assembly of new or rebuilt crane and or utility equipment sold by Wajax Industries in a safe, efficient and capable manner. Is familiar with all crane and utility equipment the company represents and that he is required to assemble. Responsible to oversee and works closely with other Installers in a mentorship capacity. Is familiar with company policy and procedures and abides by them consistently Is responsible for install of all electrical components, wiring, assemble of electrical power boards, throttles and controls, test and trouble shoot Perform assembly of all hydraulic systems required for unit, including, PTO and pump installations, plumb entire truck, minor electrical, minor welding and fabrication, test and trouble shoot hydraulics, install sub frame, device, body onto unit. Assembly of bolt on items, drilling, basic electrical, basic hydraulics, decaling unit, prepare units for pre-delivery inspections. Assemble bolt on parts, prepare parts for install group, shipping and receiving Participate in all required Health & Safety Training. Comply with the Health & Safety program and practices. Performance of daily duties in a manner conducive to a safe workplace The Candidate Education: High school diploma and Crane Utility Fleet license Work Experience: 1-2 years (D); 2-3 years (C); 4-5 years (B); 5-7 years (A) Knowledge: working knowledge of hydraulics; specialized in electrical systems; experience with welding/fabrication The Company Since 1858, Wajax has been a leading industrial products and solutions provider continually innovating to serve Canadian industry coast-to-coast. We work in an extensive range of industries and core sectors of the Canadian economy including energy and renewables, food and beverage, construction, industrial/commercial, transportation, forestry, mining, metal processing, and oil and gas - to name a few. Everything we do is powered by people passionate about making a difference and who are dedicated to driving Canadian industry forward. People who provide the experience and expertise that support the industries that build our cities, power our businesses, put a roof over our heads and food on our tables. Wajax offers a total compensation package that includes competitive pay, comprehensive benefits, learning and development, as well as some unique additional “perks.” Highlights include: Competitive health and dental benefits with no waiting period for eligibility (100% employer paid premiums), plus health spending account. Wajax led e-learning, and product training through industry leading manufacturers. Exclusive discounts with a variety of manufacturers and service providers such as Ford, GM, Chrysler, Dell, TELUS, a group mortgage, home & auto insurance program, pet insurance, footwear & workwear, fitness membership, perkopolis, and more. Recognition program where points are earned for merchandise or gift certificates, plus cash awards. Flexible work arrangements. Award-Winning Health and Wellness Program. By working with Wajax, you become part of an inclusive and diverse team that is dedicated to innovation and teamwork. We are committed to employing a workforce that is representative of the diverse communities across Canada in which we do business. As an equal opportunity employer, please inform us if any accommodation is required if contacted for an interview. As a condition of employment, final candidates will be subject to pre-screening. \\ Together we get more done.

Closing Date: April 3, 2024 Reporting to the Electrical Supervisor, the Electronics Technician is responsible for maintaining and troubleshooting mobile telecommunications systems such as mine dispatch, two-way radios, camera systems, mobile equipment monitoring connectivity, shovel payload systems, and other similar systems to maximize system performance.This position will also provide development support to various improvement projects, including Wireless Local Area Network (WLAN) and drill Global Positioning System upgrades. This role follows a 4x4 days schedule with 12-hour shifts; however, is subject to change depending on operational requirements.To be successful, we are looking for someone with strong interpersonal and communication skills, who can interpret electrical drawings and service manuals, research new technologies, and make recommendations for system upgrades and improvements. This person works well independently and collaborates successfully with a team. The ability to learn various types of software is vital for success.Join us in the breathtaking Elk Valley of British Columbia! Here you will find outdoor adventure at your fingertips. Whether it's biking and skiing, or the laid-back atmosphere of fishing and hiking, there is something for everyone! Come experience what work life balance is all about!Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures Install and maintain electronic equipment, such as data radios, Wenco Pit Control equipment, GPS systems, PLC based control systems, field equipment, shovel payload systems, two-way repeaters, flow meters, machine monitoring systems, and high voltage monitoring systems Develop best practices, job procedures, and troubleshooting guidelines Maintain remote monitoring systems, such as pit dewatering, water storage, pumps, WIFI systems, pit control system, and tire monitoring Provide training and mentorship Qualifications: Diploma in Electronics or Electrical Engineering Technology, or equivalent Experience with set-up, tuning, and adjusting radios, repeaters, and antennas Experience with DC and AC analog, digital drive control systems, and PLC programming Experience with installation and troubleshooting of computer hardware such as Wenco Dispatch, Keyscan, Carlson, Bench Manager, Tyresense, MEMS, GPS, and Terrain (Drills) Strong digital proficiency, with strong experience in Microsoft Office Suite® About Teck Benefits:Teck employees receive a competitive compensation package that includes, but is not limited to, base salary plus the following benefits: Two Annual Bonus Plans Comprehensive Benefits Plan Retirement Package Employee Share Purchase Plan Health Lifestyle Account Salary Range: $80,000 - $99,000The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Successful candidates must be willing to satisfy the pre-employment requirements of a pre-employment drug screen and three professional references.About TeckAt Teck, we value diversity. Our teams work collaboratively and respect each person's unique perspective and contribution.We wish to thank all applicants for their interest and effort in applying for the position; however, only candidates selected for interviews will be contacted.Teck is a diversified resource company committed to responsible mining and mineral development with major business units focused on copper, steelmaking coal and zinc.Teck has been named one of Canada's Top 100 Employers and is one of Canada's Top Employers for Young People .The pursuit of sustainability guides Teck's approach to business. Teck has been recognized as one of the Global 100 Most Sustainable Corporations by Corporate Knights and is ranked #1 in the Metals and Mining industry on the S&P Dow Jones Sustainability World Index (DJSI).Headquartered in Vancouver, Canada, its shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK.Learn more about Teck at www.teck.com or follow @TeckResources .Job Segment: Coal Mining, Electronics Engineer, Electrical Engineering, High Voltage, Mining, Engineering, Energy Apply now »