Overview of salaries statistics of the profession "Fire Protection Systems Technician in Canada"

Red Seal Journeyman, and Apprentice Plumbers: Harvey 2329 We are an established plumbing and heating company, which is focused on the Residential and Commercial projects.We are currently looking for qualified individuals, to join our growing team.Experience required:Comprehension of plumbing system fundamentals, and designDemonstrate safe work practices at all timesMust be able to work in tight spacesMust be trustworthy, honest, and punctualWork in a fast-paced environment and adapt quickly to new proceduresPositive attitude, flexible, and a team playerAble to do service-based work also a must.Plumbing Red Seal / A or B Gas ticketCross Connection Certificate (not necessary but preferred)Electrical endorsement (not necessary but preferred)Clean driving record, and drivers abstractProven working experience as a plumberAbility to handle plumbing tools and equipment like, (pipe wrenches, pipe cutters, plungers etc.)Good communication and interpersonal skills with clients and office staffMust be comfortable working with mobile devices / will provide training if needed. (iPhone, android tablet)Maintain a clean, organized vanBe available as the on-call technician one week out of every sixAbility to Perform skilled plumbing tasks in installing piping, fitting, tanks and valves in water systems and hot water systems, including mains and branches; and maintains and repairs plumbing, heating, ventilation, gas, fire protection, and site drainage. Boiler experience, also an asset. This is a fulltime positionSalary is based on working experience, and qualifications listed below.3rd year and 4th Year Apprentices - $25 per hour, to $35 per hourJourneyman - $35 per hour, to $39 per hourBenefits package is available after 3 months  

Installation Technician - Fall Protection Systems:  Harvey 2490We are an industry leader in providing permanent fall protection systems for both new construction & retrofit construction projects.Our company has been engineering, supplying, installing and inspecting permanent fall protection solutions since 1993.We are currently looking for a full-time Installation technician in our Calgary Office.The right candidate should be proficient in performing the following primary duties:Perform installations of fall protection systems, anchors and equipment to new construction and retrofit building industrial projects.Review of project drawings, layout of proposed anchor systems in preparation and coordination with all required parties.Organize shipment of product, packing slips and job-site instructions for installation to job-site on a timely basis and follow-up with Project Superintendent to ensure a proper installation will be achieved.Ensure a complete and timely installation has been carried out. Inspect project work prior to leaving site and if final assembly has occurred, request production of Log Book & Comprehensive Report Package for client.Complete required site review reports and internal documentation and return to your immediate supervisor as required.Follow all Company, Legislative and Job-Site safety policies and procedures.Assist with other installation and inspection personnel when required.Maintain a high level of communication with customers and Atlas staff.Assist with large projects as required. Out of town and out of province work will occasionally be required to allow Atlas to meet our clients and contractual needs. Qualifications: Knowledge and understanding of fall protection systems is required.Basic electrical and instrumentation knowledge is desirable, and not mandatory.Ability to read architectural and structural drawings.Proven ability to complete projects according to outlined scope, budget, and timeline.Proven ability to solve problems creatively.Comfortable working at heights including leading edge work.Experienced using hand and power tools.Strong interpersonal skills and extremely resourceful.Ability to work with minimal oversight but willing to follow directions closely.Must possess a valid drivers' license and reliable vehicle as some travel is required.Must be fluent in English language, spoken and written.Applicant may be required to complete and pass a Drug and Alcohol test on some work sites. The successful applicant will be professional and thrive in a fast paced, ever changing, and detail-oriented environment. This is a fulltime positionRemuneration includes a competitive salaryBenefits package is available after 3 months

Plant Protection TechnicianHigh Level, AlbertaType: Full-TimeReporting to the Maintenance department, the Plant Protection Technician will ensure thatemployee safety, company assets and the environment are adequately protected, as well as ensuring that Fire Protection Systems are operational and that the emergency response systems are activated when required.On-the-job training is provided, along with competitive pay and benefits. The wage for Plant Protection Technician is $31.34/hour.What We’re Looking For:This position requires excellent written and verbal communication skills and good computer skills.Ability to liaise with both internal and external stakeholdersA sound understanding of the Alberta Occupational Health and Safety legislation and Alberta Fire Code is important.The successful candidate must have the physical ability to work 12-hour shifts on a 4 on/4 off swing shift.What We Offer:An unyielding commitment to your personal safetyCompetitive pay and exceptional benefitsThe opportunity to work with the best and brightest in the industryA positive, dynamic, and inclusive work environmentAn open, innovative culture with diverse opportunitiesA commitment to investing in our people through training and developmentThe chance to live (and play) where you workWant to know what it’s like to work for Tolko?Click hereWhat is it like to live and work in High Level, AB? Watch this video to find out why life is better here!Who We Are:With state-of-the-art operations across western Canada, Tolko is a leading manufacturer of a wide range of forest products for customers around the world. For over 60 years, our family-owned company has been recognized by customers and business partners for being reliable, flexible, efficient and offering quality products. With the third generation of family leadership, we’re continuing that legacy today in our divisions throughout western Canada and joint ventures in the Southern United States.At Tolko, our values, vision and mission aren’t just what we believe. They’re how we work, live and serve our customers every day. Fundamental to our success is a diverse and committed workforce that thrives on change, building relationships, and a drive toward excellence.Grow Here, Achieve More:When you join Tolko, you’ll develop your skills and be encouraged to pursue diverse opportunities with a company that’s built on integrity, respect, and provides employees with the inclusive environment, support and opportunity to build great lives.If this position sounds like a fit for you, we’d love to hear from you! Applications will be accepted atwww.tolko.comuntil filled.We thank all candidates for their interest; however only those selected for an interview will be contacted.Follow us onLinkedIn,Facebook, andTwitterto stay up to date on Tolko news and job postings.#IND123

Mechanical - Fire Protection Designer:  Harvey 2573 We are currently seeking a self-motivated, hardworking Mechanical Fire Protection Designer to join our Vancouver, BC office.  This is an excellent opportunity for someone who is looking to gain valuable hands-on work experience in a dynamic, team-based working environment, as well as grow and develop their professional career within the consulting industry. What we are looking for:Assist with the preparation of drawings and schematics.Coordinate with other consulting disciplines to ensure drawing integrity and completeness.Work with project team and Project Manager to ensure on-time project completion.Escalate resource issues to the appropriate Project Manager.Review architectural and structural drawings.Perform system hydraulic calculations.Arrange sprinklers on the drawings in accordance with current NFPA standards.Verify drawings in accordance with established procedures.Work with contractors and respond to technical inquiries.Provide technical and administrative support through all phases of the project.Help establish and promote client relationships.Strive to ensure quality and timely delivery of finished products to clients.Overtime as required. Qualifications, Experience and Education:Completion of post-secondary education in a related field such as Mechanical Engineering, Fire Protection Engineering or Mechanical Engineering Technology, or Building Systems Technology.Working towards obtaining Applied Science Technologist & Technicians designation or Professional Engineers designation in British Columbia.3 - 5 years of relevant work experience in the design of building fire protection systems.Background developing construction documents using AutoCAD and/or Revit.Familiar with bid and tendering process.Familiarity with Microsoft Office tools including Excel, Word, Project, and PowerPoint.Experience working with customers and client base.Experience working in a team-based environment.Experience in site investigations and construction review is considered an asset.Experience in the design of water-based sprinkler protection systems.Previous experience with laying out and hydraulically sizing the fire protection system using commercially available software (ie. Tyco FOT and Elite Sprinkler). Required Skills:Excellent communication skills, both written and verbal.Proven ability to meet deadlines/successful completion of deliverables.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Able to communicate ideas and recommendations to non-engineer team members in a clear manner.Knowledge of Canadian Engineering standards.Advanced working knowledge of the provincial building code and NFPA standards.High level of sound and independent judgment and reasoning.Excellent time management skills and project management skills.Ability to work under pressure.Analytical, thorough, resourceful and detail oriented.Team and customer service focused.Self-motivated, hardworking, flexible.  This is a full-time position.Salary is open depending on experience.Benefits package available after 3 monthsThe opportunity to work on significant, innovative, and sustainable projects.Career development opportunities, including mentorship and training.Collaboration with other team members across CanadaComprehensive health and dental benefitsRRSP matching.Professional development fees covered.  

Intermediate Mechanical Fire Protection Designer: Harvey 2585 The opportunity:We are currently seeking a self-motivated, hardworking Intermediate Mechanical Fire Protection Designer to join our Vancouver, BC office.  This is an excellent opportunity for someone who is looking to gain valuable hands-on work experience in a dynamic, team-based working environment, as well as grow and develop their professional career within the consulting industry. What we are looking for:Assist with the preparation of drawings and schematics.Coordinate with other consulting disciplines to ensure drawing integrity and completeness.Work with project team and Project Manager to ensure on-time project completion.Escalate resource issues to the appropriate Project Manager.Review architectural and structural drawings.Perform system hydraulic calculations.Arrange sprinklers on the drawings in accordance with current NFPA standards.Verify drawings in accordance with established procedures.Work with contractors and respond to technical inquiries.Provide technical and administrative support through all phases of the project.Help establish and promote client relationships.Strive to ensure quality and timely delivery of finished products to clients.Overtime as required. Qualifications, Experience and Education:Completion of post-secondary education in a related field such as Mechanical Engineering, Fire Protection Engineering or Mechanical Engineering Technology, or Building Systems Technology.Working towards obtaining Applied Science Technologist & Technicians designation or Professional Engineers designation in British Columbia.3 to 7 years of relevant work experience in the design of building fire protection systems.Background developing construction documents using AutoCAD and/or Revit.Familiar with bid and tendering process.Familiarity with Microsoft Office tools including Excel, Word, Project, and PowerPoint.Experience working with customers and client base.Experience working in a team-based environment.Experience in site investigations and construction review is considered an asset.Experience in the design of water-based sprinkler protection systems.Previous experience with laying out and hydraulically sizing the fire protection system using commercially available software (i.e.. Tyco FOT and Elite Sprinkler).Required Skills:Excellent communication skills, both written and verbal.Proven ability to meet deadlines/successful completion of deliverables.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Able to communicate ideas and recommendations to non-engineer team members in a clear manner.Knowledge of Canadian Engineering standards.Advanced working knowledge of the provincial building code and NFPA standards.High level of sound and independent judgment and reasoning.Excellent time management skills and project management skills.Ability to work under pressure.Analytical, thorough, resourceful and detail oriented.Team and customer service focused.Self-motivated, hardworking, flexible.  This is a full-time position.Salary is open depending on experience. Benefits package after 3 months: The opportunity to work on significant, innovative, and sustainable projects.Career development opportunities, including mentorship and training.Collaboration with team members across Canada.Comprehensive health and dental benefits.RRSP matching.Professional development fees covered.  

*Meglab Construction*Work on site in the Montreal*Full time 40h/week*Mining site* Training provided internally.The incumbent will be responsible for the maintenance, calibration, repair, modification and installation of sprinkler systems such as water, air, foam, gas and fire pump equipment. Fire Protection Mechanic Journeyman/Apprentice Certificate of Competency;Applicable health and safety training certificates;Experience with water, air, foam, gas and fire pump systems (asset);Experience in Project Management (asset);D.A.R. inspection card (asset);Valid driver's license;Bilingual (asset);Resourceful.

EDMONTONWe are a global leader in the Earth and Environment sector. Globally headquartered in Montreal, where it all began, we proudly serve communities from coast to coast and beyond. We have over 14,000 multidisciplinary professionals worldwide collaborating daily to protect and conserve natural landscapes, create firm foundations for communities to stand on, and champion sustainable development to combat climate change. As part of the team, you will have access to an unparalleled network of resources, expertise, and endless opportunities to collaborate on exciting projects with diverse teammates from marine biologists to geophysicists to geotechnical engineers and more.The Opportunity:You will be part of our growing team, to work with a team of close-knit, like-minded, occupational hygienist, hazardous materials professionals, safety professionals, and technologists. Using your skills as an occupational hygiene technician to complete on-site assessments and monitoring. As a consultant, you will be providing occupational hygiene support to a variety of public and private clients. As the newest occupational hygiene technician, you will be working under the supervision of other experienced technicians, project managers and senior practitioner team members, with the opportunity to rapidly assume increasing autonomy and responsibility. WSP provides mentoring of all staff, all required safety and technical training courses, on the job shadowing, and training to maximize your learning opportunity. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future. #WeAre WSP A day in the life:You will have the opportunity to grow your career as a professional technician by: Applying your technical knowledge of methods, regulations, equipment, tools, systems, controls, and procedures. Make routine and non-routine decisions with guidance and with latitude of your supervising Project Manager. Work on a wide variety of assignments, scope of work and complexity. Providing project technical support and services, including:o Preparing and calibrating sampling equipment for field use,o Identifying site issues or project concerns and recommending corrective actions Providing occupational hygiene services, including:o Conducting site assessments for asbestos, mold, lead, PCB's, etc.o Sample collection in the field, data interpretation, and preparation of reports.o Interpreting and/or analyzing sample/data results in relation to legislative requirements and industry-accepted guidelines and criteria.o Supervising asbestos abatement activities. Conducting air quality assessments, including indoor air and occupational hygiene (i.e., IAQ, welding fume, noise) Basic client liaison to ensure health, safety, and occupational hygiene needs are addressed. Participate in the Health and Safety program. Participate in the Quality Control program. Engaging in technical training programs, Flexibility in meeting client schedules - evening, night, and weekend work may be required This position is approximately 90% field work, and 10% office-based with travel across Alberta and across Western and Northern Canada (for extended periods of time) with paid over-time as required. You'll be using your expertise to complete field surveys, write technical reports, collaborate with our many counterparts in all our different disciplines at WSP and provide expertise and client deliverables on projects. All other duties as required.What you'll bring to WSP ... Occupational Hygiene technician certificate, diploma from a chemical or environment programs or equivalent education such as technical, trade or college, and a Bachelor of Science (or similar) also acceptable. Eligible for membership in a professional organization is an asset but not a requirement. All levels of experience in Occupational Hygiene, hazardous material assessments (e.g., asbestos-related issues, lead, silica dust, etc.), is considered an asset. Experience working with a hazardous materials abatement contractor is an asset but not a requirement. Strong interpersonal, verbal, and written communication and you know your way around the MS Office suite of products. Must possess a valid Class 5 driver's license with no restrictions and access to a reliable vehicle, with appropriate registration and insurance. Requirement to wear personal protective equipment (i.e., respiratory protection, hard hat, high-visibility vests, fire retardant coveralls, safety boots, and safety glasses). A desire to broaden range of professional skills, adaptable, while managing a busy workload with proven problem-solving skills. Enthusiastic and versatile, willing to take on responsibility. Strong people and an ability to work in a team environment. You want to experience what it's like to work for the leading environmental consulting firm globally and be part of a growing and thriving team! WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

The Opportunity:Reporting to the Maintenance Supervisor, the Maintenance Technician is accountable to assisting with a full range of maintenance and repairs on all plant equipment and facilities.Support Asset Management and Maintenance Program. Document plans and results. The Maintenance Technician is responsible to support the Asset Management program focusing on the current active assets used to improve the reliability of our equipment. Duties & Accountabilities Attend DMP Daily Monday to Friday to start with Safety, Breakdown in last 24 hours, Weekly Preventive Maintenance Schedule, Projects. Start with Safety Moment. Directly support Asset Management Program cover 6 key areas (equipment, people, material, method, system, culture) to ensure a robust and successful solution. Follow procedure for daily inspection routine build around reliability techniques, testing, tags process from clean, adjust, inspection, lubricate and calibration. Ensure spare parts stocking Setup Maintenance shop base on drop off, refurbish and ready to go as per assets management workflow site Lead Refurbish maintenance (Q) activities  Coordinate efforts with equipment suppliers Safely maintains and repairs equipment used during the production of underground storage tanks and accessories Accurately utilizes purchase log, process sheets, and maintenance records Assists with rebuilding and making adjustments on portable tools, heaters, lift trucks, and other equipment and machines as required Assist with the maintenance of the electrical, hydraulic, plumbing, water connections and fittings, compressed air systems, air filters, and all heating and cooling equipment throughout the manufacturing plant Assist with the maintenance or arrange maintenance of fire sprinkler systems, static electricity arresters, and fire doors Other related duties as required  Skills & Qualifications DEC in Mechanical engineering or DEP in industrial mechanic or electro mechanic Valid driver’s license Minimum 3 to 5 years general maintenance experience in a manufacturing or industrial Availability to work weekends as needed Preference will be given to candidates having forklift experience / certification / Fall Protection / Aerial Lift Experience or certification General skills in operating tools and equipment and an understanding of the conditions that may impact their performance General understanding of building and equipment maintenance, mechanical, plumbing, and carpentry work Skilled in performing basic repairs Ability to work from wiring diagrams and equipment manuals for rebuilding equipment and manual repairs Demonstrated problem-solving skills and attention to detail Ability to communicate effectively with others and work as part of a team Ability to learn new tools and equipment as required for the position Ability to work at heights and within confined spaces when required Physical capabilities include bending, crouching, kneeling, and the ability to stand for extended periods of time

The Opportunity:You will be part of our growing team, to work with a team of close-knit, like-minded, occupational hygienist, hazardous materials professionals, safety professionals, and technologists. Using your skills as an occupational hygiene technician to complete on-site assessments and monitoring. As a consultant, you will be providing occupational hygiene support to a variety of public and private clients. As the newest occupational hygiene technician, you will be working under the supervision of other experienced technicians, project managers and senior practitioner team members, with the opportunity to rapidly assume increasing autonomy and responsibility. WSP provides mentoring of all staff, all required safety and technical training courses, on the job shadowing, and training to maximize your learning opportunity. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. What you can expect to do here: You will have the opportunity to grow your career as a professional technician by: Applying your technical knowledge of methods, regulations, equipment, tools, systems, controls, and procedures. Make routine and non-routine decisions with guidance and with latitude of your supervising Project Manager. Work on a wide variety of assignments, scope of work and complexity. Providing project technical support and services, including:o Preparing and calibrating sampling equipment for field use,o Identifying site issues or project concerns and recommending corrective actions Providing occupational hygiene services, including:o Conducting site assessments for asbestos, mold, lead, PCB's, etc.o Sample collection in the field, data interpretation, and preparation of reports.o Interpreting and/or analyzing sample/data results in relation to legislative requirements and industry-accepted guidelines and criteria.o Supervising asbestos abatement activities. Conducting air quality assessments, including indoor air and occupational hygiene (i.e., IAQ, welding fume, noise) Basic client liaison to ensure health, safety, and occupational hygiene needs are addressed. Participate in the Health and Safety program. Participate in the Quality Control program. Engaging in technical training programs, Flexibility in meeting client schedules - evening, night, and weekend work may be required This position is approximately 90% field work, and 10% office-based with travel across Alberta and across Western and Northern Canada (for extended periods of time) with paid over-time as required. You'll be using your expertise to complete field surveys, write technical reports, collaborate with our many counterparts in all our different disciplines at WSP and provide expertise and client deliverables on projects. All other duties as required. What you'll bring to WSP: Occupational Hygiene technician certificate, diploma from a chemical or environment programs or equivalent education such as technical, trade or college, and a Bachelor of Science (or similar) also acceptable. Eligible for membership in a professional organization is an asset but not a requirement. All levels of experience in Occupational Hygiene, hazardous material assessments (e.g., asbestos-related issues, lead, silica dust, etc.), is considered an asset. Experience working with a hazardous materials abatement contractor is an asset but not a requirement. Strong interpersonal, verbal, and written communication and you know your way around the MS Office suite of products. Must possess a valid Class 5 driver's licence with no restrictions and access to a reliable vehicle, with appropriate registration and insurance. Requirement to wear personal protective equipment (i.e., respiratory protection, hard hat, high-visibility vests, fire retardant coveralls, safety boots, and safety glasses). A desire to broaden range of professional skills, adaptable, while managing a busy workload with proven problem-solving skills. Enthusiastic and versatile, willing to take on responsibility. Strong people and an ability to work in a team environment. You want to experience what it's like to work for the leading environmental consulting firm globally and be part of a growing and thriving team! WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Change the future with us. We are looking for dedicated and talented people who tackle ever-changing challenges, customer needs, and questions from colleagues with clever concepts and creativity. We embrace change and work with curious minds re-inventing the future of work. Join us and let us focus together on what's truly important: making lives better with new ideas and the latest technology around the world.Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused - check out our communities! Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2024 and Greater Toronto's Top Employers 2022.What will you do?As Client Service Manager - Building Automation, you will foster relationships with assigned accounts in order to achieve agreed Order Intake budgets and maintain excellent customer relations. Continually review customer needs/demands and to advise on and optimize the activities of Service Technicians accordingly on all assigned service accounts i.e. maintenance visits, repairs, training demonstrations etc. Advise Service Supervisor and Dispatcher on service visits and handle all call-back problems Manage the Contract Renewal process for assigned accounts in conjunction with the Service Manager; Review and ensure contract costs are accurate to ensure repeat year on year profitable renewal Renewal costs to be sent to customer and agreed upon at least one month prior to end of contract year Be responsible for all aspects of small service work requirements from proposal stage to final close-out and invoice Generate customized competitive proposals for small system modifications repairs based on exact customer requirements Liaison with other contractors/sub-contractors where necessary to ensure site operations are fully co-ordinated; Negotiate the most cost effective solution for sub-contract suppliers and all other suppliers in-line with purchasing policies and procedures Collaborate with the Service Small Work Project Manager and handover some small work projects Liaise with Service Project Sales to share service leads and support the quotation process and maximize opportunitiesThis role will cover Calgary for the most part, with some projects in Edmonton & Vancouver. What will you need to succeed? 4 years in college/university in Mechanical and electrical engineering and/or HVAC knowledge or other strong field experience or an equivalent combination of education and related practical Building Automation Systems (BAS) experience Strong customer focus - able to sell small work manage service maintenance performance for outstanding customer satisfaction Proven organizational skills - able to plan effectively and prioritise workloads including the ability to multi-task and delegate effectively Self-motivated and calm under pressure; Good communication skills - verbal and written IT literate Commercially and technically aware Valid Driver's Licence in good standing is essential Asset: Building Automation Systems experience required; Fire and/or Security knowledge beneficialAbout us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/04/2024 02:10 PM

Technology driven, problem solvers Customers around the world trust in our products. Our service technicians and engineers significantly contribute to that. You are the first on the scene to solve any technical problem. You are a trusted adviser, team player, and make things possible. "Unsolvable" is a foreign term, and you go the distance. Your focus on the customers' needs makes you an invaluable partner. When you join our team, the possibilities are endless.Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2023, Canada's Top Employers for Young People 2023 and Greater Toronto's Top Employers 2023.What will you do? Conduct inspections of installed systems and complete inspection reports. Complete preventative maintenance for sprinkler systems. Repair, maintain and update sprinkler systems as required. Perform field repairs when required. Perform small retrofit. Location / territory: primary support for Ottawa ON, secondary support for Kingston ONWhat will you need to succeed? Licensed Fitter or working toward Licensed Fitter; enrolled in Apprentice program. 5 or more years of service experience. Ability to operate required equipment in a safe and responsible manner. Valid Driver's license in good standing. Flexibility to travel primarily throughout the Ottawa area, and Kingston area as needed, to client sites as required. Ability to work after hours and on the week-ends. Collaborative approach in a team environment. Strong customer relationship skills Strong English communication skills, both written and verbal. About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/05/2024 08:15 PM

Status: Regular Full Time Working Conditions: On-Site     Education Level: Highschool and and 2 years of college in Electrical Techician/TechnologistLocation: Bowmanville, ONNumber of Position(s): 2  Shifts(s): DaysTravel: NoneDeadline to Apply: February 29, 2024Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of Sr. Draftsperson – Electrical.This position is responsible to prepare all types of Electrical drawings and sketches for equipment and electrical systems for the purpose of design, procurement of materials, fabrication and installation in a nuclear generating station utilizing Computer- Aided Drafting system (CADS) technology. More specifically, this involves the preparation or revision of detail and study drawings for fabrication and construction, providing all pertinent information for electrical wiring diagrams, cable block diagrams, and other associated electrical drawings. Prepare bills of material to accompany given drawings. Enter data into On-line Wiring database. Participate in plant walkdowns to ensure configuration management is supported.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES Accountable for health, safety and well being of self and others in accordance with technical/operating procedures and standards, and includes the development of technical/operating solutions to problems.Accountable for self-checking in order to prevent and catch errors.As directed, obtain reference data, from files, associates or other groups. Review the preparation or production assignment to understand instructions and to determine a logical work approach. Study the given assignment to understand the scope and limits of detail drawing required. Perform calculations as necessary, using the principles of algebra, geometry and trigonometry or special formulae, which are supplied, with instructions of use. Refer to supervisor for guidance when conflicting or missing detail is encountered or production problems cannot be resolved. Contact other groups as directed to clarify problems or obtain missing information. Proceed with the preparation of drawings and resolve technical problems encountered.Participate in plant walk downs to ensure configuration management is supported.Prepare all types of electrical drawings using CADS technology: a) To portray modifications to established design schemes of apparatus, equipment and materials as to location, size, clearances, support quantity. b) To portray assembly for high and low voltage switching structures, grounding, lightning protection, allocation and routing of power/control cables and duct systems, prepare cable pans and conduit drawings), building services (power supplies, lighting, receptacle, HVAC (heating, ventilation and air conditioning) switchboards (control metering and relaying) and provision for such miscellaneous systems as telephone, public address radio communication, LAN cabling, security alarms and fire detection and control based on established design drawings and general requirement.Prepare Bills of Material, material lists, listing such features as material description, make and catalogue number, code markings and quantity for each different type of material shown on the drawings. Perform any necessary calculations. Make use of catalogues or the given data to compile the required detail.Provide verification checklists for safety related systems. Requires an understanding of channelization discrepancies (cable separation between channels, groups, and voltages. Ensure new cables have not been routed in overloaded cable trays. Status on line wiring to current built installations if requested.Show others, internal and external personnel, how the CADS work stations operate. Demonstrate the use of equipment, operating techniques, etc., to interested parties. EDUCATIONHighschool diploma2-years of postsecondary education in Electrical Technician/TechnologistQUALIFICATIONSUp to 10 years drafting experience;Proficiency using AutoCAD interface and Microsoft Office such as Wrok, Excel and Power PointExperience with Online – Wiring Database preferred;Strong written and verbal communication, collaboration and interpersonal skills for the purpose of gathering and relaying information, resolving issues of concern, etc.;Proven ability to work well with others;Good organizational and leadership skills, and to be a self-starter who can work both independently and in a team environment;Results and detail oriented individual;High integrity, upholding company values including Health and Safety, and protection of the environmentThe successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enough Inclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., February 29, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted..

Technology driven, problem solvers Customers around the world trust in our products. Our service technicians and engineers significantly contribute to that. You are the first on the scene to solve any technical problem. You are a trusted adviser, team player, and make things possible. "Unsolvable" is a foreign term, and you go the distance. Your focus on the customers' needs makes you an invaluable partner. When you join our team, the possibilities are endless. Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2022 and Greater Toronto's Top Employers 2022. What will you do? Siemens Canada in Montreal is currently seeking a Fire Alarm Technician to join our team in Service. In this role, you will be responsible for the maintenance and repair of fire alarm systems for our industrial, institutional, commercial, and healthcare clients. You will also have the opportunity to work in unique work environments such as mines, hospitals, and well-known buildings in Montreal. Responsibilities: Perform preventive maintenance and repairs on Siemens Desigo, XLS/MXL fire alarm systems, as well as any type of fire alarm product such as Vesda, Mircom, Simplex, Edward; Test fire alarm systems in accordance with various codes and standards; Diagnose technical problems and repair/correct them accordingly; Provide exceptional customer service by communicating in a professional and courteous manner; Participate in a rotating schedule every 15 weeks or 3 times per year; Ensure compliance with fire alarm standards and regulations, ULC-536-04 standards; Ensure compliance with ULC 537-04 and ULC 537-19 standards; Benefits of the role: Flexible scheduling to accommodate client needs (generally 8 AM to 4 PM); Possible overtime hours; Vehicle provided which can also be used for personal needs; Opportunity to work in unique work environments such as mines, hospitals, and well-known buildings in Montreal; Reimbursement of training fees with the Canadian Fire Alarm Association (ACAI/CFAA). Access to our Benefits programs as of Day 1 If you are a motivated individual focused on customer service and would like to join a leading company in the field of fire alarms, do not hesitate to submit your resume! What will you need to succeed? Have one of the following diplomas: DEP, AEC or DEC degree in electronics, Installation and maintenance of security systems, elecromechanic, Fire alarm experience Autonomy, resourcefulness and organizational skills Ability to occasionally work outside normal business hours and outside of the greater area of Montreal Valid driver's license Excellent knowledge of French, spoken and written Good knowledge of English spoken and written, a strong asset to interact with customers and colleagues across Canada; About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $$385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/08/2024 02:37 PM

Are you an experienced facilities technician looking for an exciting opportunity with a Fortune 500 company?Do you have experience in the maintenance and repair of HVAC, electrical, fire protection and electrical mechanical systems of Data Centers?If so, we want to hear from you! Click apply to this amazing opportunity with a fantastic, global fortune 500 company.Start Date: ASAPLocation: Varennes, QCDuration: 10 Months-with possibility of extensionSchedule: 12 hr days. 6am-6pm EST. 2 weeks on days 6am-6pm, followed by 2 weeks on nights 6pm-6am EST. Schedule would look like this: Week1 Sunday-Monday-Tuesday 36 hours. Week 2 Wed-Thursday-Friday-Saturday 48 hours.* You must have conversational level French**Job Responsibilities-Repairing and making improvements to building and infrastructure-Supporting and maintaining fire protection systems-Maintaining the distribution center's HVAC system-In depth understanding of the electrical and mechanical systems involved in critical data center operations such as: feeders, transformers, generators, switchgear, UPS systems, ATS units, PDU units, pumps, air handling units, and CRAC units-Familiar with BMS and EPMS control systems and data collection/trending-Proficient with maintenance management software (CMMS)-Completing preventative maintenance routines, documentation and procedures-Candidates should be able to lift up to 49 lbs and or work at heights and from ladders.-Flexibility with work hours and days. (24 hours a day, 7 days a week operation, including holidays)Qualifications:-Able to life 40 lbs consistently-2+ years experience in HVAC maintenance and repair-Preventative maintenance procedures-High school diploma or equivalent electrical and mechanical systems involved in critical data center operations such as: feeders, transformers, generators, switchgear, UPS systems, ATS units, PDU units, pumps, air handling units, and CRAC units-Familiar with BMS and EPMS control systems and data collection/trending-Proficient with maintenance management software (CMMS)-Ability to prioritize in a complex, fast-paced environment-Degree from a vocational school or college with a focus in the Mechanical or Electrical field- preferred 4+ years apprenticeship or equivalent experience in the Mechanical or Electrical field- preferred

Change the future with us. #LI-Hybrid We are looking for dedicated and talented people who tackle ever-changing challenges, customer needs, and questions from colleagues with clever concepts and creativity. We embrace change and work with curious minds re-inventing the future of work. Join us and let us focus together on what's truly important: making lives better with new ideas and the latest technology around the world. Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2024 and Greater Toronto's Top Employers 2022. What will you do? As a Fire Alarm Systems Designer, you'll have the opportunity to work with a passionate and experienced team, while participating in exciting projects that will shape the Quebec construction landscape for years to come. Under the supervision of the Fire Alarm Design Supervisor, you will work closely with colleagues from our National Operations Center and Project Managers on the preparation, methodology and execution of the work. You'll also have the opportunity to work in some of Montreal's most iconic buildings! We understand the importance of work-life balance, which is why this role will offer you the opportunity to work from home, with occasional in-person meetings. This position is an excellent opportunity for a fire alarm technician looking to take their career to the next level Responsabilities Ensure that projects are designed according to contract requirements (plans, quotes and sales estimates) and current codes, that project objectives are met, and that project completion policies are followed. Prepare design files according to Siemens standards in North America. Analyze plans, construction contract specifications and codes to determine project requirements and risks. Choose the right combination of products and installation methods to provide the most cost-effective solution. Participate in handover meetings between the sales team and the project execution team to assess the accuracy of sales estimates and project presentations. Prepare design and project completion documents, including load calculations. Understand requirements and design solutions for firefighting systems. Maintain clear communication with the project and design team regarding deliverables. Responsible for keeping within the allocated design budget. Keep up to date with Siemens fire design standards in North America. Keep up to date with fire code regulations. What will you need to succeed? College degree in electronics or equivalent or bachelor's Degree in electrical engineering 2 to 5 years' experience in fire alarms and fire detection systems Good knowledge of ULC524 and National Building Code, fire alarm section Working knowledge of AutoCAD, an asset Knowledge of other design software such as REVIT an asset Working knowledge of Windows, Office Suite CFAA (Canadian Fire Alarm Association) training, an asset Good knowledge of French (spoken and written) Written and spoken English to interact with colleagues nationally and internationally About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Siemens Canada is a technology leader providing comprehensive solutions for Smart Infrastructure and Digital Industries. We make real what matters by setting the benchmark in the way we electrify, automate and digitalize the world around us. Ingenuity drives us and what we create together in yours. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/09/2024 08:14 PM

We are on the lookout for a dynamic Lead Plumbing Engineer! Picture this: 3 days a week in our office at the forefront of a whirlwind of exciting projects that require quick turnaround. These projects involve existing retrofit work, using your technical application of plumbing, drainage, and fire protection design expertise across commercial, institutional, residential, and industrial sectors. You will be engaged in on-site project visits, face-to face interaction with clients, and have the chance to flex your technical capabilities and knowledge in an advisory role, while leading a team of 4. Why WSP? A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer, Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada; Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things; A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPA day in the life: Provide design, calculations, and technical support for the layout of plumbing and fire protection systems for building projects Size and layout domestic water, sanitary, storm, vent, and natural gas piping Size and layout sprinkler and standpipe systems based on hydraulic requirements of the systems Size and select domestic water booster pump sets, fire pumps, and sump pumps based on the hydraulic requirements of the associated systems Size domestic hot water heating equipment based on storage and recovery capacities Attend design meetings and coordinate design related work with other disciplines or consultants Conduct site investigations and prepare accompanying reports Convert markups into working CAD or Revit MEP drawings Review shop drawings and reply to requests for information submitted by contractors during construction phase Conduct routine site reviews during construction as part of the obligation to complete general reviews per OBC and to assure adherence to contract documentsWe'd love to hear from you if you have... Professional Engineer licensed in Ontario at a minimum. 10-15 years of experience in the design of plumbing and fire protection systems Well versed and familiar with applicable codes and NFPA standards for sprinkler and and standpipe systems including, but not limited to, the Ontario Building Code, NFPA 13-Standard for the Installation of Sprinkler Systems, NFPA-14-Standard for the Installation of Standpipe and Hose Systems, and NFPA 20-Standard for the Installation of Stationary Pumps for Fire Protection Strong working knowledge of AutoCAD MEP and Revit MEP Experienced with hydraulic calculation software Ability to travel to various project sites as required Willingness to be challenged with the resolve to "see projects to the end" WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Company DescriptionAbout Fairmont Fairmont Hotels & Resorts is where the intimate equally coexists with the infinite - an unrivaled portfolio of more than 90 extraordinary hotels where grand moments of life, heartfelt pleasures and personal milestones are celebrated and remembered long after any visit. Since 1907, Fairmont has created magnificent, meaningful and unforgettable hotels, rich with character and deeply connected to the history, culture and community of its destinations - places such as The Plaza in New York City, The Savoy in London, Fairmont San Francisco, Fairmont Banff Springs in Canada, Fairmont Peace Hotel in Shanghai, and Fairmont The Palm in Dubai. Famous for its engaging service, awe-inspiring public spaces, locally inspired cuisine, and iconic bars and lounges, Fairmont also takes great pride in its pioneering approach to hospitality and leadership in sustainability and responsible tourism practices. Fairmont is part of Accor, a world leading hospitality group counting over 5,400 properties throughout more than 110 countries, and a participating brand in ALL - Accor Live Limitless - a lifestyle loyalty program providing access to a wide variety of rewards, services and experiences.Job DescriptionThe Fire and Life Safety Manager will be responsible for overall contractual fire prevention and life safety program, preventative and corrective maintenance and delivery of a full inspection schedule to assist the Director of Engineering in the day-to-day work and oversee the preventive maintenance of all equipment.To assume all the responsibilities and authority of the chief engineer in his absence.To take regular training classes of Engineers and Staff.To check all logbooks daily and take corrective measures accordingly.To keep Chief Engineer informed of all the activities and incidence in the Engineering Department.To coordinate with the outside agencies or vendors for repair and maintenance work.To check the quality of engineering goods procured by the organisation.To obtain a thorough knowledge of firefighting appliances.Able to represent engineering department on HOD meeting during the absence of Chief engineer.Able to take decisions in order to ensure successful operation.Able to respond to emergencies in a timely manner.Able to effectively perform vendor management.Able to make quotation finalisation.Monitor and record utility consumption and assist the Chief Engineer to maintain efficiency.Maintain history card for all the plant equipment.Provide supervision and leadership to colleagues within his/her area of the Technical Services Department.Daily coordination of the technical services department in his/her area of responsibility.Advise on the duty roster for his/her area of responsibility.Should have good knowledge of Capex and Opex item.Prepare reports, maintain inventories, and keep accurate records, order equipment and supplies.Ensure correct maintenance of all equipment in conjunction with the other user departments.Stay abreast with the technological advances in surveillance & safety of equipment.Ensure that Operational problems are promptly brought to the attention of the Technical Supervisor.At regular intervals, inspect the working condition of equipment and engineering systems and ensure that all standards are maintained.Any other job or duties assigned by the management as and when required.QualificationsMust hold a two-year diploma in Fire Protection Engineering Technician or other program or trades/management experience deemed to be equivalentMinimum of 2-3 years of experience in a similar positionExperience inspecting Fire Systems in large building for Code compliance (e.g. emergency generators, life safety systems and substance surveys).Experience reading building mechanical and electrical drawings.Experience utilizing computerized database systems (e.g. SAP, CAD) and maintaining accurate records and logbooks related to fire safety code compliance.Additional InformationOur commitment to Diversity & Inclusion:We are an inclusive company, and our ambition is to attract, recruit and promote diverse talent.Salary: . Date posted: 04/17/2024 06:01 AM

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: · Competitive Starting Pay · Paid Training including Simplex Products· Global Advancement Opportunities · Company Vehicle (as applicable) · Referral Bonuses · Comprehensive Benefits · Medical/Dental/Vision insurance · Life Insurance · Short-Term and Long-Term Disability · Competitive Retirement Saving Plans· Employee Assistance Program · And more! HIRING HOURLY RANGE: $24-$34 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersWhat you will doThe main duties of a Johnson Controls Fire Alarm Installation Technician are to read and interpret engineered drawings and specifications, program, install, troubleshoot and verify Simplex Fire Alarm Systems with a strong focus on safety throughout all aspects of their role.How you will do itReporting to the Construction Manager, technicians will work closely with the Project Managers to obtain project information required to perform their duties.The Technician will then provide feedback to Project Managers regarding project scheduling and status as well as provide detailed Verification Reports. Technicians will assist Electrical Contractors during the installation, troubleshooting and verification process of Fire Alarm Installations ensuring that industry best practices are met throughout all phases of the installation process. Technicians will also be required to install and configure electronic components and terminate low voltage field wiring neatly and efficiently.Fire Alarm Install Technicians will collaborate with other Installation team members and may also be required to assist Project Managers and Engineering Consultants with Fire Alarm system design concepts including the production of detailed input-output Matrices.What we look forCompletion of a college diploma in Fire Protection or Electrical/Electronic or Licensed Electrician Working knowledge of provincial building codes. Proficient in the use of computers. Experience with PLC or computer programming an assetStrong troubleshooting skills with working knowledge of electronic test equipment. 3 years of experience as a Fire Alarm Technician is an asset. Proficient with the use of hand tools and small power toolsAbility to manage multiple large projects accurately and efficiently and adapt to changing customer needs. Ability to read and interpret schematic diagrams pertaining for Fire Alarm Systems and Ancillary Control CircuitsAbility to express clear technical solutions in a clear and concise manner. Ability to lift equipment and tools up to 40lbs. Ability to climb ladders and scaffolding. Possess a valid driver's license. Strong communication skills and customer service focusStrong focus on safety Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the CompanyJohnson Controls’ Canadian subsidiaries are committed to providing reasonable accommodation to applicants, candidates and employees with disabilities, in accordance with applicable human rights legislation, and in Ontario, in accordance with the Accessibility for Ontarians with Disabilities Act (“AODA”). When requested, accommodation will be provided throughout all stages of the recruitment and selection process. To request accommodation, please contact us. Any information you provide related to accommodation measures will be treated as confidential. A copy of Johnson Controls’ applicable AODA policies are available on our website at www.johnsoncontrols.com for your reference, and can be made available in accessible formats upon request.

Posting Title STO-RE 24R - Environmental Emergency Response Officer Position Classification Scientific/Tech Off R24 - Res Union GEU Work Options Hybrid Location Multiple Locations, BC CA (Primary)Nanaimo, BC V9T 6L8 CAVictoria, BC V9B 6X2 CASalary Range $76,071.18 - $86,658.48 annually Close Date 5/14/2024 Job Type Temporary (Auxiliary) Temporary End Date 3/31/2025 Ministry/Organization BC Public Service -> Env & Climate Change Strategy Ministry Branch / Division Environmental Emergency Branch Job Summary An opportunity to contribute your valued expertise in Environmental Emergency Response or Environmental ManagementThe Environmental Emergency Program mandate is to plan, coordinate, implement and manage a program to protect the human health and environment in the event of an environmental emergency or disaster. This is achieved through the administration of the Environmental Management Act and supporting spill regulations. The province receives between 5000 - 6000 spill calls a year through the provincial spill reporting hotline. As a technical expert in hazardous materials, the EERO's primary role is to determine how to manage, coordinate or respond to these spills.The Environmental Emergency Response Officer's (EERO) main focus is to protect the environment and the public by effectively managing hazardous material spill responses, hazardous wastes and industrial/municipal discharges. This is achieved through the administration and enforcement of the Environmental Management Act and supporting Regulations including the Spill Reporting Regulation, the Cost Recovery Regulation, the Hazardous Waste Regulation and the Contaminated Sites Regulation.Job Requirements: Degree in the natural resource field (including chemistry, biology, earth sciences, environmental engineering, environmental protection) and / or emergency management /spill response plus 2 years related experienceOR Diploma, or equivalent in the natural resource field (including chemistry, biology, earth sciences, environmental engineering, environmental protection) and / or emergency management /spill response plus 3 years related experienceOR Grade 12 with core grade 11/12 courses in the science and applied science focus areas plus a combination of 5 years related experience in the natural resource and / or emergency management /spill response fields such as on the job training within industry, government or other. Experience includes: Environmental emergency response including attending or responding to hazardous materials spills, assessing spill related hazards or threats to health or the environment, determining if spill response actions are necessary to address hazards or threats, and monitoring or supervising spill response actions. Environmental protection and pollution prevention including assessing environmental impacts or pollution associated with discharges of waste to the environment and characterizing and managing hazardous materials related wastes and hazardous wastes. Experience in emergency management (hazmat emergency response, spill response, cleanup and remediation, fire suppression activities, transportation of dangerous goods, spill contingency planning, oil spill response). Experience in environmental impact assessment from hazardous materials spills Preference may be given to applicants with: Degree or diploma in the natural resource management or related field (such as chemistry, biology, or environmental sciences). Hazardous Materials Technician certification based upon the requirements of OSHA 1910.120(q) and NFPA 472 standard Advanced Hazmat Specialist certification based upon the requirements of NFPA 472 standard Incident Command System (ICS) Certification Self-Containing Breathing Apparatus Certification (SCBA) Use of Personnel Protection Equipment Hazardous materials handling, transport and disposal technologies Industrial processes and associated hazards Hazardous materials classifications and properties and their behaviour when released to the environment, potential reactions and incompatibilities; Applicable legislation, regulations, policies and procedures and related standards and criteria; Chemistry, geology, environmental science and waste management; Contracting, administration, budgeting and accounting; Site characterization, monitoring and remediation procedures and processes; Spill response safety and planning Spill response certifications (i.e oil spill response, hazardous materials, in-situ burning etc.) Hazardous Materials Handling including TDG and WHIMIS certification Oil Spill Control training and equipment use Legal Sampling and Enforcement Level 1 First Aid Provisos Must be willing and able: to travel anywhere within the province. to travel out-of-province and country for training to hold a valid passport. to work irregular hours to respond to spills to represent the program at public meetings and events (as per Collective Agreement) Must hold and maintain a valid B.C. Class 5 Driver's License. Must be Hazmat Technician Certified within 1 year of being hired (Note:Upon employment, cost of training and accommodation is covered by the Ministry) For questions regarding this position, please contact [email protected] About this Position:Flexible work options are available; this position may be able to work up to 5 days at home per week subject to an approved telework agreement.1 position available: 1 temporary appointmentAn eligibility list for temporary and permanent positions may be established.Position is located in: Nanaimo or VictoriaEmployees of the BC Public Service must be located in BC at the time of employment.Working for the BC Public Service:The BC Public Service is committed to creating a diverse workplace to represent the population we serve and to better meet the needs of our citizens. Consider joining our team and being part of an innovative, inclusive and rewarding workplace.The Indigenous Applicant Advisory Service is available to applicants that self-identify as Indigenous (First Nations, status or non-status, Métis, or Inuit) seeking work or already employed in the BC Public Service. For guidance on applying and interviewing, please contact [email protected] or 778-405-3452.The BC Public Service is an award winning employer and offers employees competitive benefits, amazing learning opportunities and a chance to engage in rewarding work with exciting career development opportunities. For more information, please see What We Offer How to Apply:Your application must clearly demonstrate how you meet the job requirements list above.Cover Letter: NO- Please do not submit a cover letter as it will not be reviewed.Resume: YES- Ensure your resume includes your educational accomplishments, employment history including start and end dates (month and year) of your employment, and any relevant information that relates to the job to which you are applying. Resume may not be used for shortlisting applicantsQuestionnaire (COMPREHENSIVE): YES- As part of the application process, you will be prompted to complete a comprehensive online questionnaire to demonstrate how you meet the job requirements. Please allot approximately 60 minutes to complete the questionnaire.Helpful tips, videos and more regarding the application process can be found on the Your Job Application page of MyHR. If you are experiencing technical difficulty applying, e-mail [email protected] , before the stated closing time, and we will respond as soon as possible.Additional Information:A Criminal Record Check (CRC) will be required.Applicants selected to move forward in the hiring process may be assessed on the Knowledge, Skills, Abilities and Competencies as outlined in the attached Job Profile located at the bottom of the posting.Applications will be accepted until 11:00 pm Pacific Standard Time on the closing date of the competition.Job Category Natural Resource Sector, Scientific and Technical

The Opportunity: WSP is currently seeking a Fire Protection Consultant to join WSP in the Ottawa/East area. You will use your in-depth knowledge of Building and Fire Codes and Fire Safety Science to develop compliance solutions. With a background in fire safety engineering you will help develop alternative compliance solutions and systems that provide passive and active fire protection. In a client facing role, you will represent the organization as a leader in fire protection engineering and code consulting. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future. #WeAreWSPWhat you can expect to do here: Provide guidance and direction to Fire Protection Engineering staff to ensure operational and project delivery excellence Provide detailed innovative and strategic contribution to concept and detail design of projects Be active in representing the company through target industry organizations, acting as a recognized technical and thought leader Analyse buildings and systems, drawings and specifications and prepare approaches to code compliance for new and renovation projects Working with other professionals, you will deliver successful projects within exceptional quality, on-budget and on-schedule resultsWhat you'll bring to WSP: Proven experience as a Code Consultant/Fire Protection Engineer, preferably in a consulting environment A degree in Engineering or Applied Science. Preferably in Fire Safety Engineering. Previous experience in the design of fire suppression systems, fire pumps and water supplies for firefighting in commercial, healthcare, industrial and education projects A proven track record of experience in interfacing with municipal, provincial, and federal agencies, and the private sector Demonstrated ability to address challenging or turn-around situations in response to challenging priorities in the market Seen as a leader with a highly positive credibility factor Excellent technical, interpersonal and teamwork skills Excellent verbal and written communication skills WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.