Overview of salaries statistics of the profession "Fire Service Technician in Canada"

Electrical Revit Technician:  Harvey 2411Our Company is currently seeking a self-motivated, hardworking Electrical Revit Technician to join our Edmonton Office. Responsibilities: The Responsibilities of this position include but are not limited to the following:Interpret design mark-ups and draft electrical designs.Assist with the design of security, lighting and fire alarm systems in healthcare and hospitality, commercial, institutional and high-rise residential buildingsPrepare construction drawings as directed by Project Engineer and Project ManagerUtilize modern computer-assisted design (CAD) and Revit software for maximum quality and efficiency of producing construction documents. This includes all stages including concept through tender, addendum sketches, and as-built records.Process/prepare received documents for internal use (i.e. Clean-up of Architectural floor plans, sections in accordance with established procedures).Check and verify design drawings to conform to specifications and design dataPerform general duties as required such as printing/plotting, submitting drawings to contractor and completing mark-ups for ‘as builts’ and in turn updating companies recordsUtilize Adobe Bluebeam (PDF) to produce working and final documents.Utilize other software such as MS Office Suite (Word, Excel, and PowerPoint).Consistently follow company policies, procedures and file structures/format.Perform general duties as required such as printing/plotting/scanning/conversion/quantity take-offs/measurement.Attend meetings and conduct site inspections in combination with the Project Engineer or Design TechnologistAll duties to be performed accurately and efficiently in order to deliver quality product/service on schedule      The duties and responsibilities listed above are representative of the nature and level of work assigned and are not necessarily all-inclusiveOvertime as required Education & Experience:Post-secondary education in Electrical Engineering Technology and/or Building Systems OR the ability to  demonstrate sufficient knowledge received from previous work experience in a similar position is requiredMinimum 3 years relevant working in Revit and CAD in any or all of the following areas; lighting, fire alarm, security system is requiredElectrical knowledge is essential for the incumbent to be successful in the roleMechanical knowledge in HVAC and plumbing design is a definite assetDemonstrated experience in Revit, experience with AutoCAD and Visio is also an assetIntermediate proficiency with Microsoft Office Suite Package (Word, Excel, PowerPoint, Project, Outlook)Experience working in an engineering services environment is preferredRequired Skills:The position requires the incumbent to have competence with a variety of computer software including high proficiency with Revit (BIM); experience with AutoCAD is an asset.Intermediate proficiency with Microsoft Office Suite Package (Word, Excel, PowerPoint).Understanding of building systems, interference coordination with other building elements, function, and 3D visualization is considered as an assetElectrical and Mechanical knowledge would be an asset.Ability to meet deadlines/successful completion of deliverables.Ability to communicate and work well with other departments.Excellent time management skills with the ability to work under pressure on single/multiple tasks.Strong attention to detail.Team and client-focused.Completion of a college program in Drafting considered an asset.Knowledge received from previous work experience in a similar positon considered and asset.Job Specific Competencies:Analytical Thinking – Analyzing and synthesizing complex situations and information to understand issues identify options and support sound decision making.Attention to Detail – Working in a conscientious, consistent and thorough manner.Client Focus – Provides added value through service excellence to internal and/or external clients.Continuous Learning – Identifying and addressing learning and developmental needs to enhance own performance.Decision Making – Making decisions involving varied levels of risk and ambiguity.Information Gathering and Processing – Locating and collecting data from appropriate sources and analyzing it to prepare meaningful and concise reports that summarize the　information.Problem Solving – Identifying problems and the solutions to them.Resilience – Remains energized and focused in the face of ambiguity, change or strenuous demands.Results Management – Organizes time, work and resources to accomplish objectives in the most effect and efficient way.Teamwork – Working collaboratively with others to achieve organizational goals.Achievement Orientation - Focusing efforts on achieving high quality results to help others meet and exceed the organization’s standards.Initiative - Dealing with situations and issues proactively and persistently by identifying the immediate action needed and seizing the opportunities that arise. This is a fulltime positionSalary is open depending on current experienceBenefits package is availablePerformance bonus

Mechanical - Fire Protection Designer:  Harvey 2573 We are currently seeking a self-motivated, hardworking Mechanical Fire Protection Designer to join our Vancouver, BC office.  This is an excellent opportunity for someone who is looking to gain valuable hands-on work experience in a dynamic, team-based working environment, as well as grow and develop their professional career within the consulting industry. What we are looking for:Assist with the preparation of drawings and schematics.Coordinate with other consulting disciplines to ensure drawing integrity and completeness.Work with project team and Project Manager to ensure on-time project completion.Escalate resource issues to the appropriate Project Manager.Review architectural and structural drawings.Perform system hydraulic calculations.Arrange sprinklers on the drawings in accordance with current NFPA standards.Verify drawings in accordance with established procedures.Work with contractors and respond to technical inquiries.Provide technical and administrative support through all phases of the project.Help establish and promote client relationships.Strive to ensure quality and timely delivery of finished products to clients.Overtime as required. Qualifications, Experience and Education:Completion of post-secondary education in a related field such as Mechanical Engineering, Fire Protection Engineering or Mechanical Engineering Technology, or Building Systems Technology.Working towards obtaining Applied Science Technologist & Technicians designation or Professional Engineers designation in British Columbia.3 - 5 years of relevant work experience in the design of building fire protection systems.Background developing construction documents using AutoCAD and/or Revit.Familiar with bid and tendering process.Familiarity with Microsoft Office tools including Excel, Word, Project, and PowerPoint.Experience working with customers and client base.Experience working in a team-based environment.Experience in site investigations and construction review is considered an asset.Experience in the design of water-based sprinkler protection systems.Previous experience with laying out and hydraulically sizing the fire protection system using commercially available software (ie. Tyco FOT and Elite Sprinkler). Required Skills:Excellent communication skills, both written and verbal.Proven ability to meet deadlines/successful completion of deliverables.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Able to communicate ideas and recommendations to non-engineer team members in a clear manner.Knowledge of Canadian Engineering standards.Advanced working knowledge of the provincial building code and NFPA standards.High level of sound and independent judgment and reasoning.Excellent time management skills and project management skills.Ability to work under pressure.Analytical, thorough, resourceful and detail oriented.Team and customer service focused.Self-motivated, hardworking, flexible.  This is a full-time position.Salary is open depending on experience.Benefits package available after 3 monthsThe opportunity to work on significant, innovative, and sustainable projects.Career development opportunities, including mentorship and training.Collaboration with other team members across CanadaComprehensive health and dental benefitsRRSP matching.Professional development fees covered.  

Highland Valley Copper As Canada's largest diversified mining company, Teck is committed to providing the world with essential resources safely and sustainably. We have a rich history of consistently driving innovation, harnessing cutting-edge technology, and cultivating a dynamic environment that empowers our employees to shape the future.Teck Highland Valley Copper is currently accepting applications for the position of: Journeyperson HVAC Refrigeration Mechanic.Come join us in the Highland Valley and enjoy a variety of recreational opportunities, such as hiking, skiing, fishing, and golf! The mine site is a 50-minute drive from Kamloops, B.C. which provides all of the comforts of city living. We are also close to Merritt, Ashcroft, and Logan Lake, which all exude a small town community atmosphere.Responsibilities: Be a Courageous Safety Leader, through promotion and adherence to established Safety and Environmental policies and procedure Maintenance of gas fired heating and process systems, air conditioning and refrigeration systems, steam boiler, water boilers and building management control Perform in a team-orientated environment with various trades Maintain a clean, orderly and safe work environment Qualifications: Red Seal Refrigeration Mechanic B.C. Class 'A' Gasfitter ticket, or Alberta Class 'A' Gasfitter ticket, or equivalent if from other provinces Minimum of a valid Class 7N driver's license Familiarity with Reliable DDC controls would be an asset 4th Class power Engineering Certificate would be an asset High School Diploma, General Education Development (GED), or equivalent Strong interpersonalskills Ability to work independently and as part of a team Why Join Us? At Teck, we offer more than just a job - we provide a pathway to personal and professional enrichment. With captivating projects set against stunning backdrops, a culture of inclusivity and collaboration, and boundless opportunities to learn and grow, joining us means embracing a fulfilling and dynamic career adventure.Tradespeople are offered a comprehensive benefits package that includes but is not limited to: Comprehensive Benefits Plan including but not limited to medical, dental and vision Company Paid Pension Healthy Lifestyle Account Hourly Rate: $54.41 /HourJob Segment: HVAC, Mechanic, Engineer, Operations, Engineering Apply now »

Intermediate Mechanical Fire Protection Designer: Harvey 2585 The opportunity:We are currently seeking a self-motivated, hardworking Intermediate Mechanical Fire Protection Designer to join our Vancouver, BC office.  This is an excellent opportunity for someone who is looking to gain valuable hands-on work experience in a dynamic, team-based working environment, as well as grow and develop their professional career within the consulting industry. What we are looking for:Assist with the preparation of drawings and schematics.Coordinate with other consulting disciplines to ensure drawing integrity and completeness.Work with project team and Project Manager to ensure on-time project completion.Escalate resource issues to the appropriate Project Manager.Review architectural and structural drawings.Perform system hydraulic calculations.Arrange sprinklers on the drawings in accordance with current NFPA standards.Verify drawings in accordance with established procedures.Work with contractors and respond to technical inquiries.Provide technical and administrative support through all phases of the project.Help establish and promote client relationships.Strive to ensure quality and timely delivery of finished products to clients.Overtime as required. Qualifications, Experience and Education:Completion of post-secondary education in a related field such as Mechanical Engineering, Fire Protection Engineering or Mechanical Engineering Technology, or Building Systems Technology.Working towards obtaining Applied Science Technologist & Technicians designation or Professional Engineers designation in British Columbia.3 to 7 years of relevant work experience in the design of building fire protection systems.Background developing construction documents using AutoCAD and/or Revit.Familiar with bid and tendering process.Familiarity with Microsoft Office tools including Excel, Word, Project, and PowerPoint.Experience working with customers and client base.Experience working in a team-based environment.Experience in site investigations and construction review is considered an asset.Experience in the design of water-based sprinkler protection systems.Previous experience with laying out and hydraulically sizing the fire protection system using commercially available software (i.e.. Tyco FOT and Elite Sprinkler).Required Skills:Excellent communication skills, both written and verbal.Proven ability to meet deadlines/successful completion of deliverables.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Able to communicate ideas and recommendations to non-engineer team members in a clear manner.Knowledge of Canadian Engineering standards.Advanced working knowledge of the provincial building code and NFPA standards.High level of sound and independent judgment and reasoning.Excellent time management skills and project management skills.Ability to work under pressure.Analytical, thorough, resourceful and detail oriented.Team and customer service focused.Self-motivated, hardworking, flexible.  This is a full-time position.Salary is open depending on experience. Benefits package after 3 months: The opportunity to work on significant, innovative, and sustainable projects.Career development opportunities, including mentorship and training.Collaboration with team members across Canada.Comprehensive health and dental benefits.RRSP matching.Professional development fees covered.  

OpportunityAre you a problem solver? Do you love working with metal and machinery? As an Aircraft Structures Technician in the Canadian Armed Forces (CAF), you’ll maintain and repair military aircraft in Air Force bases in Canada and around the world. Overview Aircraft Structures Technicians are members of the air maintenance team who handle, service and maintain CAF aircraft structures and components like aviation life support equipment. Aircraft Structures Technicians are skilled in metal and composite repair, refinishing, painting, machining and welding. They are integral to aircraft servicing, supply, tool control and safety. Their primary responsibilities include:Inspecting aircraft structuresRestoring or repairing defects using unique aircraft fastening hardware, ferrous and non-ferrous materials, composite materials, chemicals, adhesives, paints and textilesManufacturing and installing aircraft structural components for prototype projectsWelding base metals, alloys and casting materialsManufacturing original aircraft equipment, components or replacement itemsFabricating and repairing aircraft structuresConducting corrosion control inspections of ferrous and non-ferrous materialsMaintaining life support equipment, ejection seats, fire suppression and oxygen systemsPerforming aircraft handling tasks, including parking, towing, marshalling, starting, refuelling, cleaning and de-icingPreparing and maintaining aircraft documentation and statistical dataTo be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Work EnvironmentAircraft Structures Technicians provide aircraft structural maintenance during Navy, Army and Air Force operations. Inspections and repairs are carried out on the aircraft; however, aircraft component maintenance is normally performed in a hangar or a shop. They are usually stationed at CAF wings and bases within Canada, including the Arctic, but may be deployed to locations throughout the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Aircraft Structures Technician TrainingAircraft Structures Technicians attend the Canadian Forces School of Aerospace Technology and Engineering in Borden, Ontario. Training takes approximately 65 weeks and includes:Shop mathematics and the use of measuring toolsInterpretation of mechanical drawings and blueprintsMetallurgy and identification of base metals, alloys and composite materialsFabrication of aircraft parts and aircraft sheet metal repairPerforming cutting and drilling operationsMachining external and internal surfaces using engine lathe and milling machinesInstallation of non-permanent fastenersRefinishing metal, synthetic and composite surfacesIdentification of types and use of paints, sealants, epoxies and mixing agentsWeldingAircraft servicingMaintenance of life-support equipment, ejection seats, fire suppression and oxygen systems Available Specialty TrainingAircraft Structures Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training, including:Quality Assurance – Special Metal WeldingAdvanced Composite RepairTechnical WritingNon-Destructive TestingLife Cycle Material ManagementComputer Numerical Control (CNC) Turning CentreCNC Machining Centre – OperationCNC Machining Centre – ProgrammingHelicopter Rotor Blade RepairAdvanced Selective Brush ElectroplatingAircraft-specific coursesCryogenic Bulk Storage and HandlingRecovery and Salvage Team Member Available Advanced TrainingAs they progress in their career, Aircraft Structures Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 General Math or Math 416 / Cultural, Social and Technical 4 in QuebecForeign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma. If you have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may place you directly into any on-the-job training program that is required, following Basic Training. Basic Training is required before being assigned.Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Aircraft Structures Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

Title:Fire alarm electronics technicianJob TypesRegular jobTerms of Employment:Full Time, PermanentSalary:$25.00 Hourly, for 30 to 40 Hours per weekAnticipated Start Date (at the latest in 3 months):As soon as possibleLocation:8711 50 street NW suite 207Edmonton, ABT6B 1E7(2 vacancies)OverviewLanguagesEnglishEducationSecondary (high) school graduation certificateExperience1 year to less than 2 yearsWork settingVarious locationsResponsibilitiesTasksInstall, maintain and repair electronic equipmentInspect and test electronic equipment and assembliesDiagnose and locate circuit, component and equipment faultsAdjust, align, replace or repair electronic equipment and assembliesComplete work orders, test and maintenance reportsPrepare cost estimatesAdditional informationWork conditions and physical capabilitiesAttention to detailFast-paced environmentBending, crouching, kneelingOwn tools/equipmentToolsEquipmentEmployer: J&K Electrical Services Ltd.How to applyBy emailBy mail8711 50 street NW suite 207Edmonton, ABT6B 1E7

EDMONTONWe are a global leader in the Earth and Environment sector. Globally headquartered in Montreal, where it all began, we proudly serve communities from coast to coast and beyond. We have over 14,000 multidisciplinary professionals worldwide collaborating daily to protect and conserve natural landscapes, create firm foundations for communities to stand on, and champion sustainable development to combat climate change. As part of the team, you will have access to an unparalleled network of resources, expertise, and endless opportunities to collaborate on exciting projects with diverse teammates from marine biologists to geophysicists to geotechnical engineers and more.The Opportunity:You will be part of our growing team, to work with a team of close-knit, like-minded, occupational hygienist, hazardous materials professionals, safety professionals, and technologists. Using your skills as an occupational hygiene technician to complete on-site assessments and monitoring. As a consultant, you will be providing occupational hygiene support to a variety of public and private clients. As the newest occupational hygiene technician, you will be working under the supervision of other experienced technicians, project managers and senior practitioner team members, with the opportunity to rapidly assume increasing autonomy and responsibility. WSP provides mentoring of all staff, all required safety and technical training courses, on the job shadowing, and training to maximize your learning opportunity. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future. #WeAre WSP A day in the life:You will have the opportunity to grow your career as a professional technician by: Applying your technical knowledge of methods, regulations, equipment, tools, systems, controls, and procedures. Make routine and non-routine decisions with guidance and with latitude of your supervising Project Manager. Work on a wide variety of assignments, scope of work and complexity. Providing project technical support and services, including:o Preparing and calibrating sampling equipment for field use,o Identifying site issues or project concerns and recommending corrective actions Providing occupational hygiene services, including:o Conducting site assessments for asbestos, mold, lead, PCB's, etc.o Sample collection in the field, data interpretation, and preparation of reports.o Interpreting and/or analyzing sample/data results in relation to legislative requirements and industry-accepted guidelines and criteria.o Supervising asbestos abatement activities. Conducting air quality assessments, including indoor air and occupational hygiene (i.e., IAQ, welding fume, noise) Basic client liaison to ensure health, safety, and occupational hygiene needs are addressed. Participate in the Health and Safety program. Participate in the Quality Control program. Engaging in technical training programs, Flexibility in meeting client schedules - evening, night, and weekend work may be required This position is approximately 90% field work, and 10% office-based with travel across Alberta and across Western and Northern Canada (for extended periods of time) with paid over-time as required. You'll be using your expertise to complete field surveys, write technical reports, collaborate with our many counterparts in all our different disciplines at WSP and provide expertise and client deliverables on projects. All other duties as required.What you'll bring to WSP ... Occupational Hygiene technician certificate, diploma from a chemical or environment programs or equivalent education such as technical, trade or college, and a Bachelor of Science (or similar) also acceptable. Eligible for membership in a professional organization is an asset but not a requirement. All levels of experience in Occupational Hygiene, hazardous material assessments (e.g., asbestos-related issues, lead, silica dust, etc.), is considered an asset. Experience working with a hazardous materials abatement contractor is an asset but not a requirement. Strong interpersonal, verbal, and written communication and you know your way around the MS Office suite of products. Must possess a valid Class 5 driver's license with no restrictions and access to a reliable vehicle, with appropriate registration and insurance. Requirement to wear personal protective equipment (i.e., respiratory protection, hard hat, high-visibility vests, fire retardant coveralls, safety boots, and safety glasses). A desire to broaden range of professional skills, adaptable, while managing a busy workload with proven problem-solving skills. Enthusiastic and versatile, willing to take on responsibility. Strong people and an ability to work in a team environment. You want to experience what it's like to work for the leading environmental consulting firm globally and be part of a growing and thriving team! WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

The Opportunity:You will be part of our growing team, to work with a team of close-knit, like-minded, occupational hygienist, hazardous materials professionals, safety professionals, and technologists. Using your skills as an occupational hygiene technician to complete on-site assessments and monitoring. As a consultant, you will be providing occupational hygiene support to a variety of public and private clients. As the newest occupational hygiene technician, you will be working under the supervision of other experienced technicians, project managers and senior practitioner team members, with the opportunity to rapidly assume increasing autonomy and responsibility. WSP provides mentoring of all staff, all required safety and technical training courses, on the job shadowing, and training to maximize your learning opportunity. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. What you can expect to do here: You will have the opportunity to grow your career as a professional technician by: Applying your technical knowledge of methods, regulations, equipment, tools, systems, controls, and procedures. Make routine and non-routine decisions with guidance and with latitude of your supervising Project Manager. Work on a wide variety of assignments, scope of work and complexity. Providing project technical support and services, including:o Preparing and calibrating sampling equipment for field use,o Identifying site issues or project concerns and recommending corrective actions Providing occupational hygiene services, including:o Conducting site assessments for asbestos, mold, lead, PCB's, etc.o Sample collection in the field, data interpretation, and preparation of reports.o Interpreting and/or analyzing sample/data results in relation to legislative requirements and industry-accepted guidelines and criteria.o Supervising asbestos abatement activities. Conducting air quality assessments, including indoor air and occupational hygiene (i.e., IAQ, welding fume, noise) Basic client liaison to ensure health, safety, and occupational hygiene needs are addressed. Participate in the Health and Safety program. Participate in the Quality Control program. Engaging in technical training programs, Flexibility in meeting client schedules - evening, night, and weekend work may be required This position is approximately 90% field work, and 10% office-based with travel across Alberta and across Western and Northern Canada (for extended periods of time) with paid over-time as required. You'll be using your expertise to complete field surveys, write technical reports, collaborate with our many counterparts in all our different disciplines at WSP and provide expertise and client deliverables on projects. All other duties as required. What you'll bring to WSP: Occupational Hygiene technician certificate, diploma from a chemical or environment programs or equivalent education such as technical, trade or college, and a Bachelor of Science (or similar) also acceptable. Eligible for membership in a professional organization is an asset but not a requirement. All levels of experience in Occupational Hygiene, hazardous material assessments (e.g., asbestos-related issues, lead, silica dust, etc.), is considered an asset. Experience working with a hazardous materials abatement contractor is an asset but not a requirement. Strong interpersonal, verbal, and written communication and you know your way around the MS Office suite of products. Must possess a valid Class 5 driver's licence with no restrictions and access to a reliable vehicle, with appropriate registration and insurance. Requirement to wear personal protective equipment (i.e., respiratory protection, hard hat, high-visibility vests, fire retardant coveralls, safety boots, and safety glasses). A desire to broaden range of professional skills, adaptable, while managing a busy workload with proven problem-solving skills. Enthusiastic and versatile, willing to take on responsibility. Strong people and an ability to work in a team environment. You want to experience what it's like to work for the leading environmental consulting firm globally and be part of a growing and thriving team! WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

OpportunityDo you love flying, engineering and working as part of a team? A career in the Canadian Armed Forces (CAF) as an Avionics Systems Technician carries the responsibility of maintaining all electronic systems onboard CAF aircraft. OverviewAs part of the Aircraft Maintenance Team, the Avionics Systems Technician is responsible for first-line servicing operations in launching and recovering all types of aircraft. The primary responsibilities are:Carrying out performance tests, and preventive/corrective maintenance and calibration of the following systems and their associated components:Aircraft communicationIntercomSearch radarFire control radarAcoustic sensingInfra-red radarElectronic warfareNavigationCompassFlight control systemsAutomatic flight control systemsElectrical wiring interconnection systemSetting up and operating test equipment to maintain the above systemsOperating and maintaining computer-controlled automatic test stationsServing as an instructor in field technical training units, training squadrons or basic training unitsPreparing and maintaining aircraft forms and statistical dataOperating aircraft support equipmentPerforming first-line servicing tasks such as marshalling, parking, towing, starting, refuelling, cleaning and de-icing To be eligible to apply to the CAF, you must:Be a Canadian citizen or permanent resident living in CanadaBe at least 18 years old (17 years old with parental consent), except:For the paid education programs you may be 16 years old (with parental consent)For the Primary Reserve you may be 16 years old (with parental consent) and must be enrolled as a full-time studentHave completed at least Grade 10 or Secondaire IV in Quebec (some jobs need higher levels of education) Paid Education OptionsNon-commissioned Member Subsidized Training and Education ProgramBecause this position requires specialty training, the CAF will pay successful recruits to attend the diploma program at an approved Canadian college. Non-commissioned Member Subsidized Training and Education Program students attend Basic Training and on-the-job training during the summer months. They receive full-time salaries, including medical and dental care, along with full pay in exchange for working with the CAF for a period of time. If you choose to apply to this program, you must apply both to the CAF and the appropriate college. Work EnvironmentAvionics Systems Technicians are employed primarily at air bases in aircraft maintenance organizations, in maintenance hangers, in airborne aircraft, in lab environments and on the flight line. Technicians will sometimes be required to work shifts and periods of overtime and can work in CAF wings and bases within Canada, the Arctic, and locations around the world in response to NATO and UN commitments. Basic Military QualificationThe first stage of training is the Basic Military Qualification course, or Basic Training, held at the Canadian Forces Leadership and Recruit School in Saint-Jean-sur-Richelieu, Québec, or through various training establishments across Canada from Esquimalt, British Columbia, to Halifax, Nova Scotia. This training provides the basic core skills and knowledge common to all trades. One main goal of this course is to ensure all recruits maintain the CAF physical fitness standard; as a result, the training is physically demanding but achievable. Avionics Systems Technicians TrainingAvionics Systems Technicians attend training at the Canadian Forces School of Aerospace Technology and Engineering (CFSATE) in Borden, Ontario, where they complete Common Core: eight weeks of common mechanical and aircraft servicing training. After some time at a squadron, they will return to CFSATE and take their Trade Training over 36 weeks, which includes:Solid-State DevicesDigital LogicAircraft WiringMagnetron, Klystron, Travelling Wave Tubes and Microwave TheoryComputer Techniques and ArchitectureInspection and repair of:Avionics (AVS) and Combined Avionic (AVS) / Aviation (AVN) Multi-Purpose Display SystemsPitot-Static SystemsFlight InstrumentsCompassesAircraft Flight Recorder and LocatorAir Data ComputerAutomatic Flight ControlElectronic Warfare SystemsNavigation SystemsRadar SystemsCommunication SystemsAircraft Data Processing Available Specialty TrainingAvionics Systems Technicians may be offered the opportunity to develop specialized skills through formal courses and on-the-job training for topics like:Instructional TechniquesCalibration TechnicianComputerized Fault Diagnosis and AnalysisHigh-Reliability SolderingAircraft Specific Type CoursesAdvanced Aircraft Maintenance CourseInstructional TechniqueLife Cycle Materiel ManagementAircraft Fluid HandlingCorrosion Identification and ControlTechnical WritingTechnical Inspection and Quality AssuranceFlight Safety Investigators Course Available Advanced TrainingAs they progress in their career, Avionics Systems Technicians who demonstrate the required ability and potential may be offered advanced training. Available courses include:Technical AdministrationLeadership and Management Courses Required Education The minimum required education to apply for this position is the completion of the provincial requirements for Grade 10 or Secondaire IV in Quebec, including: Grade 10 Applied Math (Mathématiques 416 or Cultural, Social and Technical 4)Foreign education may be accepted. Direct Entry Officer PlanIdeal candidates will already have a diploma or Red Seal for a related civilian trade. If you already have a university or college diploma, the CAF will decide if your academic program matches the criteria for this job and may optimize your progression following Basic Training. Basic Training is required before being assigned. Please note that, if successful in the application process, you will be entering service in either the Regular Force (full-time employment) or Primary Reserve Force (part-time employment) of the Canadian Armed Forces as a military member.• Regular Force: Upon completion of all required training, you will be assigned to your first base. While there is some flexibility with regards to postings (relocations), accommodations can’t always be made, and therefore, you can likely expect to move at some point in your career.• Primary Reserve Force: You will be joining the Primary Reserve Force through a specific Reserve unit. Outside of training, your chosen Reserve unit will be your workplace on a part time basis, and you will not be obligated to relocate to a different base. As part of the Primary Reserve Force, you typically work one night per week and some weekends with possibilities of full-time employment.To learn more about the various ways to join the Canadian Armed Forces, visit: https://forces.ca/en/how-to-join/#wjJoin the CAFTo learn more about becoming an Avionics Systems Technician, visit www.forces.ca, talk to a recruiter at a centre near you or call 1-800-856-8488.Explore over 100 different career opportunities at www.forces.ca/en/careers.

Seeking product development associate to help strategically transform onboarding platform and tools through a data driven approach.As a team member on the Securities Services Onboarding Product Development team you will an integral part of developing and delivering the vision and strategic roadmap for the On-boarding Transformation.Development of data driven tools and processes for simplification, standardization and optimization across People, Products, Process and Systems in support of on-boarding for the breadth of the Securities Services products is key focus area for the group. As a product development associate you will spend you day-to-day leading the delivery of projects aligned to the end-to-end onboarding for Securities Services products & services strategic roadmap. As a product development onboarding associate, you will work closely on implementing data strategy with Client Onboarding teams, Middle Office teams, Product Development, Data Architects, and various Technology teams to execute and ensure delivery of projects according to agreed timelines and budget. The candidate must demonstrate business leadership and technical skills to learn/understand the technology infrastructure. This role will identify opportunities to improve efficiency and will communicate clearly at all levels, engaging with senior stakeholders for strategic direction. Job Responsibilities: Define complex business data requirements in a simplified manner Help develop strategic vision and solutions for end-to-end onboarding platforms in collaboration with firm wide teams, and Securities Services teams with a sharp focus on business benefits, client service, and controls Owning end to end of the product & process, and the ability to interpret how alternative courses of action impact downstream processes and groups. Interact with all levels of management and operations to review, understand, document, and communicate objectives, business/program needs, risks, constraints and issues. Document traceability of requirements to business objectives - ensure that all requirements are all in support of the business case. Prepare business requirements, review functional requirements, monitor system development/ implementation, User Acceptance testing, production deployment and roll-out, in alignment with business priorities, ensuring product is delivered on time and on budget. Supporting operations team in defining operational processes to support the product. Identifying and manage risks/issues; create solutions to address limitations while minimizing time to market and minimizing control/operational risk. Required qualifications, capabilities and skills : Experience within a financial services product development or onboarding-focused operations or technology role with a strong focus on business analysis and change management. Adept at stakeholder management and demonstrated ability to engage with diverse set of stakeholders. Energetic self-starter that takes initiative and has demonstrated effectiveness working independently and in multi-disciplinary team with the ability to communicate clearly and confidently and influence senior stakeholders. Problem solving skills - demonstrated ability to structure and scope complex problems, apply a range of analytical tools, gain and synthesize insights and develop solutions aligned with strategic goals with a risk and controls mindset Strong data analytics - advanced ability to analyze and interpret data, identify themes, strengths and opportunities and rationalize data to deliver meaningful and commercial metrics for all projects. Strong MS Office skills - Excel, Share Point, Access, Word, Visio and PowerPoint. Strong time management skills, with an ability to multitask and work under pressure and engage with colleagues across regions and time zones. Preferred qualifications, capabilities and skills: Prior experience in client-facing onboarding or product development role within Custody and Fund Services is highly preferred. Prior experience in Securities Services business areas will be highly preferred. About usJPMorgan Chase & Co., one of the oldest financial institutions, offers innovative financial solutions to millions of consumers, small businesses and many of the world's most prominent corporate, institutional and government clients under the J.P. Morgan and Chase brands. Our history spans over 200 years and today we are a leader in investment banking, consumer and small business banking, commercial banking, financial transaction processing and asset management.We recognize that our people are our strength and the diverse talents they bring to our global workforce are directly linked to our success. We are an equal opportunity employer and place a high value on diversity and inclusion at our company. We do not discriminate on the basis of any protected attribute, including race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, marital or veteran status, pregnancy or disability, or any other basis protected under applicable law. We also make reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as mental health or physical disability needs. Visit our FAQs for more information about requesting an accommodation.About the TeamThe Corporate & Investment Bank is a global leader across investment banking, wholesale payments, markets and securities services. The world's most important corporations, governments and institutions entrust us with their business in more than 100 countries. We provide strategic advice, raise capital, manage risk and extend liquidity in markets around the world.J.P. Morgan delivers investor solutions that help clients protect their portfolios, optimize their efficiency and maximize opportunities in diverse global markets. Teams support clients across a global custody network spanning 100 markets, with custody and asset servicing, fund accounting and administration, alternative investment services, integrated analytics, agency lending, collateral management and depositary receipt solutions. Clients include asset and fund managers, asset owners, banks and broker-dealers, hedge funds and alternative investors, and insurance companies.Salary: . Date posted: 04/03/2024 10:24 PM

Make this role your own as our new Mechanic/Technician!Enjoy a highly competitive wage of up to $55/hr (or work on a contractual basis), plus a great host of benefits!Join a friendly and supportive team that is committed to professional development!About Tomahawk Industries Ltd.Tomahawk Industries Ltd. has been servicing Edmonton's air conditioning and fire suppression needs for over 20 years. With clients in a wide variety of industries, including agriculture, oil & gas, construction, trucking, logging, and mining, our goal is to exceed the expectations of our clients while operating as a safety-wise service company.All of our highly skilled employees are trained to comply with all safety, trade, and industry requirements. Our tools and equipment are industry-leading, and we have licensed mechanics and parts personnel to provide quality parts and service to our customers. Our trucks come fully equipped to handle any job and carry parts inventory to provide little-to-no downtime. With heated and air-conditioned walk-in service bodies, our techs are out of the elements reducing fatigue and increasing safety, saving our customers time and money. For more information about us, please visit our website, tomahawkind.ca.About the OpportunityTomahawk Industries Ltd. is currently seeking Mechanics/Technicians, Automotive HVAC & Fire Suppression based in Hinton, Alberta, with a future opportunity in Edmonton, AB and Calgary, AB.This role is perfectly suited to a hard-working mechanic and automotive technician who is looking for the autonomy and freedom to operate a fully-equipped service truck. This isn't just another job, it's a rewarding career opportunity for someone capable of managing a field service truck - but with the full support of an established company. In this role, you will be responsible for carrying out skilled work, including: Installing, inspecting, repairing, and maintaining A/C and fire suppressionDiagnosing electrical and mechanical troubles Safety assessments, invoicing & parts managementKeeping detailed log book for tasksMaintaining parts inventory in truckEnsuring all safety tickets are up-to-dateAbout YouTo qualify as a Mechanic/Technician, you must have experience in a similar role, as well as a Canadian Driver's License.You must also have strong mechanical knowledge and experience handling tools for repair, maintenance, and troubleshooting in any of the following:Commercial HVACSmall enginesHeavy equipmentMining equipmentFire SuppressionPractical automotive HVAC (asset)As a Mechanic/Technician, candidates possessing an auto mechanic, HVAC and/or A/C, and fire suppression journeyperson tickets are preferred, but not required. Whether you're an experienced Automotive/Heavy Duty Mechanic or HVAC Technician, we will provide all the relevant training needed to see you succeed in this role.After all the relevant training, successful candidates must also have excellent mechanical knowledge and the ability to complete all aspects of repair. Initiative and diligence will serve you well in this role, as well as a well-spoken communication style and superior customer service skills. Self-motivation and self-discipline are both essential due to the autonomous nature of this role. About the BenefitsFor Technicians and Apprentices, the hourly wage range up to $55/hour (negotiated based on skills and experience). In addition, you will receive a great range of benefits, including: Comprehensive benefits package Regular trainingBonuses RRSP matchingOptions for overtimeAll tools, equipment, and safety gear suppliedThis is a unique opportunity to join the team of a thriving and growing company, at an exciting time. If you enjoy being part of a working environment that promotes personal and professional growth in an atmosphere of trust, respect, and collaboration, apply now!

Change the future with us. We are looking for dedicated and talented people who tackle ever-changing challenges, customer needs, and questions from colleagues with clever concepts and creativity. We embrace change and work with curious minds re-inventing the future of work. Join us and let us focus together on what's truly important: making lives better with new ideas and the latest technology around the world.Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused - check out our communities! Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2024 and Greater Toronto's Top Employers 2022.What will you do?As Client Service Manager - Building Automation, you will foster relationships with assigned accounts in order to achieve agreed Order Intake budgets and maintain excellent customer relations. Continually review customer needs/demands and to advise on and optimize the activities of Service Technicians accordingly on all assigned service accounts i.e. maintenance visits, repairs, training demonstrations etc. Advise Service Supervisor and Dispatcher on service visits and handle all call-back problems Manage the Contract Renewal process for assigned accounts in conjunction with the Service Manager; Review and ensure contract costs are accurate to ensure repeat year on year profitable renewal Renewal costs to be sent to customer and agreed upon at least one month prior to end of contract year Be responsible for all aspects of small service work requirements from proposal stage to final close-out and invoice Generate customized competitive proposals for small system modifications repairs based on exact customer requirements Liaison with other contractors/sub-contractors where necessary to ensure site operations are fully co-ordinated; Negotiate the most cost effective solution for sub-contract suppliers and all other suppliers in-line with purchasing policies and procedures Collaborate with the Service Small Work Project Manager and handover some small work projects Liaise with Service Project Sales to share service leads and support the quotation process and maximize opportunitiesThis role will cover Calgary for the most part, with some projects in Edmonton & Vancouver. What will you need to succeed? 4 years in college/university in Mechanical and electrical engineering and/or HVAC knowledge or other strong field experience or an equivalent combination of education and related practical Building Automation Systems (BAS) experience Strong customer focus - able to sell small work manage service maintenance performance for outstanding customer satisfaction Proven organizational skills - able to plan effectively and prioritise workloads including the ability to multi-task and delegate effectively Self-motivated and calm under pressure; Good communication skills - verbal and written IT literate Commercially and technically aware Valid Driver's Licence in good standing is essential Asset: Building Automation Systems experience required; Fire and/or Security knowledge beneficialAbout us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/04/2024 02:10 PM

What's in it for you? Join an award-winning culture. We have been recognized for being a Great Place to Work, in addition to being selected as a FORTUNE Global 500 Company, Best Workplaces Retail & Hospitality, and FORTUNE World's Most Admired Companies. The opportunities with us are endless. As the world's largest food and support services company, we offer an extensive range of learning and career opportunities for all our associates. Health & Safety. The health and safety of our associates, clients and guests has always been our top priority. We have the right processes in place to ensure our teams have the support they need to stay safe, while helping to keep our guests safe. Health Benefits. For our eligible associates, we offer comprehensive health, vision, and dental care coverage. A Focus on Mental Health and Wellness. just now is our Mental Health and Well-Being initiative that was created to share credible resources with our associates and the communities we serve on a variety of topics, including mental, physical, spiritual, and financial wellbeing. Visit our Stronger Together Compass website at www.strongertogethercompass.com . We also have an Employment Assistance Program which provides our associates with access to 24/7 support, resources, and information. We are as diverse as our guests. We believe diverse and inclusive environments support innovation and collaboration, and benefit our associates, clients, and customers. We are committed to Listen, Learn, and Act and our Diversity Inclusion Action Councils (DIAC) are associate led groups that seek to foster inclusion through cultural awareness, engagement and appreciation of diversity. We are Stronger, Together! Working Title: Building Maintenance/Janitorial Worker, Remote CampEmployment Status: Full-TimeStarting Hourly Rate: 23.00 Benefits: Available after probationRequirements: Remote Camp, Fly In/Out Maintenance experience required Position includes custodian janitorial duties such as cleaning washrooms, lunch rooms and outside buildings on the mine site, etc. Must be physically fit Strong English comprehension Valid drivers license Pass a drug and alcohol test Address: South of Yukon boarder, Dease Lake BC Y0A 1C0New Hire Schedule: 10-12hr, Rotation: 14 Days On/ 14 Days OffStart Date: As soon as possibleYou might not know our name, but you know where we are. That's because Compass Group Canada is part of a global foodservice and support services company that's the 6th largest employer in the world, with 625,000 employees.You'll find us in schools, colleges, hospitals, office buildings, senior living communities, tourist attractions, sports venues, remote camps and military installations and more. We're in all major cities, at remote work sites and everywhere in between - doing business in Canada and 50+ other countries where you can learn and grow. Join us now and point your career forward!Imagine working in a place where thousands of people rely on your team to bring out the best in their day. Join us and know you can make it happen by creating a home away from home for our clients. You can make every day more enjoyable simply by serving a nutritious meal, or ensuring a safe living environment, or creating recreational programs for their down time. No matter what role you play with us, it will be an important one. Why work with ESS Support Services? We are a member of Compass Group Canada, the leading foodservice and support services company. We work with clients in the oil and gas, mining, construction, coastal logging, military and defense sectors. Coverage is as diverse as offshore oil rigs in the Gulf of Mexico, to coastal logging camps in B.C., to construction camps in the Alberta Oil Sands. Facilities are located within drill camps, mining camps, construction camps, pipeline camps, oil and gas installations and correctional facilities.Job SummaryHow you will make an impact:You will be responsible for assisting with day-to-day upkeep, maintenance, and smooth operation of the facility.As a Maintenance Technician, you will: Perform regular maintenance on the facility including changing light bulbs, carpentry, painting, minor drywall repair, minor plumbing, and tile repair Repairing Interior walls, installing drywall for repair or replacement Inspect the facility and other structures to detect malfunctions, furniture maintenance and conduct repairs accordingly Ad-Hoc duties such as Window and door repairs, mounting curtain poles, track, and fixture shelves Perform other work-related duties as assigned About you: Possess excellent communication skills in English both oral and written Valid Driver's license and a good driving record Physical ability to carry out the duties of this position Comfortable with heavy lifting and extensive walking around the facility Ability to operate related equipment such as manual or electric tools Ability to work independently as well as get along with others Should be highly detail oriented as well as ability to multitask Must be aware and or trained on the safe use of equipment, site safety practices, fire prevention and work regulations Compass Group Canada is committed to nurturing a diverse workforce representative of the communities within which we operate. We encourage and are pleased to consider all qualified candidates, without regard to race, colour, citizenship, religion, sex, marital / family status, sexual orientation, gender identity, aboriginal status, age, disability or persons who may require an accommodation, to apply.For accommodation requests during the hiring process, please contact [email protected] for further information.Salary: . Date posted: 04/01/2024 04:11 PM

NEW! Experienced Water Restoration Technician - Full TimeCompetitive wages ($26 - $32/hr. depending on experience) - Excellent Benefits - Centrally located in BurnabyWe also offer paid training – We will provide flood restoration certification courses/training to successful candidates. A career with our company will allow you to learn a specialized trade while helping people in the community who have experienced an emergency. We offer you an opportunity to make good money while providing extraordinary care - serving people in their time of need.Established in 1985, we have become a Canada-wide restoration leader with offices from coast to coast. We have set high standards for restoration services in the Lower Mainland and we are proud to say we consistently exceed the expectations of property owners and insurance companies alike! Generous Benefit package includes:MedicalDentalVisionDisabilityChiropractic, Massage, & Acupuncture.Plus:Company Vehicle/Gas Card/Mobile PhonePaid VacationsPaid Industry Training and Certifications (IICRC Courses)REAL Opportunities to AdvanceCasual Work Culture What you will be doing: Duties include: performing all aspects of cleaning, emergency mitigation and structural drying services, customer service, paperwork, health & safety, etc.Work with Project Managers in assessing and processing flood and fire damageUse moisture testing instruments, assist in writing the job scope, layout the drying protocol and moisture mapping planOrganize and arrange appropriate equipment and materialsCommunicate, direct and delegate tasks to labourersRelated paperworkEnsure site protection is installed properlyAccurately calculate, necessary equipment required for each jobOrganize and run jobsPractice on the job safety and encourage safety among the teamOrder, pick up and return equipment from warehouse or outside facilitiesTake asbestos samples and deliver specimens to the labProvide onsite training for technicians and labourersother duties as may be required Requirements:2 or more years’ Water Damage ExperienceIICRC CertificationExcellent customer service skillsStrong written/verbal communication skillsValid BC Driver's LicenseAbility to pass a criminal background checkAvailable for on call work (overtime rates apply) Come work with the best, we look forward to meeting you! Easy Apply Now!

Technology driven, problem solvers Customers around the world trust in our products. Our service technicians and engineers significantly contribute to that. You are the first on the scene to solve any technical problem. You are a trusted adviser, team player, and make things possible. "Unsolvable" is a foreign term, and you go the distance. Your focus on the customers' needs makes you an invaluable partner. When you join our team, the possibilities are endless.Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2023, Canada's Top Employers for Young People 2023 and Greater Toronto's Top Employers 2023.What will you do? Conduct inspections of installed systems and complete inspection reports. Complete preventative maintenance for sprinkler systems. Repair, maintain and update sprinkler systems as required. Perform field repairs when required. Perform small retrofit. Location / territory: primary support for Ottawa ON, secondary support for Kingston ONWhat will you need to succeed? Licensed Fitter or working toward Licensed Fitter; enrolled in Apprentice program. 5 or more years of service experience. Ability to operate required equipment in a safe and responsible manner. Valid Driver's license in good standing. Flexibility to travel primarily throughout the Ottawa area, and Kingston area as needed, to client sites as required. Ability to work after hours and on the week-ends. Collaborative approach in a team environment. Strong customer relationship skills Strong English communication skills, both written and verbal. About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/05/2024 08:15 PM

Status: Regular Full Time Working Conditions: On-Site     Education Level: Highschool and and 2 years of college in Electrical Techician/TechnologistLocation: Bowmanville, ONNumber of Position(s): 2  Shifts(s): DaysTravel: NoneDeadline to Apply: February 29, 2024Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of Sr. Draftsperson – Electrical.This position is responsible to prepare all types of Electrical drawings and sketches for equipment and electrical systems for the purpose of design, procurement of materials, fabrication and installation in a nuclear generating station utilizing Computer- Aided Drafting system (CADS) technology. More specifically, this involves the preparation or revision of detail and study drawings for fabrication and construction, providing all pertinent information for electrical wiring diagrams, cable block diagrams, and other associated electrical drawings. Prepare bills of material to accompany given drawings. Enter data into On-line Wiring database. Participate in plant walkdowns to ensure configuration management is supported.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES Accountable for health, safety and well being of self and others in accordance with technical/operating procedures and standards, and includes the development of technical/operating solutions to problems.Accountable for self-checking in order to prevent and catch errors.As directed, obtain reference data, from files, associates or other groups. Review the preparation or production assignment to understand instructions and to determine a logical work approach. Study the given assignment to understand the scope and limits of detail drawing required. Perform calculations as necessary, using the principles of algebra, geometry and trigonometry or special formulae, which are supplied, with instructions of use. Refer to supervisor for guidance when conflicting or missing detail is encountered or production problems cannot be resolved. Contact other groups as directed to clarify problems or obtain missing information. Proceed with the preparation of drawings and resolve technical problems encountered.Participate in plant walk downs to ensure configuration management is supported.Prepare all types of electrical drawings using CADS technology: a) To portray modifications to established design schemes of apparatus, equipment and materials as to location, size, clearances, support quantity. b) To portray assembly for high and low voltage switching structures, grounding, lightning protection, allocation and routing of power/control cables and duct systems, prepare cable pans and conduit drawings), building services (power supplies, lighting, receptacle, HVAC (heating, ventilation and air conditioning) switchboards (control metering and relaying) and provision for such miscellaneous systems as telephone, public address radio communication, LAN cabling, security alarms and fire detection and control based on established design drawings and general requirement.Prepare Bills of Material, material lists, listing such features as material description, make and catalogue number, code markings and quantity for each different type of material shown on the drawings. Perform any necessary calculations. Make use of catalogues or the given data to compile the required detail.Provide verification checklists for safety related systems. Requires an understanding of channelization discrepancies (cable separation between channels, groups, and voltages. Ensure new cables have not been routed in overloaded cable trays. Status on line wiring to current built installations if requested.Show others, internal and external personnel, how the CADS work stations operate. Demonstrate the use of equipment, operating techniques, etc., to interested parties. EDUCATIONHighschool diploma2-years of postsecondary education in Electrical Technician/TechnologistQUALIFICATIONSUp to 10 years drafting experience;Proficiency using AutoCAD interface and Microsoft Office such as Wrok, Excel and Power PointExperience with Online – Wiring Database preferred;Strong written and verbal communication, collaboration and interpersonal skills for the purpose of gathering and relaying information, resolving issues of concern, etc.;Proven ability to work well with others;Good organizational and leadership skills, and to be a self-starter who can work both independently and in a team environment;Results and detail oriented individual;High integrity, upholding company values including Health and Safety, and protection of the environmentThe successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enough Inclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., February 29, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted..

Technology driven, problem solvers Customers around the world trust in our products. Our service technicians and engineers significantly contribute to that. You are the first on the scene to solve any technical problem. You are a trusted adviser, team player, and make things possible. "Unsolvable" is a foreign term, and you go the distance. Your focus on the customers' needs makes you an invaluable partner. When you join our team, the possibilities are endless. Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2022 and Greater Toronto's Top Employers 2022. What will you do? Siemens Canada in Montreal is currently seeking a Fire Alarm Technician to join our team in Service. In this role, you will be responsible for the maintenance and repair of fire alarm systems for our industrial, institutional, commercial, and healthcare clients. You will also have the opportunity to work in unique work environments such as mines, hospitals, and well-known buildings in Montreal. Responsibilities: Perform preventive maintenance and repairs on Siemens Desigo, XLS/MXL fire alarm systems, as well as any type of fire alarm product such as Vesda, Mircom, Simplex, Edward; Test fire alarm systems in accordance with various codes and standards; Diagnose technical problems and repair/correct them accordingly; Provide exceptional customer service by communicating in a professional and courteous manner; Participate in a rotating schedule every 15 weeks or 3 times per year; Ensure compliance with fire alarm standards and regulations, ULC-536-04 standards; Ensure compliance with ULC 537-04 and ULC 537-19 standards; Benefits of the role: Flexible scheduling to accommodate client needs (generally 8 AM to 4 PM); Possible overtime hours; Vehicle provided which can also be used for personal needs; Opportunity to work in unique work environments such as mines, hospitals, and well-known buildings in Montreal; Reimbursement of training fees with the Canadian Fire Alarm Association (ACAI/CFAA). Access to our Benefits programs as of Day 1 If you are a motivated individual focused on customer service and would like to join a leading company in the field of fire alarms, do not hesitate to submit your resume! What will you need to succeed? Have one of the following diplomas: DEP, AEC or DEC degree in electronics, Installation and maintenance of security systems, elecromechanic, Fire alarm experience Autonomy, resourcefulness and organizational skills Ability to occasionally work outside normal business hours and outside of the greater area of Montreal Valid driver's license Excellent knowledge of French, spoken and written Good knowledge of English spoken and written, a strong asset to interact with customers and colleagues across Canada; About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $$385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/08/2024 02:37 PM