Overview of salaries statistics of the profession "BIM Modeling Manager in Canada"

Building Energy Simulation Specialist:  Harvey 2408 Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting, and is willing to take on responsibility as his/her experience progresses.Objective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.                                        The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:   Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST / CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key players Expected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits packagePerformance bonus is available                                                                                                                                                

Building Energy Simulation Specialist:  Harvey 2409Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting and is willing to take on responsibility as his/her experience progresses.Position: Building Energy Simulation SpecialistObjective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:  The Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST/CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key playersExpected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits package availablePerformance bonus

Job Summary: We are seeking a VCS Coordinator to join our Ledcor team in this remote/work from home role with office later in Vancouver, BC or Toronto, ON. The VCS Coordinator, under the direction and guidance of the VCS Manager provides technical and/or management support and assists operations staff to ensure projects are completed on time and within budget. Check our VCS online presentation https://prezi.com/view/sSTB6qVHB6l46wOycBmc/Join the Virtual Construction Services team and experience the opportunity to use virtual reality and gaming technology to help solve problems.Essential Responsibilities: Help create virtual 3D models from plans and specificationsAssist on-site BIM related project coordination, including model coordination with trade contractorsTroubleshoot BIM related issues on site, seeking assistance from branch BIM staff as requiredHelp generate 4D simulations and site logistic modelsSupport quantity take-offs taken from BIM modelsAssist project staff in understanding the prime and trade contract documents as they relate to BIM services, responsibilities and deliveryCommunicate updated 3D site logistics plan and 4D modeling animation to project stakeholdersHelp update BIM enabled "as-built" project schedule using BIM elements to demonstrate current statusAssists and performs clash detection and develops solutions with project team Maintain BIM related document management systems on projectsCoordinate 3D laser scans/point cloud models Implement VR / AR models for coordination and validation as requiredMay perform other duties as requiredQualifications: Working towards completion of a degree in civil engineering, construction management or architectureSome relevant experience working with BIM related software; Autodesk Revit, Navisworks, 3DS Max, Revizto, Enscape, Fuzor and SynchroStrong computer skills including Microsoft Office suiteStrong communication, planning and organizational skillsExcellent work ethic, demanding the highest standards of performance from self and othersTeam oriented approach to business with a willingness to uphold company values and interest in continuous learning new BIM toolsTravel: Role is remote/work from home with office later in Vancouver, BC or Toronto, ON with some travelAdditional Information: Company DescriptionLedcor Building offers full-service construction for commercial, residential, institutional, and light industrial projects, along with expertise in green building. Our depth of knowledge and expertise come from building hundreds of projects - of all sizes - across North America each year.But when you work for Ledcor, your experience will go far beyond the project. Do you want a career that means more? Join our True Blue team now!Employment EquityAt Ledcor we believe diversity, equity, and inclusion should be part of everything we do. We are proud to be an equal-opportunity employer. All qualified individuals, regardless of race, color, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or any other identifying characteristic are encouraged to apply.Our True Blue team consists of individuals from all backgrounds who contribute diverse perspectives and experiences to Ledcor. We are committed to continuing to build on our culture of empowerment, inclusion and belonging. Date PostedJul 22, 2021 1067 West Cordova Street, Vancouver, BC, Canada

TORONTO | CALGARY | OTTAWA WSP is currently seeking a BIM Modeller to join our Ports, Marine and Coastal Group, Reporting to the Operations Manager this position will be responsible for working with a multi-disciplinary team to take innovative design solutions from proposals through to construction, for clients in a wide variety of civil/structural infrastructure projects in the areas of ports and harbors; coastal, environmental, and water resources; urban waterfronts and marinas; transportation highways, bridges, and rail.A day in the life: Development and implementation of Autodesk's Revit software as an office wide standard while coordinating and mentoring Revit based teams during the course of multiple projects. Assist in the research, development, documentation, communication and administration of BIM standards in coordination with other global WSP Offices. Promote practices to improve production efficiency and effectiveness. Undertake short term assignment in WSP Netherlands to get oriented with WSP's Global BIM procedures and processes. Coordinate processes that facilitate the interoperability of CAD, graphics and modeling tools Draft detailed drawings of structures and installations such as cargo terminals, marinas, wharfs, bulkhead walls, and coastal structures (beaches, revetments, breakwaters, and jetties) Create detailing/design of structural connections and components with concrete reinforcing and steel construction focus extract quantities from the 3D models, drawings and specifications for earthworks, dredging, reclamation etc. to compile a bill of quantities and assist in preparation of tender documents. importing point clouds for generating as-built 3D models of existing structures which can then be used to model current grade elevations/profiles or the 3D seabed .What you'll bring to WSP ... Post-Secondary education in a relevant field. Past experience implementing BIM in Engineering 5 to 10 years of experience, preferably in Ports, Maritime, Coastal, Civil and Infrastructure works Superior knowledge of Revit / BIM implementation for civil - infrastructure projects master of AutoCAD, AutoCAD Civil 3D, Revit, and Grasshopper/Rhino Passion for BIM technologies with ability to promote these technologies and practices to increase user effectiveness. Customer Service oriented with commitment to working within a team environment and wider organization. ability to use or develop advanced Dynamo scripts and Python coding Strong, self-motivated work ethic with ability to be effective and timely while providing consistent follow up. Organized and methodical with a resourceful capacity for resolving challenges. Sound knowledge in structural engineering with good knowledge of reinforcement bar detailing is an asset Other skill sets that will be of interest include but not limited to GIS, ArcGIS, Map3D, Infraworks related experience and knowledge of open-source file formats for data exchange. French speaking is an asset WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

VANCOUVERWSP is currently seeking a BIM Modeller to join our Ports, Marine and Coastal Group, Reporting to the Operations Manager this position will be responsible for working with a multi-disciplinary team to take innovative design solutions from proposals through to construction, for clients in a wide variety of civil/structural infrastructure projects in the areas of ports and harbors; coastal, environmental, and water resources; urban waterfronts and marinas; transportation highways, bridges, and rail.A day in the life: Development and implementation of Autodesk's Revit software as an office wide standard while coordinating and mentoring Revit based teams during the course of multiple projects. Assist in the research, development, documentation, communication and administration of BIM standards in coordination with other global WSP Offices. Promote practices to improve production efficiency and effectiveness. Undertake short term assignment in WSP Netherlands to get oriented with WSP's Global BIM procedures and processes. Coordinate processes that facilitate the interoperability of CAD, graphics and modeling tools Draft detailed drawings of structures and installations such as cargo terminals, marinas, wharfs, bulkhead walls, and coastal structures (beaches, revetments, breakwaters, and jetties) Create detailing/design of structural connections and components with concrete reinforcing and steel construction focus extract quantities from the 3D models, drawings and specifications for earthworks, dredging, reclamation etc. to compile a bill of quantities and assist in preparation of tender documents. importing point clouds for generating as-built 3D models of existing structures which can then be used to model current grade elevations/profiles or the 3D seabed .What you'll bring to WSP ... Post-Secondary education in a relevant field. Past experience implementing BIM in Engineering 5 to 10 years of experience, preferably in Ports, Maritime, Coastal, Civil and Infrastructure works Superior knowledge of Revit / BIM implementation for civil - infrastructure projects master of AutoCAD, AutoCAD Civil 3D, Revit, and Grasshopper/Rhino Passion for BIM technologies with ability to promote these technologies and practices to increase user effectiveness. Customer Service oriented with commitment to working within a team environment and wider organization. ability to use or develop advanced Dynamo scripts and Python coding Strong, self-motivated work ethic with ability to be effective and timely while providing consistent follow up. Organized and methodical with a resourceful capacity for resolving challenges. Sound knowledge in structural engineering with good knowledge of reinforcement bar detailing is an asset Other skill sets that will be of interest include but not limited to GIS, ArcGIS, Map3D, Infraworks related experience and knowledge of open-source file formats for data exchange. French speaking is an assetCompensationExpected Salary (all locations): $72,600 - $123,400WSP Canada is providing the compensation range that the company in good faith believes it will pay for this position based on the successful applicant's education, experience, knowledge, skills, abilities in addition to the specific geographic location. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

The opportunityWSP is seeking a CAD Technician to join our Municipal Engineering team in Whitehorse, YT. Reporting to the office manager this position will be responsible for applying Civil 3D knowledge on project work from conceptual design through to completion.Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. Our Hybrid Work Policy - a combination of in-person and remote working, enables us to purposefully think of how we work, who we need to work with, and where the work should be done. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSP #LI-HybridA day in the life: Utilizing AutoCAD Civil 3D knowledge in projects from concept to completion; Prepare engineering drawings to specified standards; Design assistance; Earthworks modeling; and Other duties as assigned/required.What you'll bring to WSP... Diploma in Civil Engineering Technology or Engineering Design and Drafting; 2+ years of experience in AutoCAD drafting and design; Knowledge in AutoCAD Civil 3D software is mandatory; Highly motivated, hardworking and enthusiastic team player; Strong interpersonal and communication skills and a flexible attitude are a must; and Capable of working independently. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Embark on a thrilling journey with WSP as we seek a dynamic Intermediate Electrical BIM Modeler for our GTA Buildings Mechanical and Electrical Transportation Group. Reporting directly to our BIM Manager, you will be the driving force behind the electrical and lighting design and BIM 3D modeling for groundbreaking transportation projects. In addition, you will also play a pivotal role in leading the GTA M&E team towards 100% BIM adoption and extensive use of design automation for project delivery as part of a major corporate initiative.WSP is committed to becoming the leading M&E firm in Canada and globally around the use of production through technology / design automation and we are looking for a dynamic individual to support this short to medium-term plan.Ideally you will bring 5+ years related experience with a high level of knowledge in BIM design in an Electrical and/or Lighting design office. Previous experience with design automation is considered a major asset. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Embark on a thrilling journey with WSP as we seek a dynamic Intermediate Mechanical BIM Modeler for our GTA Buildings Mechanical and Electrical Transportation Group. Reporting directly to our BIM Manager, you will be the driving force behind the mechanical design and BIM 3D modeling for groundbreaking transportation projects. In addition, you will also play a pivotal role in leading the GTA M&E team towards 100% BIM adoption and extensive use of design automation for project delivery as part of a major corporate initiative.WSP is committed to becoming the leading M&E firm in Canada and globally around the use of production through technology / design automation and we are looking for a dynamic individual to support this short to medium-term plan.Ideally you will bring 5+ years related experience with a high level of knowledge in BIM design in a Mechanical design office. Previous experience with design automation is considered a major asset. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Build Your Career at Aecon Aecon is proud to build some of the most impactful infrastructure projects of this generation. From the roads and transit systems that connect our communities, to the communication networks that link us from coast-to-coast, and the water infrastructure that supplies our businesses and homes. Our integral work includes constructing the pipelines that join provinces with the energy that fuels the nation, and the airports and ports that connect us all. Aecon is there, safely and sustainably building the future. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our employees. We are always searching the globe for exceptional candidates to join the Aecon family and be a part of our forward-thinking, innovative, best-in-class organization! What is the Opportunity? Aecon Civil is a market leader with a self-perform competitive advantage and core local strength in key markets. Were proud of our work helping to expand and improve Canadas infrastructure and transportation networks, and were ready to build the future of our country. This role will support the Sr. Manager of IDD to enable Integrated Digital Delivery outcomes to ensure the information is delivered to program and coordinated between engineering disciplines, organizations and packages. What You'll Do Here: Evaluate and assess site conditions prior to construction Develop phased site development 2-D and 3-D drawings for construction Coordinate design of utilities, civil, nuclear, industrial and UTS projects Creating and maintaining corridors/sections/profiles for rail and road design alignments Quantity take offs using cut/fill tracking, xml surface extractions Supporting the IDD Director/ IDD Manager or project BIM lead to ensure the correct activities are assigned to the consultant supply chains Information Managers Providing coordination reports of the interfaces between engineering disciplines / design and construction / temporary and permanent works design activities, through the IDD process Coordination and development of the design to Construction through IDD processes such as 5D/4D to ensure consideration and optimization of the opportunities for sustainability, digital engineering, buildability, carbon, logistics, industrialization designing for maintenance and health, safety and welfare during construction and in-use Run IDD tools training workshops to enable people to deliver their responsibilities in relation to Aecon IDD Strategy Coordinate with Project Managers and Construction Managers to develop a project specific process for utilizing or creating 3D information for estimating, logistics, planning, scheduling, coordination, field layout and/or facilitates management Coordinate with field superintendents and construction managers, design engineers, and others to meet constructability requirements Create project specific protocols regarding communication and data exchange, nomenclature, format, 3D workspace orientation to ensure interoperability as required Facilitate consultant and trades through multiple project phases with Digital logistic construction management process Assist in the creation of project specific contract language for tender packages for 3D submission process and 3D as-builts for facilities management Review, coordinate and manage the creation of Project Information Models Project deployment duties include; installing software, organizing, maintaining and setting up CAD exchange environments, basic training & support for project team, coordination assistance, file conversions and documenting process and solutions for reuse Champion 3D coordination on active job site, act as liaison with project team, consultants and subcontractors to facilitate process and maintain Master Project BIM database Identify opportunities and recommend solutions that will enhance or improve processes What You Bring to the Team High proficient use of AutoCAD Civil 3D Educational and Industry experience Experience with 3-D modeling 2+ years drafting experience with AutoCAD Civil 3D with a professional civil design Proficiency in BIM authoring tools such as REVIT, AutoCAD Civil 3D, Bentley Proficiency in 4D platforms such as Navisworks simulate and Synchro Knowledge of Common Data Environments such as ProjectWise, Procore, ACC, and Aconex Detailed understanding of corporate and industry practices, processes, standards etc. Working knowledge of EHS regulations Experience across all stages of a project lifecycle would be desirable Experience of working within construction project environments would be desirable Experience of large complex projects in infrastructure would be desirable Understanding design and construction phases and alignment with Digital Plans Project experience with implementation of BIM process On-site construction experience would be desirable Strong written, verbal communication and interpersonal skills Proven experience in priority setting, multitasking, and working with minimal direct supervision What Makes us Aecon Proud: Engaging and agile workplace culture, collaborative and inclusive teams Commitment to sustainability and to becoming a net-zero company by 2050 Investing in our people through a variety of learning and development programs such as Aecon University, BluePrint leadership program, and Project Management Academy Variety of wellness benefits, access to virtual health care, 100% employer-paid health and dental premiums, Employee Assistance Program, Best Doctors Program, and more. Tuition reimbursement opportunities Recognition and rewards through Aecon Accolades, Aecon Achievement Awards and more Employee Stock Options, Short Term Incentive Program, Retirement Savings and Pension Plan Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. If you require accommodation during any step of the application process, please click here.

Embark on a thrilling journey with WSP as we seek a dynamic Electrical BIM Modeler for our Vancouver Buildings Mechanical and Electrical Team. Reporting directly to our BIM Manager, you will be the driving force behind the electrical and lighting design and BIM 3D modeling for various projects in BC and beyond. In addition, you will also play a pivotal role in leading the Vancouver M&E team towards 100% BIM adoption and extensive use of design automation for project delivery as part of a major corporate initiative. WSP is committed to becoming the leading M&E firm in Canada and globally around the use of production through technology / design automation and we are looking for a dynamic individual to support this short to medium-term plan. Ideally you will bring 5+ years related experience with a high level of knowledge in BIM design in an Electrical and/or Lighting design office. Previous experience with design automation is considered a major asset. Responsibilities 3D modeling of Power Distribution, Circuiting, Grounding, Lightening Protection, Lighting, Fixture Selection, and Fire Alarm System (FAS); Assist designers with system design and modeling of Electrical Systems, and Lighting Design, equipment selection, and Lighting Fixtures; Prepare Electrical installation details; Work individually or part of the team to develop the drawings for submission; 3D modeling of Power Distribution, Circuiting, Grounding, Conduit and Duct Bank routing, interior and exterior Lighting, and Fire Alarm System; Assist with Electrical Designers and EIT's with system design; Assist with corporate BIM standards, policies and procedures; Assist with developing cutting edge tools to support BIM team in efficient workflows; Coordinate with WSP's offshore design team; Stay up-to-date with the latest trends related to BIM and design automation Attend Autodesk University (when necessary), representing WSP and joining your global colleagues to share best practices. Qualifications Superior knowledge of Revit, BIM360, AutoCAD, Navisworks, and other BIM Revit add-ins support tools Previous experience with supporting National or Regional BIM standards considered an asset; Previous experience with design automation and production through technology considered an asset; Passion for BIM technologies with ability to promote these technologies and practices to increase user effectiveness; Knowledge of Power Distribution, Circuiting, Lighting Design, equipment sizing, and Fire Alarm Systems considered an asset; MicroStation knowledge and familiarity with TTC Standards are considered an asset CompensationExpected Salary (all locations): $62,600 to 106,400WSP Canada is providing the compensation range that the company in good faith believes it will pay for this position based on the successful applicant's education, experience, knowledge, skills, abilities in addition to the specific geographic location. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Build Your Career at Aecon Aecon is proud to build some of the most impactful infrastructure projects of this generation. From the roads and transit systems that connect our communities, to the communication networks that link us from coast-to-coast, and the water infrastructure that supplies our businesses and homes. Our integral work includes constructing the pipelines that join provinces with the energy that fuels the nation, and the airports and ports that connect us all. Aecon is there, safely and sustainably building the future. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our employees. We are always searching the globe for exceptional candidates to join the Aecon family and be a part of our forward-thinking, innovative, best-in-class organization! What is the Opportunity? Aecon Civil is a market leader with a self-perform competitive advantage and core local strength in key markets. Were proud of our work helping to expand and improve Canadas infrastructure and transportation networks, and were ready to build the future of our country. This role will support the Sr. Manager of IDD to enable Integrated Digital Delivery outcomes to ensure the information is delivered to program and coordinated between engineering disciplines, organizations and packages. What You'll Do Here: Evaluate and assess site conditions prior to construction Develop phased site development 2-D and 3-D drawings for construction Coordinate design of utilities, civil, nuclear, industrial and UTS projects Creating and maintaining corridors/sections/profiles for rail and road design alignments Quantity take offs using cut/fill tracking, xml surface extractions Supporting the IDD Director/ IDD Manager or project BIM lead to ensure the correct activities are assigned to the consultant supply chains Information Managers Providing coordination reports of the interfaces between engineering disciplines / design and construction / temporary and permanent works design activities, through the IDD process Coordination and development of the design to Construction through IDD processes such as 5D/4D to ensure consideration and optimization of the opportunities for sustainability, digital engineering, buildability, carbon, logistics, industrialization designing for maintenance and health, safety and welfare during construction and in-use Run IDD tools training workshops to enable people to deliver their responsibilities in relation to Aecon IDD Strategy Coordinate with Project Managers and Construction Managers to develop a project specific process for utilizing or creating 3D information for estimating, logistics, planning, scheduling, coordination, field layout and/or facilitates management Coordinate with field superintendents and construction managers, design engineers, and others to meet constructability requirements Create project specific protocols regarding communication and data exchange, nomenclature, format, 3D workspace orientation to ensure interoperability as required Facilitate consultant and trades through multiple project phases with Digital logistic construction management process Assist in the creation of project specific contract language for tender packages for 3D submission process and 3D as-builts for facilities management Review, coordinate and manage the creation of Project Information Models Project deployment duties include; installing software, organizing, maintaining and setting up CAD exchange environments, basic training & support for project team, coordination assistance, file conversions and documenting process and solutions for reuse Champion 3D coordination on active job site, act as liaison with project team, consultants and subcontractors to facilitate process and maintain Master Project BIM database Identify opportunities and recommend solutions that will enhance or improve processes What You Bring to the Team: Must have a minimum of 3-5 years of experience Spanish and English, Bilingual proficiency is required for this role Working knowledge of geocoordinates and geo-location for projects coordination Proficient with Software: Civil 3d, which includes but is not limited to Creating and maintaining corridors/sections/profiles for rail and road design alignments, Xref, Quantity take-offs using cut/fill tracking, and XML surface extraction Working Knowledge of Revit, Power BI, Navisworks, Autodesk construction cloud, dynamo script, Assemble quantity takeoff, Fuzor and Synchro Pro Knowledge of ACC workflows, model coordination, GIS Tools and BIM standards Manage data output format to allow use by other software such as FMS, Aconex and required database interfacing Experience with 3-D modeling High level of knowledge for interpreting design and construction drawings Adequate Industry experience as applicable Proven experience in priority setting, multitasking, and working with minimal direct supervision Project experience with the implementation of BIM process effectively on the projects Multi-tasking, collaborative and effective team communicator skills What Makes us Aecon Proud: Engaging and agile workplace culture, collaborative and inclusive teams Commitment to sustainability and to becoming a net-zero company by 2050 Investing in our people through a variety of learning and development programs such as Aecon University, BluePrint leadership program, and Project Management Academy Variety of wellness benefits, access to virtual health care, 100% employer-paid health and dental premiums, Employee Assistance Program, Best Doctors Program, and more. Tuition reimbursement opportunities Recognition and rewards through Aecon Accolades, Aecon Achievement Awards and more Employee Stock Options, Short Term Incentive Program, Retirement Savings and Pension Plan Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. If you require accommodation during any step of the application process, please click here.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!When it comes to what you want in your career, if you can imagine it, you can do it at Parsons. Imagine a career working with intelligent, diverse people sharing a common quest. Imagine a workplace where you can be yourself. Where you can thrive. Where you can find your next, right now. We’ve got what you’re looking for.Job Description:Parsons is looking for an amazingly talented Lead Revit BIM Technologist to join our team! In this role you will get to Lead the structural BIM team , support the BIM Manager and our Project Delivery Teams to execute the day-to-day development, establishment and implementation of BIM in Parsons Canada offices.What You'll Be Doing:Lead the structural BIM team, support the BIM manager and Project Delivery Team(s) in day-to-day BIM implementation activities.Develop 3D dimensional models required for drawing preparation, clash reporting and presentation aligned with the project LOD requirements and modeling standards.Develop Structural 3D models in coordination with Architectural 3D models.Extract 3D models for clash analysis, schedule review and QTO’s reports.Ensure coordination of all Model interfaces with designers and engineers of other disciplines.Ensure all Models, drawings and deliverables are checked to comply with project and company quality standards and BIM requirements.Prepare the engineering drawings from the model that comprises of detailed arrangements, plans, sections and elevations.Develop and extract 2D geometry from the models for drawing production and internal reviews and coordination meetings.Ensure Project Information Models (PIM’s) are delivered in accordance with the agreed TIDP, MIDP and CDE protocol. Prepare BIM package submissions in accordance with project standards and requirementsConduct clash detection and visual walkthroughsPrepare models and reports for constructability analysisCoordinate work with the lead technical engineer, including taking responsibility for timely completion of deliverables.Hands on construction experience and/or work with existing transit projects is considered an asset.Coordinate with Junior and Intermediate technologists by providing guidance and mentorship.What Required Skills You'll Bring:Bachelor’s Degree or Diploma in Engineering or Architectural technology from an accredited technical institution.Minimum 10+ years Revit experience within depth working knowledge of current Revit versions; Proficient in CAD design 2D/3D (AutoCAD and Revit).Able to demonstrate (skill assessment) ability to set up new Revit project files for the team; Demonstrate strong problem-solving skills and multitasking ability; Produce Revit Families according to project requirements.Able to maintain standards and library of Revit families/objects; Able to run clash detection in Revit.Strong computer skills; Experience of producing working drawings in Revit.Expert knowledge of Revit including use of parametric, generation of Bill of Material, assemblies, sub-assemblies, creation of families, etc.Advanced Revit skills are essential including creation of a federated model using Revit Links, creating/working with Revit Worksets and professional using of shared coordinates.Proficient in a range of BIM Authoring, Scripting, Design Review, Coordination, Simulations and Collaboration Platforms:Essentials: (Revit, Dynamo, Navisworks, ACC, Civil3D, AutoCAD).Preferable: (ProjectWise, Synchro, Bluebeam Studio, Autodesk Inventor professional, Sketchup, 3D Max). Rail projects experience is an added advantageKnowledge of BIM codes and Standards (ISO19650, PAS1192-2, BS1192).Knowledge of General BIM Model requirements (i.e., LOD, Naming convention, parametric modeling, etc.)What Desired Skills You'll Bring:Excellent verbal and written communication skills.Possess Excellent Oral Communication Skills with an Ability to Form Effective Relationships with Project Delivery Team, Client, and Contractor under Time Pressure.Possess the ability to Develop Analytical Reports and Presentations.Minimum Clearance Required to Start:Not Applicable/NoneThis position is part of our Critical Infrastructure team.For more than 75 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in diverse, collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people’s quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers’ visions-and to help them see new possibilities.We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as health, vision, dental, employer paid provincial care premiums, Defined Contribution Pension Plan (DCPP), Tax-Free Savings Account (TFSA), Registered Retirement Savings Plan (RRSP), life insurance, paid time off, sick leave, all province observed holidays off, and gym membership discounts to fit your busy lifestyle!Parsons is an equal opportunity employer committed to diversity, equity, inclusion, and accessibility in the workplace. Diversity is ingrained in who we are, how we do business, and is one of our company’s core values. Parsons equally employs representation at all job levels for minority, female, disabled, protected veteran and LGBTQ+.We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY!