Overview of salaries statistics of the profession "HVAC Commissioning Engineer in Canada"

Building Energy Simulation Specialist:  Harvey 2408 Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting, and is willing to take on responsibility as his/her experience progresses.Objective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.                                        The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:   Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST / CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key players Expected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits packagePerformance bonus is available                                                                                                                                                

Building Energy Simulation Specialist:  Harvey 2409Our Company is currently seeking a self-motivated, hardworking Building Energy Simulation Specialist to join our Calgary or Edmonton Office.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting and is willing to take on responsibility as his/her experience progresses.Position: Building Energy Simulation SpecialistObjective:  The incumbent will be a key member of our companies Energy Modelling Services and Sustainability Team, reporting to the Sustainability Team Leader.The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings.Responsibilities:  The Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in new and existing commercial, residential and institutional buildingsCalculate energy consumption and demand savings associated with energy conservation measures for new and existing buildingsProvide design feedback to architects and other project stakeholdersProvide feedback to engineers on HVAC and lighting design and operationDemonstrate compliance with energy codes and standardsComplete energy code compliance reports for building permit applicationsComplete energy performance reports and documentation required to support green building certifications such as LEED®Complete energy efficiency incentive applications on behalf of clientsConduct facility site visits and energy audits as requiredDevelop written documentation concerning building design performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measureEvaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data Education & Experience:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an assetMinimum 5 years of relevant work experience doing building energy simulations with a variety of modelling software programs including IES Virtual Environment and eQUEST/CAN-QUESTExperience working in a consulting environment or the Energy Management field is an assetExperience working directly with clientsExperience working in a team based environment with a deadline oriented cultureExperience delivering written and oral reports to communicate technical analysis Technical Abilities:Should have a strong understanding of building envelope, mechanical and electrical building systems, energy markets, alternative energy technology, energy project implementation and the building construction processProficiency with Microsoft Office suite with advanced knowledge of ExcelWorking knowledge of eQUEST and IES-VE, and the ability to assist others to troubleshoot software issuesWorking knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step CodeGood foundation of HVAC design and experience in controls and commissioning would be an assetA self-starter with the ability to produce and implement creative and innovative solutionsThe ability to build long lasting relationships with clients and other key playersExpected Competencies:In order to be successful in this position, the incumbent will be expected to possess the following competencies:Analytical Thinking – Analyzing and synthesizing information to understand issues, identify options, and support sound decision makingAttention to Detail – Working in a conscientious, consistent and thorough mannerClient Focus – Providing service excellence to internal and/or external clientsContinuous Improvement and Learning – Identifying and addressing learning and development needs to enhance own performanceInitiative – Dealing with situations and issues proactively and persistently, seizing opportunities that ariseInteractive Communication – Listening to others and communicating articulately, fostering open communicationProblem Solving – Identifying problems and the solutions to themProduct Knowledge – Understanding the products and services providedResilience – Remains energized and focused in the face of ambiguity, change or strenuous work demandsTesting – Knowledge and ability to perform testing of software and/or hardware using a systematic approachWriting Skills – Ability to communicate ideas and information in writing to ensure that information and messages are understood and have the desired impact.This is a fulltime positionSalary is open depending on current experienceFull benefits package availablePerformance bonus

Building Energy Specialist:  Harvey 2475 Job Description:Our Company is currently seeking a self-motivated, hardworking Building Energy Specialist to join our Vancouver, Calgary or Edmonton Office.This is an excellent opportunity for someone who is interested in energy efficiency and sustainable building design.The ideal candidate takes initiative, is interested in pursuing a career in engineering consulting, and is willing to take on responsibility as his/her experience progresses.The incumbent will be a key member of our company Energy Modelling Services and Sustainability Team in Western Canada, reporting to the Sustainability Team Leader.The successful candidate will be responsible for applying advanced tools and techniques to the evaluation of energy performance in commercial, residential and institutional buildings, and to train less experienced staff on these tools and techniques. Responsibilities: The Responsibilities of this position include but are not limited to the following:Develop representative simulation models of HVAC, lighting, and building envelope systems to accurately estimate energy consumption and demand in commercial, residential and institutional buildings.Calculate energy consumption and demand savings associated with energy conservation measures for new and existing buildings, along with associated greenhouse gas savings.Provide design feedback to architects and other project stakeholders.Provide feedback to engineers on HVAC and lighting design and operation.Demonstrate compliance with energy codes and standards.Complete energy code compliance reports for building permit applications.Complete energy performance reports and documentation required to support green building certifications such as LEED® and the Zero Carbon Building Standard.Complete energy efficiency incentive applications on behalf of our clients.Conduct facility site visits and energy audits as required.Develop written documentation concerning building energy performance, recommended facility improvement measures, including accurate descriptions, savings potential, cost estimates and back up data to verify facility improvement measure.Evaluate, interpret, clarify and explain complex specifications, performance characteristics or other technical data.Train, coach and mentor other members of the team.Overtime as required.Qualifications, Experience, and Education:Graduation as a Mechanical Engineer from an accredited university, or as a Mechanical Engineering, Alternative Energy or Architectural Technician or Technologist.Registered (or eligible for registration) as a P. Eng., E.I.T. or C.E.T. with a Canadian Professional Association or Certifying Body.Building Energy Modelling Professional certification (BEMP), or Certified Energy Manager (CEM) an asset.Minimum 5 years of relevant work experience doing building energy assessments or simulations with a variety of modelling software programs including IES Virtual Environment.Experience working in a consulting environment or the Energy Management field is an asset.Experience working directly with clients.Experience working in a team based environment with a deadline oriented culture.The ability to effectively communicate technical analysis both verbally and in writing.A self-starter with the ability to produce and implement creative and innovative solutions.The ability to build long lasting relationships with clients and other key players.Good knowledge of reading drawings.Required Skills:Strong understanding of building envelope, mechanical, HVAC and electrical building systems, energy markets, alternative energy technology, energy project implementation, and the building construction process.Proficiency with Microsoft office suite with advanced knowledge of Excel.Working knowledge of IES-VE, EQUEST, Trace and/or HAP and the ability to troubleshoot software issues.Working knowledge of the National Energy Code of Canada for Buildings (NECB), ASHRAE 90.1 standards, and the BC Step Code.General knowledge of programming is an asset.Good foundation of HVAC design and experience in controls and commissioning would be an asset.Able to effectively communicate both verbally and in writing with all levels of the organization, including executives.Excellent time management and project management skills.High level of sound and independent judgment and reasoning.Job Specific Competencies:Analytical Thinking – Analyzing and synthesizing complex situations and information to understand issues identify options and support sound decision-making.Attention to Detail – Working in a conscientious, consistent and thorough manner.Client Focus – Provides added value through service excellence to internal and/or external clients.Continuous Improvement and Learning - Identifying and addressing learning and development needs to enhance own performance.Initiative - Dealing with situations and issues proactively and persistently, seizing opportunities that arise.Interactive Communication - Listening to others and communicating articulately, fostering open communication.Product Knowledge - Understanding the products and services provided.Testing - Knowledge and ability to perform testing of software and/or hardware using a systematic approach.Problem Solving – Identifying problems and the solutions to them.Resilience – Remains energized and focused in the face of ambiguity, change or strenuous demands.Results Management – Organizes time, work and resources to accomplish objectives in the most effect and efficient way.Teamwork – Working collaboratively with others to achieve organizational goals. This is a full time positionSalary is open depending on experienceBenefits package available after 3 months

Intermediate Marine Mechanical Design Engineers:  Harvey 2567 We are currently looking for 2 Intermediate Marine Mechanical Engineers, 1 for Victoria, BC, and 1 intermediate Marine Mechanical Engineer for Burnaby BC.  Our company is a partnership of Marine Professionals providing services in Engineering, Project Support and Consulting to the Canadian marine industry. We enjoy collaborating with clients and colleagues to provide innovative solutions to complex marine problems. We implement the latest technology, in engineering tools and new vessel technology, to provide a competitive advantage for ourselves and our customers. As the Marine Mechanical Engineer, you will work within the mechanical engineering group for new design and vessel refits projects which vary in complexity and size, from small equipment installations to whole vessel detail designs. Work will vary from on-site to office work. On-site inspection / surveys work will consist of 3D laser scanning, condition inspections, NDT surveys, data gathering and commissioning support. Design office work will make up most of the tasks and will consist of new design to refit design engineering work. Engineering work includes all phases, from concept to production design, including but not limited to concept/class level design, equipment selection, fluid flow analysis, heat/mass transfer, and implementation engineering. Responsibilities/Duties: Design and drafting of marine systems using AutoCAD and other 3D modelling software.Carry out our input system design calculations using Pipe Flow, MS Excel, etc. that meet class and regulatory requirements, and industry standards.Design of marine propulsion systems, calculations, and associated production level deliverablesWrite and provide input to specifications for refit or new vessel designs.Development of weight estimates and input data for system design3D modelling and CAD drawing tasks for production level deliverables.Perform 3D scanning and implementation of virtual reality (VR) design reviews, provide input to training and VR procedures.Providing input to budgets, schedules, and proposals for engineering projectsRepresent the company to the marine industry to further build the company reputation as the place for reliable, responsive, and affordable engineering.Note: it is anticipated that the candidate will be required to visit vessels and shipyards for various project tasks.Education and Experience: Bachelor’s Degree in engineering or equivalentHold, or be eligible for, EIT or Professional Engineers License to practice in British Columbia. (P.Eng. required for senior engineer position).Experience working in a shipyard or ship repair environment preferred. Skills, Knowledge, and Required Competencies: Demonstrated a high degree of technical knowledge and innovative engineering.Demonstrated effective abilities to work in a team-oriented environment.Strong technical writing skills to produce concise written technical specifications, procedures, and reports.Excellent oral and written communication and presentation skills.Strong design and drafting skills for marine systems.Working knowledge of 3D CAD software such as Rhinoceros 3D, SolidWorks, or ANSYS SpaceClaimWorking knowledge of ShipConstructor an asset.Working knowledge of ACAD software and Microsoft Office software suite.Availability and willingness to travel and conduct ship survey work including surveying of confined spaces.Committed to a high standard of safety and compliance with all safety laws.Excellent interpersonal skills.Good judgment and prioritization abilities.  This is a full-time position. Salary is open depending on experience. A benefit package is available after 3 months include: Competitive salaries based on experience and value added.A bonus scheme based on individual and company performance.A flexible work schedule and environmentExtended dental and health benefitsEmployee mentorshipOpen door leadership philosophyOpen floor plan design / collaborative working space  

The Opportunity:WSP is currently seeking a Measurement and Verification Analyst to support Measurement and Verification (M&V) services nationwide and work with the existing team of analysts and project associates involved in M&V works. It includes the responsibility and authority to direct various parts of M&V process and service offering aligned with the Buildings Divisional goals.The successful applicant will participate and direct multiple simultaneous complex and challenging M&V This includes reviewing work prepared by the other team members, analysts and Project Associates they are assigned to for quality assurance. M&V analysts may be called upon to support business development presentations to clients from time-to-time if the project principal/Project Directors are unavailable or support is needed.As part of normal management responsibility, the M&V analysts will regularly review the whole book of business that they are working with to ensure that timelines and budgets are being met on average. They may also be asked to attend coordination meetings at the team level to help sort out unique and complex project budgets and timelines. Assistance will also be provided to Managers/Directors to manage Commissioning Energy Performance project work with maintaining and continuously improving quality of service and work. This could include helping to train and mentor other staff members and to improve our processes to make us better and faster at the work we do. Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPWhat you can expect to do here: Verify energy and water performance of buildings/industrial facilities and validate energy/water savings from energy conservation measures for new and existing facilities. Develop & implement IPMVP -Adherent Measurement & Verification (M&V) plans, scope and consulting fee/cost for RFPs/RFQs responses, engineering studies, incentive programs sponsored by various LDC/IESO, LEED requirement. Deliver Monitoring Based Commissioning tasks in cooperation with Commissioning team members. Review bid/contract packages for quality assurance to identify M&V requirements. Review design intent and savings calculations during engineering studies. Execute and coordinate M&V activities in coordination with Energy Analyst, Energy Engineer, Construction Manager, M&E designer and commissioning agents/engineers during all project stages to assist in designing and implementing a permanent M&V infrastructure for continuous monitoring of energy water performance of facilities. Review design documents, M&E specifications, construction submittals including shop drawings of metering system to confirm all systems are included meeting M&V requirements. Review, analyze, advise, perform and manage Energy Performance Analysis including data collection from various software tools, utility bill accounting, sub-metering data analysis for end-use accounting, HVAC monitoring & Control data analysis, GHG inventory, energy and water cost analysis. Conduct EPA Energy Star entry as needed. Conduct energy benchmarking work for portfolio of buildings. Conduct and/or witness on-site spot measurements and short term data collection during construction and post-retrofit periods. Conduct site visits during construction & post-occupancy/post-retrofit operation phase and prepare and present site visit reports. Prepare and present project progress discussions, savings performance results and M&V reports to client. Develop energy consumption baseline and adjustments. Analyze energy management control systems including operational function and trend data to verify proper function. Perform on-site trouble shooting and data logging to validate and correct project performance. Team with Local Service/Sales to improve customer support, increase contract retention and recapture cancelled customers. Forecast savings shortfall and coordinate mitigation activities. Maintain customer records. Resolve customer issues and avoid litigation through problem resolution and negotiation. Perform the assigned duties with minimal supervision, while working in a team problem-solving environment. This position will have diverse accountability for multiple customers at various locations.What you'll bring to WSP: Bachelor's Degree in Engineering or Environmental Sciences and 2+ years of HVAC &/or Building Controls experience, or, in lieu of a college degree, 2-year technical degree and 3+ years of similar experience. Basic understanding of IPMVP framework and M&V Guidelines Analytical and problem solving skills, with ability to provide sound and reliable judgment in business solutions. Basic project management skill, analytical skill and computer skill 1 year performing engineering and energy savings calculations. 1 year working with M&V protocols and guidelines (ex: FEMP and IPMVP). Experience working in Measurement & Verification (M&V) and/or Monitoring and Targeting (M&T) related tasks for large Performance Guarantee, P3 and Deep Retrofit projects. Experience working with various types of meters, metering system software, building management system software, energy dashboards Proficient in Microsoft Excel. Valid driver's license Certified Measurement & Verification Professional (CMVP) Knowledge of building load simulation software programs such as EE4, eQUEST (DOE2), IES, RETScreen for conducting basic energy model calibration work Effective influencing, communicating, and negotiating skills Experience with resource management, cash flows, conflict resolution, and contract management Ability to work collaboratively in a team environment. Strong organization and planning skills. And good succinct writing skills

Duties:Reporting to the Manager, Operations and working alongside the HVAC&R Mechanic and Power Engineer, the Building Control Systems Technologist will play a key role in ensuring the facility is able to run at optimal comfort and efficiency levels with minimal downtime. Responsible for proactively improving and maintaining an optimized campus building automation system for maximized energy efficiency resulting in a healthy environment for building occupants, the incumbent will be the administrator for various other systems such as Kantech access control, exacqVision cameras, and Delta EnteliWEB DDC controls.Monitor performance of heating, cooling, and other environmental control equipment utilizing the Delta Enteliweb and JCi Metasys building automation systems (BAS).Diagnose and correct energy monitoring and control system.Work with contractors to ensure optimal system performance during the tuning phase.Assist with the repair, installation, and troubleshooting of computer-based automation systems.Monitor and read energy meters to implement changes that reduce energy consumption, in coordination with Manager, Operations.Evaluate existing systems to determine where failure exists based on energy consumption and historical data.Maintain required files, filing systems, and documentation.Establish and monitor scheduled replacement of equipment when obsolete or when a repair is ineffective to VIU standards.Coordinate, instruct, and/or reprogram the system including adjustments and direct repairs to be made to establish and maintain a workable balance between equipment efficiency and environmental quality.Program building system controllers to operate as required using logic-based functions, programming, and overall network programming/ configuration.Implement graphical changes to any visual displays showing building automation systems.Maintain and update CAD drawings for as-built purposes.Ensure compliance of operating systems and equipment within the applicable Workplace Safety & Health legislation and all Municipal, Provincial, and Federal codes and requirements. Recommend upgrade initiation when appropriate.Develop workflow automation to improve office efficiency and consistency.May require lifting, bending, and working in elevated areas utilizing scaffolding, etc., and working in confined spaces and enclosures.Ensure equipment, tools, materials, workspaces, etc., are properly maintained and kept in a clean, safe, and orderly condition.Notify customers when services are to be interrupted, when work is to be performed, and when work has been completed.Ensure clients concerns are addressed in a practical and reasonable manner.Prepare estimates of time and materials for specific projects as required.Participate in new construction and commissioning as required.Programming of programmable logic controllers (PLCs), and BAS's general control language (GCL+).Provide sketches of field changes and discrepancies for engineering corrections and drawings.Adhere to all VIU and WSBC work procedures and policies and provide safety awareness on work sites.Respond to emergencies and after-hours requests (part of emergency response team and snow/ice removal). This position is included in the Operational Needs group (CUPE Article 28.12).Required Qualifications:Diploma in Mechanical Engineering, Mechanical Systems Technology, Air Conditioning, Controls Engineering, Electronics, Electrical Technology, Instrumentation Technology, or a similar field from an appropriately accredited institution. Minimum seven years experience in HVAC industry. An equivalent combination of education and experience may be considered.Working knowledge of heating, refrigeration, electric, electronic, instrumentation, and building systems.Training and experience in the installation, operation, and maintenance of HVAC and Building Automation Systems (BAS).Demonstrated understanding of Computer and Systems Networking.Demonstrated ability to read blueprints and schematic drawings.Valid Class 5 BC Driver's LicenseAll qualified candidates are encouraged to apply; however, Canadians and permanent residents will be given priority. Vancouver Island University is a comprehensive teaching university with 13,000 students across four campuses. VIU proudly fosters student success, strong community connections and meaningful collaborations by providing access to a wide range of programs, from academic undergraduate and master’s to industry-responsive trades and vocational training. VIU is pleased to offer employees a comprehensive benefit plan; ample paid holiday time; professional development opportunities and a desirable pension plan that takes the worry out of retirement. As part of the VIU campus community, you will work with supportive colleagues within an encouraging environment and are provided with the tools and training that promote learning and development. The perks of VIU employment are multiple, and include well-being initiatives and services, strategic discounts, and flexible work opportunities.  The VIU community acknowledges and thanks the Snuneymuxw, Quw’utsun, Tla’amin, Snaw-naw-as and Qualicum First Nation on whose traditional lands we teach, learn, research, live and share knowledge.

We're improving the way we live and work by intelligently connecting energy systems, buildings and industries!!Smart infrastructure from Siemens makes the world a more connected and caring place - where resources are valued, where impact on the world is considered, where sustainable energy is delivered optimally and efficiently. It provides the flexible infrastructure to allow society to evolve and respond to changing conditions. Technology and the ingenuity of people come together to be at one with our environments and to care for our world. We do this from the macro to the micro level, from physical products, components and systems to connected, cloud-based digital offerings and services. Siemens offers a broad portfolio of grid control and automation; low- and medium-voltage power distribution, switching and control; and building automation, fire safety and security, HVAC control and energy solutions.JOIN US! WE MAKE REAL WHAT MATTERS. THIS IS YOUR ROLELeading Commissioning activity for Substation Automation / Feeder Automation Covering RTU, SCADA /HMI and Network at Domestic and International project sitesTravel: 70%-80%Competency Technical Must Have:1) Leading team of 2-3 Engineers and service vendor with effective verbal and written communication2) Process and tool to manage resource and reporting purpose3) Knowledge of PC Networking , switch, router, GPS, Firewall4) Substation Automation : Process Level, Bay Level, Control Level5) Substation Protocol Knowledge : Modbus, T101/104, IEC 61850, DNP3, OPC including configuration and analysis of these protocols by applications and tools6) OS and Tools : Windows , PC Applications, PC communication, serial/ IP networking.Debugging tools: Modscan, IEC Tester , IED Scout, Wireshark "7) Added advantage for work experience on Siemens SICAM ( PAS/PQS, ToolBox, WinCC, SCC, SDM) solutionGood to have:1) Network diagnosis, Cyber Security2) Knowledge of other OEM products in SAS and Feeder Automation3) Scripting knowledge, Programming by IEC 61131-3,SQLCompetency Soft Skill:1) Effective communication skill verbal and written for customer interaction2) Well behaved and dedication for work3) Vendor coordinationExperience:(B. TECH/BE) Experience 3-5 yearsWE'VE GOT QUITE A LOT TO OFFER, HOW ABOUT YOU?We're Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we encourage applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and creativity and help us shape tomorrow.Salary: . Date posted: 03/28/2024 09:16 PM

Change the future with us. We are looking for dedicated and talented people who tackle ever-changing challenges, customer needs, and questions from colleagues with clever concepts and creativity. We embrace change and work with curious minds re-inventing the future of work. Join us and let us focus together on what's truly important: making lives better with new ideas and the latest technology around the world. Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2024 and Greater Toronto's Top Employers 2022. What will you do? We are looking for an HVAC Technical Sales and Operations Manager to support our Value-Added Partner (VAP) Channel (Indirect Channel) and other Channels in our Siemens Building Products (BP) group. As a Technical Sales and Operations Manager your primary focus will be to provide technical product sales, and application expertise related to the Building Automation Product Line. You will be responsible for consulting, training, and supporting Siemens Value Added Partners (VAPs) providing expertise and leadership in the successful and profitable engineering, installation, and commissioning service of the Siemens Building Automation Products. Your contribution to the success of the Building Products Business Unit will be by focusing on onboarding new partners using Siemens HVAC Portfolio, TALON, Desigo Automation product lines, BP Systems (BACnet / LON): Tridium Niagara, Gamma, Desigo, Climatix and legacy products along with a detailed understanding and experience with day-to-day Partner operations and in-depth job understanding (i.e., project management, engineering, commissioning, etc.). You will also provide technical sales assistance during discussions with either customers, contractors or specifying engineers to promote Siemens or help close sales. You will report to the Business Unit Head. Onboarding all Automation VAP partners, teaming with the territory sales manager. Providing updates and trainings and developmentsto VAPs in the application of new and existing products Reviewing, pre-qualifying and assessing new potential VAPs Responsibility is primarily tactical/operational in nature but greatly drives the success of the strategy. Responsibilities include: Independently manage partners to achieve profitable growth and volume requirements Present, promote, and sell Automation solutions to existing and prospective partners Establish, develop, and maintain positive business and customer relationships Develop partnerships with existing customers to increase their share of wallet while prospecting new partners to increase market share and exceed sales targets Develop a proactive response to customer needs and business priorities utilizing Siemens resources and operating in a time-efficient and organized manner Define strategies and business plans to increase market growth across the account base to meet or exceed sales targets Monitor sales activity and conduct regular reviews with partners Become a trusted advisor to our partners by demonstrating strong industry and product knowledge Perform to plan. Set weekly, monthly, quarterly, and annual sales goals for overall sales, sales calls, product mix/segmentation, new prospects, training, and many other sales metrics. Develop and demonstrate a strong understanding of the customer's business. Identify where Siemens can add value through our technology and solutions. Penetrate new markets or accounts, identify, and develop relationships with the key decision makers, uncover new business opportunities, recommend differentiated solutions, negotiate, and win new customers. Identify opportunities for replacing competitive solutions with Siemens solutions, qualify the opportunities, progress, and close. Effectively leverage internal Siemens resources to maximize win rate. Represent Siemens with our customers in a responsive, professional, proactive, and ethical manner that reflects well on our company and core values Engage at multiple levels with target customers Coordinate customer-facing and internal efforts to produce winning value propositions and proposals that win new customers and achieve or exceed business goals. Leverage best-in-class sales methodology to maximize sales potential Strong emphasis on disciplined usage of our Customer Relationship Management Software (CRM) and accurate weekly forecasting, monthly pipeline reviews, and quarterly plan. Maintaining a funnel of vertical market prospects to add Siemens automation solutions and products, optimizing current market conditions. Assist in developing and rolling out programs for the 3rd party solution partner channel. What will you need to succeed? Bachelor's degree or equivalent experience with a concentration in engineering. 5+ years' experience required in field operations or engineering role working with Value Added Partners or distributors. 5+ years of technical experience preferred, preferably in a field office in the HVAC industry. Ability to travel. Preferred qualifications: 5+ years of AutoCAD experience a plus. Solid understanding of the HVAC industry. Experience in an HVAC training role a plus. Proven communication and presentation skills. Self-motivated teammate with the ability About us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted. #LI-HybridSiemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 03/29/2024 02:48 PM

BASIC QUALIFICATIONS- High school or equivalent diplomaDESCRIPTIONThe Facility Engineer with be responsible for Data Center Engineering Operations within an Amazon Data Center including risk management and mitigation, corrective and preventative maintenance of critical infrastructure, vendor management and metric reporting. Responsibilities include: - Assist the on-site management of contractors, sub-contractors and vendors, ensuring that all work performed, is in accordance with established practices, procedures & local legislation.- Maintaining performance benchmarks, conduct analyses & prepare reports on all aspects of the critical facility infrastructure operations & maintenance.- Generate Change Management requests & Incident Management tickets for DCEO as directed. - Learn and contribute to documentation relevant to business & facility operations.- Assist with the installation of the racks and the provision of power/cooling within its constraints.- Be involved with the routine maintenance and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc.- Assist and learn about the design, implementation, commissioning and build out of new facilities.- Assist with the management of the Facility assets and the provision of infrastructure & inventory asset management as directed.- May participate in Construction & Operational Meetings as required.- Assist with Work Order compliance and review of contractual SLAs.- Interface with Infra Ops teams for day to day operational requirements.- Assist in the resolution of any infrastructure engineering or services issue.- Delivery of exceptional customer service and satisfaction.- Meet daily hours of operations, shift and on-call requirements for response during shift rotations.We are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS- Experience leading and managing operations of critical facilities which require in-depth knowledge in electrical, mechanical, and control systemsAcknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/04/2024 10:21 PM

BASIC QUALIFICATIONS - Bachelor's degree or relevant work experience in Construction Management, Architecture, Structural, Civil, Mechanical or Electrical Engineering - 7-10 years of work experience in design, construction or program management in mission critical facilities. - Be able to read and interpret construction related drawings for all disciplines. - Possess demonstrable leadership and problem solving skills. - Be a motivated, highly dependable individual with limited oversight. - Ability to evaluate the constructability of new technologies, and determine construction methods of data center equipment and facilities. - Ability to carry new design concepts through exploration, development, and into deployment/mass production. - Ability to define data center system-level architecture, specify/document performance and equipment requirements to vendors and contractors, communicate conceptual designs, and create/maintain project documentation before, during and after construction - Ability and willingness to think outside of the box to find creative and innovative solutions prior to and during the construction process to reduce costs and schedules with no impact on quality and reliability. - Possess excellent communication skills and have an attention to detail, and be able to maintain high quality standardsDESCRIPTIONThis position will be based in Sydney. The Data Center Construction Manager (CM) is responsible for managing some of the most technical, cost efficient, and fast paced construction project schedules achievable. Amazon Construction Managers are constantly challenged to drive continuous improvement and deliver the highest quality, most technically efficient data centers in the world.As a Data Center CM you will be a part of highly creative, efficient team tasked with tackling the most fascinating and challenging problems in building Amazon data facilities. Amazon CM's are always at the forefront of the construction industry in terms of innovation, and maintain a focus to deliver the most innovative products to our customers.Our data centers are industry leading facilities in terms of energy efficiency and cost effectiveness. The Data Center CM is ultimately responsible for the day to day construction oversight and management of the contractors. The CM will also be utilized as a leader in their specific discipline (construction management, building services, architectural, electrical or mechanical engineering) and be responsible as a team member for delivering construction of some of the most sophisticated electrical and mechanical systems in the world.At Amazon we leverage unique opportunities presented to us by owning everything from the substation, to the server, and back to the cooling towers. We are diverse, upbeat, creative, team-oriented construction professionals working on a daily basis to develop data centers that are changing the face of data facilities.Responsibilities of the Data Center Construction ManagerAt Amazon we are a global team responsible for the design and operation of industry leading, geographically diverse, large scale critical facilities. Each team member is a highly motivated individual with demonstrated construction management and analytical expertise in the areas of complex, mission critical facilities. Daily responsibilities will include all aspects of the entire data center lifecycle construction starting with the site feasibility, through the procurement of the design teams and design review, daily construction oversight, and commissioning of completed facilities.The Data Center CM will be responsible for:- Project management and oversight of construction related activities for new builds or general capital projects in Melbourne. This will include the ownership of the project scope, timeline, and budget.- Driving costs down and schedules shorter while maintaining quality.- Provide Construction Management for specific initiatives aimed at increasing the resiliency of our data centers.- Review of constructability of electrical and mechanical system and buiding designs associated with the construction of new data centers or the optimization of existing data centers.- Creation of project scope and equipment requirements, assist with request for proposals, and capital requests.- Total project quality including the assisting with commissioning and integrated system testing and oversight of the execution of the project.- Issue/Manage the Request for Information process during construction and coordinate construction administration with engineers- Recording and reporting key metrics to team members and management.- Concurrently managing multiple projects including new data center building and capital improvement projects associated with existing data centers.- Operational support of installed facilities including review of procedures, best practices, and maintenance initiatives.- Be a leader within the group as well as within internal and external teams that support the data center.- Travel to datacenter sites for electrical systems audits, mechanical system reviews, constructability reviews, startup testing, and full commissioning, as required.Key job responsibilitiesDeliver high quality low cost Data Centers for the AWS Cloud. Our Construction Managers are highly skilled professionals with a passion for delivering for Customers. A day in the lifeAWS Construction Managers lead the delivery of our Data Center projects. They work closely with Internal Stakeholders and Contractors, resolving project issues, managing RFIs, Change Orders and other key delivery functions. Our CMs spend the majority of the week on site working closely with our vendors to drive project outcomes.We are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS - Experience directly related to the design or construction of large data center facilities, either colocation or client owned/operated. - Previous vendor and contractor/subcontractor negotiation and management skills associated with construction and project execution. - Experience with fast track design/build projects and or multiple significant upgrade projects. - Experience with large scale technical operations or compute farms. - Knowledge of Australian building codes and regulations including Fire Codes, Building Codes, Energy Efficiency Codes, Sanitary Codes and Safety Codes. - Knowledge and experience with large scale mechanical and power systems. - Experience in power and mechanical system reliability and risk assessment studies (SPOF) - Experience with mechanical air handling units, power management and power monitoring systems - Work experience with global international companies, both in larger APAC region and within US based organizations.Acknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/08/2024 10:34 AM

We're enhancing the way we live and work by intelligently connecting energy systems, buildings and industries!!Smart infrastructure from Siemens makes the world a more connected and caring place - where resources are valued, where impact on the world is considered, where sustainable energy is delivered reliably and efficiently. It provides the flexible infrastructure to allow society to evolve and respond to changing conditions. Technology and the ingenuity of people come together to be at one with our environments and to care for our world. We do this from the macro to the micro level, from physical products, components and systems to connected, cloud-based digital offerings and services. Siemens offers a broad portfolio of grid control and automation; low- and medium-voltage power distribution, switching and control; and building automation, fire safety and security, HVAC control and energy solutions.Job Description: Commissioning Engineer - West Region (Rest of Maharashtra, MP, and Goa) Immediate Location : PunePosition Summary:Siemens Smart Infrastructure (Pune) is seeking a highly skilled and experienced Commissioning Engineer for the commissioning activities in the West Region, which includes the Maharashtra, Madhya Pradesh and Goa. Current location in Indore. The ideal candidate should have a minimum of 8 to 10 years of relevant experience and possess sound knowledge of intelligent Building Management Systems (iBMS) and ELV systems like Fire, Public Address (PA),Access control and Closed-Circuit Television (CCTV) systems for building automation. The Commissioning engineer will be responsible for managing a team, demonstrating excellent communication skills, and being available to travel across the territory as required. Candidates with experience on the Siemens iBMS Desigo Platform will be given additional consideration.Detailed Responsibilities:- Lead and supervise the commissioning activities in the respective projects, ensuring that projects are delivered on time, within budget, and according to the required quality standards.- Responsible for Pharma Documentation like preparation of Configuration Documents, DQ, IQ and OQ , shall support in CSV documentation with customer.- Oversee the commissioning of iBMS and ELV systems, including Fire, PA, ACS and CCTV, for building automation projects.- Collaborate closely with project teams, clients, and stakeholders to understand project requirements and ensure successful execution of commissioning activities.- Provide technical guidance and support to the commissioning team, ensuring that they are equipped with the necessary skills and knowledge to perform their tasks effectively.- Conduct site visits and inspections to monitor the progress of commissioning activities, resolve any technical issues, and ensure compliance with safety regulations.- Develop and maintain commissioning plans, procedures, and documentation, including test protocols, reports, and as-built documentation.- Act as the main point of contact for clients regarding commissioning activities, addressing their concerns, and providing regular updates on project status.- Stay updated with industry trends, best practices, and new technologies related to iBMS and ELV systems, incorporating them into commissioning processes where applicable.- Continuously evaluate and improve commissioning processes to enhance efficiency and effectiveness.Requirements:- Minimum of 10 years of relevant experience in commissioning iBMS and ELV systems for building automation.- Strong knowledge of intelligent Building Management Systems (iBMS) and ELV systems, including Fire, Public Address (PA),ACS and Closed-Circuit Television (CCTV) systems.- Excellent communication and interpersonal skills, with the ability to effectively lead a team and interact with clients and stakeholders.- Willingness to travel extensively across the West Region to perform commissioning activities.- Experience with the Siemens iBMS Desigo Platform is highly desirable and will be considered an advantage.- Strong problem-solving and decision-making abilities, with a focus on delivering high-quality results.- Ability to work independently and manage multiple projects simultaneously, meeting deadlines and prioritizing tasks effectively.- Strong attention to detail and a commitment to ensuring compliance with safety and quality standards.- Bachelor's degree in Electrical Engineering or a related field is preferred, but equivalent experience will also be considered.Note: This job description provides a general overview of the required skills, responsibilities, and qualifications for the role of Commissioning engineer in the specified region. Duties and responsibilities may evolve or be modified as per the company's requirements.Make your mark in our exciting world of SiemensWe're Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination, and help us shape tomorrow.Find out more about Smart Infrastructure at: https://new.siemens.com/global/en/company/topic-areas/smart-infrastructure.html and about Siemens careers at: www.siemens.com/careersSalary: . Date posted: 04/10/2024 02:31 PM

BASIC QUALIFICATIONS- High school or equivalent diplomaDESCRIPTIONThe Facility Engineer with be responsible for Data Center Engineering Operations within an Amazon Data Center including risk management and mitigation, corrective and preventative maintenance of critical infrastructure, vendor management and metric reporting. Responsibilities include: - Participate in a 24/7 rotating shift pattern - Assist for the on-site management of contractors, sub-contractors and vendors, ensuring that all work performed, is in accordance with established practices, procedures & local legislation. - Maintain performance benchmarks, conduct analyses & prepare reports on all aspects of the critical facility infrastructure operations & maintenance. - Generate Change Management requests & Incident Management tickets for events that DCEO are responsible to manage. - Work with DC managers (IT) and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability, sustainability and efficiency. - Contribute to documentation relevant to business & facility operations. - Responsible for the installation of the racks and the provision of power/cooling within it's constraints. - Be involved with the management of both routine maintenance and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc. - Assist in the design, implementation, commissioning and build out of new facilities. - Assist with the management of the Facility assets and the provision of infrastructure & inventory asset management. - Attend and participate in regular Construction & Operational Meetings as required. - Assist with Work Order compliance to ensure all contractual SLA's are achieved. - Interface with Infra Ops teams for day to day operational requirements. - Assist in the resolution of any infrastructure engineering or services issue. - Delivery of exceptional customer service and satisfaction.We are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS- 2+ years of data center engineering experienceAcknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/12/2024 10:11 PM

BASIC QUALIFICATIONS- BS Mechanical or Electrical Engineering degree.- 5 years' experience in any one of the following areas: Commissioning; Mechanical or Electrical Design; Construction Project Management; Control System installation or maintenance; HVAC testing and balancing; Facilities operations and/or maintenance.- The successful candidate will work at sites located in APJC and support the Global team.- Work in construction environment and unfamiliar conditions requiring Personal Protective Equipment (PPE)- Troubleshooting including the use of handheld equipment- Work longer than eight hours in duration with potential for night and weekends works- Ability and willingness to travel domestic and internationally for up to 50% of the timeDESCRIPTIONAWS is looking for a dynamic Commissioning Engineer to support the delivery of AWS Data Centers. It would be the responsibility of the successful candidate as an Amazonian to learn and follow the Leadership Principles.The responsibilities of the ACx Commissioning Engineer (CxE) include, but are not limited to, oversight and coordination of multi-discipline division of work related to pre-commissioning and commissioning of Amazon critical infrastructure construction and special projects. The CxE is responsible for supporting and supervising vendors, contractors and other teams involved in the construction and commissioning of various systems including medium and low voltage power systems, Generators, UPS, HVAC, Chilled Water, BMS and EPMS systems. He or she provides multi-discipline input into the scheduling, designing and planning of projects. In addition, the CxE will be required to review all multi-discipline integrated systems testing and commissioning documents to ensure they are compliant with the basis of design, specifications and standards of the project. It is the CxE responsibility to ensure that all commissioning procedures follow the appropriate safety practices, policies and procedures. He or she enthusiastically participates in all project and company safety programs. CxE must also audit commissioning activities continuously to ensure compliance with environmental, quality, and safety requirements. The CxE proactively communicates with the ACx Regional Manager and the ACx team to ensure that the applicable test documents are created in accordance with all commissioning requirements. Following the AWS project reporting format, the CxE is responsible for weekly reporting of commissioning progress and metrics for assigned project. The CxE will work on multiple initiatives and projects simultaneously, under tight deadlines according to prescribed metrics.Key job responsibilitiesSystems Analysis- Understand the design concept and intent by reviewing mechanical and electrical construction documentation, including drawings, specifications, vendor submittals and sequences of operations- Provide recommendations and feedback regarding the design, equipment selection, pre-functional checklists, startup and functional test scripts developed by others, maintainability, construct-ability and commission-ability- Review documentation for compliance with Amazon standards, industry standards, and design specifications- Assess the capability of commissioned systems to match the design Systems Validation- Verify the system's performance, including establishing acceptance criteria, obtaining completed reports, performing verification and spot checking for validation- Assist in as-built documentation and review for accuracy and completeness- Communicate commissioning issues, questions and concerns through proper channels in a timely manner- Work with internal and external teams to assure testing equipment is calibratedProject Management- Manage and commissioning of critical infrastructure to properly test and validate installation, operation and performance of mechanical, electrical and controls systems.- Ability to work on concurrent projects in multiple geographical regions- Vendor management and coordinate with commissioning authority to work in accordance with Amazon practice and documentation- Return complete and legible commissioning documentation to the ACx regional manager for alignment with global standards and policies.- Develop project specific commissioning schedule and plans- Represent ACx in projects coordination meetings with vendors and contractors- Maintain commissioning documentation- Track commissioning issues until resolved and closedWe are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS- Advanced knowledge of Microsoft Office Suite - Word, Excel and Outlook required; advanced knowledge of SharePoint (or similar) preferred.- Advance knowledge of mechanical systems and basic knowledge of electrical and fire alarm/life safety systems.- Ability to read and understand construction documents (design drawings, control diagrams, specifications, etc.). Acknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/16/2024 09:03 AM

Looking for challenging role? If you really want to make a difference - make it with usSiemens Energy is focused on helping customers navigate the world's most pressing energy problems.As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees.With us, you can do something significant that benefits society and human progress.Your new role - challenging and future-oriented Ensures compliance with the requirements, regulations and procedures governing occupational environmental health and safety (EHS) and promotes and leads the Zero Harm Culture for the scope within his responsibility. Responsibility for results: Leadership role at the site in terms of deadlines, budget and quality parameters. Ensures the customer's economic success and satisfaction. Assumes economic responsibility for the construction site. Represents the site (as a member of Project Management) in all decision-making committees. Costumer Management: Actively and attentively listens to the customer's opinions and suggestions and cultivates/promotes/maintains a professional relationship to the customer. Understands and allows for the operating environment of the customer when making recommendations and decisions. Involves the customer in the decision-making process and advises him when he takes decisions. Provides support to the customer in terms of his targets / objectives and serves as a 'sparring partner' when dealing with the strategic importance of solutions and their practicability. General administration: Responsible for establishing the requisite site infrastructure and performing inventory control in line with company guidelines. Provides support in the generation of and is responsible for implementation the housing concept in effect at the site (if necessary camp administration) as well as the personnel transport concept. Responsible for issuing site procedures pertaining to the site organization. Site controlling and reporting: Responsible for the site and the entrepreneurial obligations imposed on him as stipulated in the national safety regulations. Establishes efficient methods / processes for site controlling and reporting that at any time permits obtaining an up-to-date overview of the site status. Continually analyses and monitors achievement of set targets in terms of professional, financial as well as scheduling objectives, also checks the quality of processes and profitability. Recognizes non-conformances at the site in due time, identifies the causes of problems and eliminates them. Evaluates and documents the site status. Regularly informs the customer, management and the project team as to the site status. Organizes an efficient QA Controlling System at the site. Is responsible for the safety and worker safety of all employees at the site in line with applicable stipulations and contracts. Risk management: Is aware of the sources of risks / opportunities at the construction site, collects relevant data and makes them available. Together with CSM, assesses the impact and risks / opportunities at the construction site and evaluates these from a financial standpoint (e.g., economic, organizational risks, employee / skill capacities, contractual risks, acceptance criteria, change request Site Installation Engineer Professional & Expert strategies for risk avoidance or mitigation of risks for the project and implements these strategies, e.g. formulation of claims and follow-up thereof, as well as defense against claims. Employee Management: Plans the requisite site employee resources for the site (qualitative: skills, quantitative: headcount). Stipulates deployment of employees and optimally utilizes resources. Ensures targeted and comprehensive communication within the site team. Agrees on targets with the site employees and delegates defined responsibilities to the right employees. Coaches the team /individual employees and gives individuals and groups feedback on performance and expectations in the course of the project. Holds performance reviews that focus on the comparison of specified/actual skills (knowledge, experience) and competencies in the context of current project tasks and derives necessary training and career development measures (as or with manager who has disciplinary responsibility) to give feedback on performance and conduct during the project and recommend future career development measures. Your opportunities for personal growth The opportunity to engage in an exciting environment on challenging projects Strong professional support and working with colleagues around the world Professional development opportunities within the company To be part of a growing function with a dynamic, informal and inspiring working environment in a position that entails a large responsibility We don't need superheroes, just super minds Several years of experience in construction of complex industrial projects (preferable for combined cycle power plant projects) Has worked at several sites as a technical supervisor / technical commissioning supervisor Has already gathered experience in leading and managing subordinates Has lived and worked abroad (intercultural experience), experience with working in teams with an international makeup, acceptance of other cultures is a prerequisite Degree (or equivalent) in a mechanical, electrical or civil engineering discipline Good communication and leadership skills PM Certification is a plus (e.g. IPMA Level B or C) Willingness to work in any foreign country, mobility, fitness for service in tropical areas. Language competencies: English: Advanced - reading and writing Spanish would be a plus We've got quite a lot to offer. How about you?This role is based in Gurgaon .You'll also get to visit other locations (project sites) in India and beyond, so you'll need to go where this journey takes you. In return, you'll get the chance to work with teams impacting entire cities, countries - and the shape of things to come.We're Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination, and help us shape tomorrow.Salary: . Date posted: 04/19/2024 09:21 PM

Change the future with us. We are looking for dedicated and talented people who tackle ever-changing challenges, customer needs, and questions from colleagues with clever concepts and creativity. We embrace change and work with curious minds re-inventing the future of work. Join us and let us focus together on what's truly important: making lives better with new ideas and the latest technology around the world. Why you'll love working for Siemens! Freedom and a healthy work- life balance- Embrace our flexible work environment with flex hours, telecommuting and digital workspaces. Solve the world's most significant problems - Be part of exciting and innovative projects. Engaging, challenging, and fast evolving, cutting edge technological environment. Opportunities to advance your career and mentorship programs on a local and global scale. Competitive total rewards package. Profit sharing available. Rewarding vacation entitlement with the opportunity to buy and sell your vacation depending on your lifestyle. Contribute to our social responsibility initiatives focused on access to education, access to technology and sustaining communities and make a positive impact on the community. Participate in our celebrations, social events and offsite business events. Opportunities to contribute your innovative ideas and get paid for them! Employee perks and discounts. Diversity and inclusivity focused. Siemens is proud to be an eight-time award winner of Canada's Top 100 Employers, Canada's Greenest Employers 2022, Canada's Top Employers for Young People 2024 and Greater Toronto's Top Employers 2022.As BAU Project Manager, you will provide direction and supervision of building automation construction projects to ensure successful delivery. You will oversee project managers and project status. Your project management skills paired with your Building Automation (BAU) / Building Automation Systems (BAS) technology knowledge/experience, and financial acumen will be critical to your success in this role! Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations. Travel/visit within areas covered by the branch. Review the project in-depth to schedule deliverables and estimate costs. Schedule installation, start-up, commissioning, turnover and warranty. Deliver project revenue forecasting and reporting results to Branch Operations Manager. Manage revenue and gross margin to achieve monthly and annual business plans. Monitor project status and control job costs to maintain margins. Direct and supervise the development of project plans and ensure plans are followed. Oversee supervision of all installation and retrofit work and personnel on assigned jobs. Ensure schedules are maintained and projects proceed in accordance with contract documents and customer expectations. Determine resource needs (eg staffing tools) and provide any corresponding documentation. Provide technical and operational support for the sales teams including proper pricing and scope of work definition for project opportunities. Communicate project information (eg equipment changes) to engineering operations and sales employees as needed to minimize cost and delay throughout the estimating bidding and operations phases of each project. Build and maintain an effective operations organization committed to customer and employee satisfaction and profitable growth. Act as the main point of customer contact for the project delivery and issues mitigation. What will you need to succeed? 3-5 years project management and technical experience in Building Automation System field BAU/BAS, but would consider applicants with a strong background in either HVAC or Mechanical. Project Management Professional (PMP) designation highly preferred but not mandatory. Strong knowledge of building electrical, and mechanical systems. Knowledge of CAN/ULC standards, Canadian Building and Electrical codes. Proficiency with Microsoft Project or alternate Project Management Software. Financial acumen (costing/ budgeting/ forecasting etc.). Excellent communication and presentation skills; and ability to communicate with contractors, consultants, and executives. Fluent written and verbal communication skills in English. Asset: Field Technician/Electrical experience. Note: This is not an IT Project Manager or a general project management role. This is a specialized role requiring expertise in Building Automation / Building Automation Systems, building codes, electrical and/or mechanical is essential to service our commercial customers.#LI - Office/On-siteAbout us. We share our ideas and champion the people behind them. For over 110 years, Siemens Canada has stood for engineering excellence, innovation, quality and reliability. Active across Canada, the company focuses on intelligent infrastructure for buildings and distributed energy systems and on automation and digitalization in the process and manufacturing industries. Siemens brings together the digital and physical worlds to benefit customers and society. Through Mobility, a leading supplier of intelligent mobility solutions for rail and road transport, Siemens is helping to shape Canada's passenger rail services. Via its majority stake in the publicly listed company Siemens Healthineers, Siemens is also a leading supplier of medical technology and digital health services. In addition, Siemens holds a minority stake in Siemens Energy, a global leader in the transmission and generation of electrical power. Making a difference together we raised $385,000 towards charitable contributions, support over 38 non-profit organizations and planted 660 trees in our local communities. Siemens Canada has 2,500 employees from coast-to-coast and 24 office and production facilities across Canada. Join our team of approximately 293,000 talented professionals in more than 190 countries/regions and help us tackle the most exciting challenges to build a successful future together. So, what are you waiting for? Take your next career step with us. To learn more about Siemens Canada, visit our website at www.siemens.ca While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted.Siemens is committed to creating a diverse environment and is proud to be an equal opportunity employer. Upon request, Siemens Canada will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. All qualified applicants will receive consideration for employment.By submitting personal information to Siemens Canada Limited or its affiliates, service providers and agents, you consent to our collection, use and disclosure of such information for the purposes described in our Privacy Notice available at www.siemens.ca.Siemens s'engage à créer un environnement diversifié et est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi. Sur demande, Siemens Canada prendra des mesures d'accommodement raisonnables pour les personnes handicapées, dans le but de soutenir la participation des candidats dans tous les aspects du processus de recrutement. Tous les candidats qualifiés seront pris en considération pour ce poste.En transmettant des renseignements personnels à Siemens Canada limitée ou à ses sociétés affiliées, à ses fournisseurs de services ou à ses agents, vous nous autorisez à recueillir, à utiliser et à divulguer ces renseignements aux fins prévues dans notre Déclaration de protection de la confidentialité, que vous pouvez consulter au www.siemens.ca.Salary: . Date posted: 04/19/2024 08:46 PM

BASIC QUALIFICATIONS- 2+ years of electrical or mechanical, or 2+ years of data center or mission critical facilities (example: hospital, military facility, public safety facility, etc.) experience- Strong verbal and written communication skills.- Strong leadership and organizational skills.- Strong attention to detail.- Ability to prioritize in complex, fast-paced environment.- Familiar with the concepts and interaction of Service Management systems (Problem & Change)- Experience with the development of MOPs & SWMS for planned works- Physical Security protocol awareness- Computer literate, confident with Office SuiteDESCRIPTIONThe Facility Engineer with be responsible for Data Center Engineering Operations within an Amazon Data Center including risk management and mitigation, corrective and preventative maintenance of critical infrastructure, vendor management and metric reporting. Responsibilities include: - Participate in a 24/7 rotating shift pattern - Assist for the on-site management of contractors, sub-contractors and vendors, ensuring that all work performed, is in accordance with established practices, procedures & local legislation. - Maintain performance benchmarks, conduct analyses & prepare reports on all aspects of the critical facility infrastructure operations & maintenance. - Generate Change Management requests & Incident Management tickets for events that DCEO are responsible to manage. - Work with DC managers (IT) and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability, sustainability and efficiency. - Contribute to documentation relevant to business & facility operations. - Responsible for the installation of the racks and the provision of power/cooling within it's constraints. - Be involved with the management of both routine maintenance and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc. - Assist in the design, implementation, commissioning and build out of new facilities. - Assist with the management of the Facility assets and the provision of infrastructure & inventory asset management. - Attend and participate in regular Construction & Operational Meetings as required. - Assist with Work Order compliance to ensure all contractual SLA's are achieved. - Interface with Infra Ops teams for day to day operational requirements. - Assist in the resolution of any infrastructure engineering or services issue. - Delivery of exceptional customer service and satisfaction.We are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS- 2+ years of data center engineering experience- Degree or Technical (Military/ Trade School) Degree and relevant experience- Bachelor's Degree in Electrical Engineering, Mechanical Engineering or relevant discipline.Acknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/22/2024 10:50 PM

BASIC QUALIFICATIONS- 5+ years experience working in satellite communications ground systems and operations- 3+ years of work experience in design and commission of radio/mobile telecommunications/RAN installations or SATCOM earth stations.- 2+ years of network integration experience in troubleshooting and on-site support.- Bachelor's degree with a technical discipline or equivalent experienceDESCRIPTIONProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Have you ever wanted to become involved in the global rollout of satellite earth stations for a high-performance satellite constellation? We are looking for an experienced Satellite Communications ground engineer to join Project Kuiper's ground gateway implementation team. You will lead efforts to design, deploy and commission high performance ground gateways, collaborate with subject matter experts to develop highly efficient gateway deployment processes and mechanisms, and be the on-site team lead for installation of Kuiper gateway terminals. Kuiper ground gateways enable our low-latency, high-speed broadband satellite communication constellation allowing Amazon to serve un-served and under-served communities around the world.Key job responsibilitiesIn this role, you will:- Lead teams performing on-site ground terminal installations and commissioning up at hundreds of sites globally.- Deliver operational sites to the Kuiper Operations Team, including physical, network, RF, calibration and site acceptance.- Support site troubleshooting and maintenance to provide an unparalleled Customer experience.- Engage with industry leading partners to execute our installation strategy.- Develop installation processes, mechanisms, and standard operating procedures supporting terminal installation at scale.- Design system test and verification processes and document in at-scale mechanisms.- Manage tactical interactions with partners to ensure milestones, deliverables, and technical artifacts are technically compliant with project objectives and programmatic requirements.- Work with stakeholder teams to deliver terminals in sync with ground implementation goals.- Develop of team training plans and materials.- Communicate regularly with senior management on status, risks and change control.- Relentlessly simplify and innovate to solve challenging site installation and integration problems.- Own our efforts in the APAC region, potentially growing and leading our team in the region.A day in the lifeAs a Gateway Commissioning Engineer, you will provide both engineering and on-site leadership to teams performing installation of our ground gateway systems. You will travel extensively and be responsible for the installation of each site and direct the work of other team members at sites. You will also be the on-site engineer for performance of site configuration and acceptance testing. These systems provide mission critical communications with Kuiper satellites. Ground terminals include state of art tracking antennas, modems, and innovative supporting systems. About the teamThe Ground Systems team is responsible for the architecture, design, build, and installation of Kuiper's Ground and TT&C Gateways. Our Ground Gateways enable high data rate, low latency communications between Kuiper points of presence and our Low Earth Orbit Satellite constellation. The team works closely with Ground Infrastructure Services, Networks, Regulatory, Payload Test, and RF Systems teams to ensure Kuiper provides a seamless customer experience.We are open to hiring candidates to work out of one of the following locations:Sydney, NSW, AUSPREFERRED QUALIFICATIONS- Experience leading projects among cross functional teams, building sustainable processes and coordinating delivery schedules.- Experience with satellite communications earth stations or network development, deployment, and operation- Experience leading globally located earth station projects- Ka-band experience as related to earth/ground station infrastructure- Ability to work collaboratively as a member of a highly motivated team who insists on the highest standards and deliver systems which delight customers- Experience leading and mentoring junior engineers- Experience with Microsoft Office applications such as (Word, Excel, Project, and PowerPoint)- Excellent technical, problem-solving and communication skills- LEO and/or MEO satellite systems experience.- Expertise with program management tools (Smartsheet, Confluence, JIRA).Acknowledgement of country:In the spirit of reconciliation Amazon acknowledges the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.IDE statement:Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer, and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected attributes.Salary: . Date posted: 04/22/2024 10:45 PM

Title: Validation Engineer / Specialist - Reports to Director, ValidationPosition SummaryThe Validation Engineer / Specialist is a senior technical professional, and part of a team who’s responsible for the completion of all phases of assigned qualification and validation projects ensuring full compliance to regulatory standards and Grifols Canada Therapeutics Inc (GCT) requirements. This position may be involved with only a single aspect or multiple aspects of the following validation areas: utilities and facilities, equipment, automation, process or cleaning validation. This position supports site projects, technical transfer, and ongoing qualification maintenance.Key Duties and ResponsibilitiesPrimarily responsible for the design, authorship, and execution of commissioning, qualification and validation studies in any of the following areas:Utilities Qualification (ex. Purified Water, WFI)Facilities Qualification (ex. HVAC and Environmental)Equipment QualificationAutomation Qualification (ex. Room Monitoring System, Building Automation System)Process ValidationCleaning ValidationProvides technical subject matter expert (SME) support to change controls, investigations, deviations, and CAPAsIndividual must work on complex assignments, where analysis of situations or data requires an in-depth evaluation of various factors or intangible variables.Independently designs, authors, executes and summarizes qualification and validation studies.Partners with SMEs to ensure smooth and efficient execution of testing strategies. Develops testing strategies and applies qualification / validation best practices.Collaboratively conducts risk and impact assessments.Supports development and review of standard operating procedures (SOP) and qualification / validation assessments.Calculation and interpretation of data for qualification and validation studies.Primary subject matter expert in audits and regulatory agency inspections.Supports development of best demonstrated qualification / validation practices within the validation department, based on current industry practices and guidelines.Exercises judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria for obtaining results. May determine methods and procedures on new assignments.Demonstrates continuous improvement with respect to increasing job knowledge and proficiency related to qualification / validation in the biopharmaceutical industry, as well as technical understanding/problem solving capability.Manages successful completion of projects within boundaries of quality, time and budget.Based on significant technical expertise, reviews and approves complex design concepts.May lead a large-scale project or several small projects with complex features.Provide coaching and mentoring to the organization regarding qualification / validation procedures.Reviews engineering drawings, design documents and specifications for compliance to GMP/qualification principles and provides feedback to project team for noted deficiencies or improvements.Reviews qualification / validation packages for completeness and accuracy, compliance with policies, procedures and accurate data analysis.Perform additional duties as assignedQualificationsEducation: At minimum, must have a University degree (B. Applied Sc) or B. Engineering in Chemical Engineering.A minimum of 8 years of relevant experience in a GMP regulated environment desired. At least 5 years of qualification, validation required.Qualification / Validation and/or system experience in at least one of the following applicable areas:Manufacturing systems qualification with technical understanding and experience of automation platforms supporting these systems (SCADA, HMI, PLCs).Sterilization and aseptic process validationUtility and facilities qualification with experience of automation platforms supporting these systemsAutomated and manual cleaning validation processesAbility to effectively lead qualification projects, coordinate junior level personnel and drive results.Recognized as expert by peers and other personnel within the business. Knowledge of Industry guidelines (ISPE, PDA), US and international regulations (FDA, ICH, ISO, EU) for GMP regulated environments.Must be able to work independently and in a team environment, interacting with individuals at all levels in an organization and departmental areas.Ability to be flexible to address both shifting priorities and changes in approach in dynamic work environments.Must be able to solve routine problems without assistance.Complexity and Problem Solving Excellent analytical skills with systematic approaches to problem solving. Must be able to break down complex problems and tasks into manageable activities.Must possess basic knowledge of core principles in qualification / validation disciplines, as well as be experienced applying project management methodology. Knowledge of basic principles in various engineering disciplines. Internal and External Contacts Interaction with manufacturing, schedulers, maintenance and quality staff to secure equipment allocation in support of execution activities. Interaction with project managers for schedule adherenceDisplays general understanding of theories/practices of a variety of disciplines.Interfaces with customers on technical issues, project timeline, and qualification support.Actively participates on cross functional teams to determine the root cause and corrective actions for problems associated with investigations.Makes independent decisions within defined areas of responsibility.Able to multi-task under strict deadlinesStrong organizational skills, excellent writing and communications skills.Proficiency with Microsoft office including Word, Excel, and PowerPoint. Microsoft Project and Visio a plus.Bilingual in both French and English preferredNote: Position Title of Utilities Validation Engineer requires engineering designation.

You will be providing on-site, full-time commissioning and validation support to a multinational pharmaceutical company that also manufactures vaccines for global distribution.  Our client has offices in over 50 countries with operations in several states across the United States.  As Commissioning Engineer, you will be responsible for supporting the coordination, management and implementation of the commissioning and validation activities of a large, bulk vaccine manufacturing facility.  This position is based in Toronto, Ontario (Canada). Work with project team members to oversee and direct the entire commissioning process on all types and sizes of projects. Liaise with project stakeholders (Building Owners, Contractors, Architects, Engineers, and Management) on an ongoing basis. Apply company commissioning process guides as well as industry standards to ensure project quality delivery. Set and continually manage project expectations with project team members and other stakeholders. Perform design reviews and on-site commissioning of HVAC, plumbing, building automation systems, plant utilities, fire protection systems, HV and LV Power Distribution System, Emergency Generators Backup System, UPS system, Fire Alarm System, Security System and Communication Systems. Write, review and approve URS, SOP, and Commissioning test plans and qualification protocols. Validation of environmental rooms – walk-in coolers, walk-in incubators, walk-in freezers. Prepare and deliver various commissioning reports and documentation such as progress reports, functional test procedures, meeting minutes, checklists, issues logs, and specifications. Perform various inspections and functional tests. Perform system deficiency, identification and resolution analyses. Identify potential risks to project completion and develop potential solutions. Identify potential risks during commissioning and develop potential solutions. Plan, schedule, and track project timelines and milestones using appropriate tools. Other duties as assigned. A bachelor’s degree in engineering/science with 5 years of commissioning & qualification experience. A degree in Mechanical or Electrical Engineering is preferred. Experience working in pharmaceutical manufacturing environments would be an asset. Working knowledge of CSA Standards and Ontario Building Code is preferred. Familiarity with applicable Canada, US and worldwide regulatory requirements. Understanding of Validation using risk based approach (FMEA). Ability to read/interpret engineering drawings and design documents. Excellent technical and communication skills are a necessity. A self-motivated individual looking for advancement opportunities. Equal Opportunity/Affirmative Action Employer; M/F/D/V

Innovate to solve the world's most important challengesThe Senior HVAC Controls Engineer will design building control systems including DDC controller system by selecting the proper combination of hardware, software, equipment, materials, and services from the Honeywell product & applications portfolio that will deliver the highest value to the customer while supporting overall Honeywell business objectives.  Engineer hardware applications, as-built details, sequences, creating control drawings, valve sizing, control device selection, damper sizing, and schedules.  Communicate technical concepts/solutions to internal and external customers; e.g. conducting site walks, accurately reviewing customer specs, and with the ability to identify opportunities, risks, and resources required to achieve results within the proposal cycle.  Review job contract plans, scope and specifications, survey information, sales sketches, estimates and take-off sheets for opportunities and proposals. Clearly define requirements prior to starting engineering.  Prepare submittals per engineering standards, ensuring commitment dates are met.  Review submittals with sales and delivery teams and lead team to obtain hardware submittal approval.  Support Sales and Project Manager on surveys, application selection, layout of potential retrofit opportunities and assessing customers' business objectives and strategies. Professionally communicate in writing and verbally to account team, proposal team management and customers.  Work effectively and efficiently in a team environment. Work with Project Managers, Field Technicians, Solution Design Center and Field Engineers as needed to improve efficiency. Support the project team as needed during deployment. Prepare job drawings as required to meet deadlines. 80%  Create HVAC Control System Drawings 5%  Write software for DDC controllers 5%  Coordinate with the graphics design team 10%  Support technicians during commissioning YOU MUST HAVE Bachelor’s degree or College Diploma in Building Systems or other relevant education Experience using AutoCAD 3+ years HVAC control system design experience WE VALUE Bilingual in French and English Deep understanding of a variety of the field's standards and specifications Capability to work independently to follow guidelines and ensure production of high quality design documents Application of engineering techniques to optimize designs Ability to consistently make timely decisions even in the face of complexity or ambiguity Capability to clearly and concisely communicate with partners. Ability to influence cross-functional teams to deliver optimized design outcomes INCLUDES Continued Professional Development Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status.L'ingénieur en chef des contrôles CVC conçoit des systèmes de contrôle des bâtiments, y compris des systèmes de contrôle DDC, en sélectionnant la combinaison appropriée de matériel, de logiciel, d'équipement, de matériaux et de services à partir du portefeuille de produits et d'applications de Honeywell, qui offrira la valeur la plus élevée au client tout en soutenant les objectifs commerciaux globaux de Honeywell. Concevoir des applications matérielles, des détails conformes à l'exécution, des séquences, créer des plans de contrôle, dimensionner des vannes, sélectionner des dispositifs de contrôle, dimensionner des clapets et établir des calendriers. Communiquer des concepts/solutions techniques aux clients internes et externes, par exemple en effectuant des visites de sites, en examinant avec précision les spécifications du client et en étant capable d'identifier les opportunités, les risques et les ressources nécessaires pour obtenir des résultats dans le cadre du cycle de proposition. Examiner les plans du contrat de travail, la portée et les spécifications, les informations d'enquête, les croquis de vente, les estimations et les feuilles d'enlèvement pour les opportunités et les propositions. Définir clairement les exigences avant de commencer l'ingénierie. Préparer les soumissions conformément aux normes d'ingénierie, en veillant à ce que les dates d'engagement soient respectées. Examiner les soumissions avec les équipes de vente et de livraison et diriger l'équipe pour obtenir l'approbation de la soumission du matériel. Soutenir les ventes et le chef de projet lors des enquêtes, de la sélection des applications, de la présentation des possibilités de modernisation et de l'évaluation des objectifs et des stratégies commerciales des clients. Communiquer de manière professionnelle, par écrit et oralement, avec l'équipe chargée du compte, la direction de l'équipe chargée de la proposition et les clients. . Travailler de manière efficace et efficiente dans un environnement d'équipe. Travailler avec les chefs de projet, les techniciens de terrain, le centre de conception de solutions et les ingénieurs de terrain, si nécessaire, pour améliorer l'efficacité. Soutenir l'équipe de projet en cas de besoin pendant le déploiement. Préparer les plans de travail nécessaires pour respecter les délais.80% Créer des plans de systèmes de contrôle CVC5 % Écrire des logiciels pour les contrôleurs DDC5 % Coordination avec l'équipe de conception graphique10 % Soutenir les techniciens pendant la mise en serviceVOUS DEVEZ AVOIR - Baccalauréat ou diplôme d'études collégiales en systèmes de construction ou autre formation pertinente- Expérience de l'utilisation d'AutoCAD- 3 ans ou plus d'expérience en conception de systèmes de contrôle CVCNOUS VALORISONS - Bilingue en français et en anglais- Compréhension approfondie d'une variété de normes et de spécifications du domaine - Capacité à travailler de manière autonome pour suivre les directives et assurer la production de documents de conception de haute qualité - Application de techniques d'ingénierie pour optimiser les conceptions- Capacité à prendre des décisions en temps voulu, même en cas de complexité ou d'ambiguïté.- Capacité à communiquer de manière claire et concise avec les partenaires.- Capacité à influencer les équipes interfonctionnelles afin d'obtenir des résultats optimaux en matière de conception.INCLUT - Développement professionnel continuHoneywell est un employeur qui souscrit au principe de l'égalité des chances. Les candidats qualifiés seront pris en considération sans distinction d'âge, de race, de croyance, de couleur, d'origine nationale, d'ascendance, d'état civil, d'orientation affective ou sexuelle, d'identité ou d'expression de genre, de handicap, de nationalité, de sexe ou de statut d'ancien combattant.Additional InformationJOB ID: HRD221845Category: EngineeringLocation: 2100 52nd Avenue,Lachine,Quebec,H8T 2Y5,CanadaExempt