Overview of salaries statistics of the profession "Supervisory Mining Engineer in Canada"

Requisition ID: 346694 Position Number: 20061675 Posting End Date: Open Until Filled City: Winnipeg Site: Victoria General Hospital Department / Unit: Central Energy Plant Job Stream: Non-Clinical Union: CUPE-FS-WCHREO Anticipated Start Date: ASAP FTE: 1.00 Anticipated Shift: Days;Evenings;Nights;Weekends Daily Hours Worked: 12.00 Annual Base Hours: 2080 Salary: $40.036, $40.234, $40.415, $40.917 Grow your career in the Winnipeg Health Region! Our team provides a spectrum of health care services through an integrated network of sites, services and organizations. We’re united by a shared commitment to excellent and equitable health care. Position Overview To support Victoria Hospital’s Mission, Vision, and Values to be an excellent community hospital/facility. To provide care/services to all patients, residents, staff and community members with compassion and respect. To promote a culture of excellence through actions, behaviors and attitudes consistent with the Victoria Way. To demonstrate a commitment to the vision, values, goals, and objectives of the Unit, Victoria Hospital’s and WRHA. Main Function: In collaboration with the Facilities Support Service Lead and/or Manager, the Chief Power Engineer assists co-ordination of the operations of the Power House. Experience Experience with operation and maintenance of the Physical Plant, and other equipment such as boilers, refrigeration, HVAC, stationary engines, compressors, generators, pumps, motors, and other related equipment in all areas throughout the hospital. Experience in working with budgets and schedules. Previous supervisory experience is preferred. Education (Degree/Diploma/Certificate) Currently holds a valid 2nd Class Province of Manitoba Power Engineering Certificate in good standing (minimum of 5 yrs.). Certification/Licensure/Registration Currently holds a valid 2nd Class or higher Province of Manitoba Power Engineer’s Certificate. Qualifications and Skills Thorough knowledge of fired boilers, refrigeration, HVAC, and all related equipment in the Power house, mechanical floors, and elsewhere in the facility. A sound knowledge base of applicable safety and equipment operating regulations. Knowledge in reading blue prints. Ability to set and adjust priorities. Effective interpersonal and communication skills. Basic Computer skills. Demonstrated ability to work independently. Ability to effectively handle emergency situations. Ability to effectively communication, both orally and in writing. Demonstrates confidentiality in all hospital/patient/resident related matters. Physical Requirements Moderate to heavy lifting required. Good physical and mental health in order to meet the position demands. May be required to work extended hours. This position requires a current satisfactory Criminal Records Check (including Vulnerable Sector Search), Child Abuse Registry Check and Adult Abuse Registry Check as conditions of employment. The successful candidate will be responsible for any service charges incurred. A security check is considered current if it was obtained no more than six (6) months prior to the start of employment. Please note that an employee is not permitted to hold two or more positions across the WRHA legal entity that combine to equal more than 1.0 EFT. The WRHA legal entity includes Churchill Health Centre, Deer Lodge Centre, Grace Hospital, Middlechurch Home of Winnipeg, Pan Am Clinic, River Park Gardens, Victoria General Hospital, WRHA corporate programs, and WRHA community health services. Interviewed candidates may be called upon to participate in a skills assessment. Any application received after the closing time will not be included in the competition. We welcome applications from people with disabilities. Accommodations are available upon request during the assessment and selection process.

Closing Date: April 7, 2024 As Canada's largest diversified mining company, Teck is committed to providing the world with essential resources safely and sustainably. We have a rich history of consistently driving innovation, harnessing cutting-edge technology, and cultivating a dynamic environment that empowers our employees to shape the future.Teck is looking for an experienced Electrical Engineer to join our team at Trail Operations, one of the world's largest fully integrated zinc and lead smelting and refining complexes. Reporting to the Superintendent, Reactive Engineering, the Electrical Engineer (Reactive) is accountable for improving and sustaining the maintenance and reliability of Trail Operations' electrical infrastructure by investigating reliability problems, developing, and implementing maintenance strategies, and providing technical support.This role is based in the welcoming community of Trail, situated in the beautiful West Kootenay region of southeastern British Columbia. Here you will find outdoor adventure at your fingertips! Whether it's biking and skiing, or the laid-back atmosphere of fishing and hiking, there is something for everyone.This position offers relocation assistance, a compressed workweek with alternating Fridays off and a flexible work policy. Come experience what work life balance is all about!Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures Support immediate failures with troubleshooting and develop repair plans to reduce plant downtime Maintain the 600V to 63kV Electrical System and associated equipment within an engineering and trades team. This includes associated equipment with 24V control Communicate with all levels of the organization to identify issues and support solutions Provide verbal and written reports to keep management and work teams informed Initiate a Reliability Incident Report (RIR), Root Cause Analysis (RCA), or Bad Actor Situation Appraisal (SA) as required and makes recommendations on how to eliminate or reduce risks Use a combination of preventative maintenance (PM), predictive maintenance (PdM) and Condition Based Maintenance (CBM) for development of asset maintenance strategies Manages backlog of PM update requests and delegate minor PM revisions Define and track work quality requirements using Trail Operations' quality management process Manage design changes to equipment stemming from approved actions identified through failure investigations or assessments of chronic equipment Conduct equipment condition assessments and create corrective actions for repair Execute the equipment Management of Change (MOC) process for modifications to equipment design and conduct hazard risk assessments (HRAs) or process hazards assessments (PHAs) as part of the MOC Process Build commissioning plan as part of emergency repair scoping Support the procurement process for non-standard or specialty parts Provide guidance to new employees, co-op students, EITs, and plant personnel Qualifications: Bachelor's degree in electrical engineering or a related discipline 4+ years of work experience in mining, smelting, refining, or similar heavy industrial facilities Applicants must be eligible for registration or registered with the Association of Professional Engineers and Geoscientists of B.C. ("EGBC") as this will be a condition of employment. Teck will support eligible employees with their EGBC registration Strong communication skills and effective interpersonal and problem-solving abilities Field commissioning experience an asset Knowledge of reliability principles, methodologies and technology Technical knowledge in motor protection relays, feeder protection relays, VFDs, transformer protection Knowledge of crane controls required would be an asset Strong computer skills including MS Office (Advanced Excel) Supervisory and mentoring experience an asset Experience with predictive maintenance and CMMS systems technologies an asset Why Join Us? At Teck, we offer more than just a job - we provide a pathway to personal and professional enrichment. With captivating projects set against stunning backdrops, a culture of inclusivity and collaboration, and boundless opportunities to learn and grow, joining us means embracing a fulfilling and dynamic career adventure.Teck employees receive access to our total rewards program and comprehensive benefits package that promote physical, mental, financial, and emotional well-being. This includes but is not limited to: Annual Performance Bonus Profit Share Plan Health Spending Account Personal Spending Account Extended Health Care Dental and Vision Care Employer Paid Pension Plan Life Insurance and Disability Coverage Paid Sick Leave, Vacation and Holidays Virtual Telemedicine and additional support for overall well-being Employee and Family Assistance Program (EFAP) Salary Range: $101,000 - $125,000This role is eligible to hire up to a Senior level candidate.The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Please note this role does require the successful candidate to live within 100KM of Trail. British, Columbia. Relocation assistance will be offered however there is no camp or company housing. #LI-EL1 About Teck Teck is consistently recognized as a top employer for our commitment to a healthy and positive work environment. Our team is focused on fostering a workplace where everyone is included, valued and equipped for the future. In 2021, Teck was proud to be selected as one of Canada's Top 100 Employers for four years in a row, and also named as one of Canada's Top Employers for Young People. In 2020, Teck was named to Forbes World's Best Employers List and in 2021, we were recognized in Forbes Canada's Best Employers 2021 List. Teck is a diversified resource company committed to responsible mining and mineral development with major business units focused on copper, steelmaking coal, zinc and energy. Headquartered in Vancouver, Canada, its shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK. Learn more about Teck at www.teck.com or @TeckResources Job Segment: Electrical Engineering, Coal Mining, Electrical, Telemedicine, Engineering, Mining, Healthcare Apply now »

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: Safety First. Our number one core value. If we cant do it safely, we dont do it at all. Integrity. We lead by example, with humility and courage. Accountability. Were passionate about delivering on our commitments. Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being Believe in helping you build your career through our Aecon University and Leadership Programs Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. Are a leader in sustainable construction. With a strong commitment to operating responsibility by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our people. Were always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! What Is The Opportunity? Aecon Industrial is an industry leader in industrial construction and were looking for a new General, Foreperson to help us execute our projects! What You'll Do Here Responsible to ensure that all work is conducted in a safe manner in compliance with safety, quality and human performance policies. Utilize project master schedule to create detailed look ahead schedules for forecasting and planning. Assist in developing recovery strategies when project schedule or budget are in jeopardy. Plan and approve the work of own forces and subcontractors on the project including determining methods of construction, manpower levels, materials, tools & equipment, rentals and work schedules. Assume responsibility for the efficient use of materials and equipment and contractual performance of the project. Ensure trades personnel complete all necessary training in areas of safety, quality assurance, technical qualifications, equipment operation and owner specified requirements. Ensure project is constructed in compliance with drawings, specifications, Field Work Packages (FWPs), Inspection & Test Plans (ITPs) and project schedule and budget compliant. Interface with client representatives, design engineers, consultants, other contractors, etc. as required. Ensure the work is carried out in accordance with QA Programs and project quality guidelines. Maintain appropriate field documentation including safety records, daily progress reports, training records, T&E and rental records, manpower reports, owner support requests, FWP documents, etc Ensure project is constructed in compliance with drawings, specifications/codes and CITPs. Identify and support CITP and/or DCN revisions as necessary to support field work. Coordinate across all functions of the project as required to achieve task(s) goals. Provide leadership to Field supervisors, Coordinators and respective Craft Labor. Other duties as required. What You Will Bring to the Team Must possess Carpenters Certification of Qualification or equivalent combination of technical training and/or related experience. Minimum 5-10 years construction supervision experience. Experience with heavy civil formwork and concrete placement. Ability to successfully coordinate a construction project. Knowledge of all aspects of construction such as; technology, equipment, methods, trade agreements and jurisdiction, engineering, cost control, scheduling and safety requirements. Good communication, organizational and supervisory skills are essential. Basic knowledge of Microsoft Word, Excel and Outlook. Basic presentation skills. Basic blueprint understanding. Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the ACA and its applicable regulations. If you require accommodation under the ACA during any step of the application process please click here.

Position SummaryJoin Our Team at South Okanagan General Hospital in Oliver, BCAre you an experienced Maintenance Supervisor/Power Engineer 4 seeking a rewarding opportunity? We're looking for a dedicated individual to join our team at South Okanagan General Hospital in Oliver, BC.Your Role:As the Maintenance Supervisor/Power Engineer 4, you'll oversee ongoing Plant & Maintenance functions, supervise maintenance workers and designated staff, and perform related administrative functions. Your responsibilities include performing trades duties in various areas and operating and maintaining a power plant or low-pressure steam plant. This involves operating, repairing, and conducting preventative maintenance on boilers, air conditioning units, emergency power, and other related equipment in compliance with codes and regulations.This is a permanent full-time position, offering Monday to Friday day shifts from 07:00 to 15:00. You'll qualify for a comprehensive benefits package, providing added peace of mind.How We'll Help You Grow: Interior Health, Plant Services provides a tailored orientation for this position, offering support from within Plant Services and other divisions within Interior Health. We'll assist with ongoing education to keep you current in your field and the systems you need to maintain. Additionally, internal education through i-learns will further enhance your skills. Your ability to troubleshoot and repair all systems will grow as your exposure to various sites and systems expands.Why Join Us? Elevate Your Career with Interior HealthIf you're motivated to be professionally challenged and eager to maximize your skills, this is the move for you. We offer excellent benefits and opportunities for growth and development. Join our team at South Okanagan General Hospital and make a meaningful impact on healthcare infrastructure in Oliver, BC. Apply today and become part of our dedicated and supportive team.Qualfications• Grade 12 education plus five (5) years recent related experience including two years in a supervisory capacity or an equivalent combination of education, training, and experience.• Certificate of competency as 4th Class Power Engineer recognized by the Province of British Columbia. • Valid Class 5 BC Driver’s License.

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: Safety First. Our number one core value. If we cant do it safely, we dont do it at all. Integrity. We lead by example, with humility and courage. Accountability. Were passionate about delivering on our commitments. Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being. Believe in helping you build your career through our Aecon University and Leadership Programs. Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our people. Were always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! Position Overview The Steam Generator Replacement Team (SGRT) project is a fully integrated Joint Venture of Aecon, United and Framatome, located in Kincardine Ontario. SGRT is a part of the Major Component Replacement project and includes the removal of the steam generators at Unit 6, 3, and 4 and the installation of replacement steam generators with related plant modifications. This project is part of Bruce Powers Life Extension Program, which will allow Bruce Powers CANDU units to continue to operate safely through to 2064. In addition to the existing contracts for Unit 3 and Unit 4, SGRT has signed a long-term Preferred Supplier Agreement for steam generator replacements at the plants remaining units as part of the Bruce Major Component Replacement project. Under the general direction of the Boilermaker Superintendent, the Boilermaker General Foreperson will assist in the supervision, coordination, and scheduling of construction activities for their dedicated scope. What You Will Do Here Maintain excellent relationships with client, engineers, consultants, subcontractors and public. Responsible to ensure that all work is conducted in a safe manner in compliance with safety, quality, and human performance policies. Utilize project master schedule to create detailed look ahead schedules for forecasting and planning. Assist in developing recovery strategies when project schedule or budget are in jeopardy. Plan and approve the work of own forces and subcontractors on the project including determining methods of construction, manpower levels, materials, tools & equipment, rentals and work schedules. Assume responsibility for the efficient use of materials and equipment and contractual performance of the project. Ensure trades personnel complete all necessary training in areas of safety, quality assurance, technical qualifications, equipment operation and owner specified requirements. Ensure project is constructed in compliance with drawings, specifications, Field Work Packages (FWPs), Inspection & Test Plans (ITPs) and project schedule and budget. Interface with client representatives, design engineers, consultants, other contractors, etc. as required. Ensure the work is carried out in accordance with QA Programs and project quality guidelines. Maintain appropriate field documentation including safety records, daily progress reports, training records, T&E and rental records, manpower reports, owner support requests, FWP documents, etc. Participate in basic layout, preparation of work instructions, field engineering activities, etc. Oversee and directly support work during execution phase, including monitoring for performance, provision of guidance to the field team, reporting to line management, leading problem-solving efforts and development of adverse condition recovery plans. Ensure project is constructed in compliance with drawings, specifications/codes and CITPs. Identify and support CITP and/or DCN revisions as necessary to support field work. Ensure the work is carried out in accordance with QA Programs and project quality guidelines. Manage and maintain OPEX in the project database for future use. Attend and participate in the Plan of the Day and other meetings as required. Coordinate Foreperson and execution crew in the execution of their assigned duties. Coordinate across all functions of the project as required to achieve task(s) goals. Provide leadership to field supervisors, coordinators and respective craft labor. Other duties as required. What You Will Bring to the Team Must possess Boilermaker Certification of Qualification or equivalent combination of technical training and/or related experience. Minimum 5-10 years construction supervision experience. Ability to successfully coordinate a construction project. Knowledge of all aspects of construction such as technology, equipment, methods, trade agreements and jurisdiction, engineering, cost control, scheduling and safety requirements. Good communication, organizational and supervisory skills are essential. Basic knowledge of Microsoft Word, Excel and Outlook. Basic presentation skills. Basic blueprint understanding. Nuclear experience an asset, including vault work. Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the ACA and its applicable regulations. If you require accommodation under the ACA during any step of the application process please click here.

Posting Title LSO OTHR 3 - Land and Resource Specialist Position Classification Licensed Sc Off Other 3 Union PEA Work Options Hybrid Location Fort St James, BC V0J 1P0 CAMackenzie, BC V0J 2C0 CAMultiple Locations, BC CA (Primary)Prince George, BC V2N4P7 CAVanderhoof, BC V0J 3A0 CASalary Range $75,454.69 - $96,020.36 annually Close Date 4/2/2024 Job Type Regular Full Time Temporary End Date Ministry/Organization BC Public Service -> Ministry of Forests Ministry Branch / Division Strategic Initiatives and Forest Landscape Planning Job Summary Influence and engage in complex natural resource management issuesThe Ministry of Forests is responsible for the stewardship of provincial Crown land and ensures the sustainable management of forest, wildlife, water and other land-based resources. The Ministry manages these resources in a manner that embraces economic, environmental and social goals of government.The primary focus of this Licensed Land and Resource Specialist is to develop strategic and creative management solutions to complex natural resource management issues, which involve multiple stakeholders and First Nations. This position bridges environmental, social and economic disciplines of natural resource management to advance policy, Ministry priorities and strategies, and operational delivery of stewardship outcomes. In this role, you will lead a diverse project team of multidisciplinary specialists across multiple agencies, responsible for the management, coordination and delivery of strategic initiatives from initiation through to conclusion.This is a great opportunity to work in a collaborative, energetic team environment and to gain valuable experience with diverse land-based ecosystems. If you are ready for the next step in your natural resource career, we encourage your application.Job Requirements: Registered, or immediately eligible for registration, as a fully licensed professional with the British Columbia professional association as required by the specialty area (i.e. Forest Professionals BC, BC Institute of Agrologists, Engineers and Geoscientists BC). Note: immediately eligible for registration is defined as being able to transfer a current membership from an applicable jurisdiction to the BC association within six (6) months of employment. Confirmation of registration/eligibility is required before an offer of employment can be made. A Bachelor's Degree in a natural resource management related field (e.g., Forestry, Geography, or Natural Resource Management) or an equivalent combination of education/training, plus, three (3) or more years' experience working in a natural resource discipline. Formal training in project management or an equivalent combination of related training and experience. Significant experience managing multiple projects or leading a component (e.g., sub-project) of a major project or regional initiative. Experience in managing project teams. Experience working in natural resource management. Experience managing relationships with senior level partners and stakeholders. Experience or knowledge in implementing provincial and regional First Nations' consultation procedures. Experience or knowledge of conflict and dispute resolution principles and practices. Valid BC driver's licence. For questions regarding this position, please contact [email protected] .About this Position: There is currently one (1) permanent, full time position available. This position can be based in any of the following Ministry of Forests' offices: Fort St James, Mackenzie, Prince George, or Vanderhoof. Depending on the successful candidate's location, a bi-weekly isolation allowance may apply. Flexible work options are available; this position may be able to work up to two (2) days at home per week subject to an approved Telework Agreement. Employees of the BC Public Service must be located in BC at the time of employment. An eligibility list may be established to fill future temporary and permanent vacancies. This position is also posted as a Scientific Technical Officer (Resource) 27 via Requisition 110671 . Applicants who do not fully meet the required qualifications may be considered for this position, but at a lower classification.Working for the BC Public Service: The BC Public Service is committed to creating a diverse workplace to represent the population we serve and to better meet the needs of our citizens. Consider joining our team and being part of an innovative, inclusive and rewarding workplace.The Indigenous Applicant Advisory Service is available to applicants who self-identify as Indigenous (First Nations (status or non-status), Métis, or Inuit) seeking work or already employed in the BC Public Service. For guidance on applying and interviewing, please contact [email protected] or 778-405-3452.The BC Public Service is an award winning employer and offers employees competitive benefits , great learning opportunities and a chance to engage in rewarding work with exciting career development options. On top of the base salary, regular, full time Professional Employee Association members are also entitled to an allowance to cover professional fees, a 7% allowance in Lieu of Overtime Shiftwork and Standby (taken as time or money), and start off with 4 weeks of annual paid vacation. For more information, visit What the BC Public Service Offers .How to Apply: Your application must clearly demonstrate how you meet the job requirements listed above.Professional Designation: YES - Please include your registration number in your application. You must be registered, or immediately eligible for registration, as a Professional Forester with Forest Professionals BC; OR, a Professional Agrologist with the British Columbia Institute of Agrologists; OR, a Professional Engineer/Geoscientist with Engineers and Geoscientists BC. Note: immediately eligible for registration is defined as being able to transfer a current membership from an applicable jurisdiction to the BC association within six (6) months of employment. Confirmation of registration/eligibility will be required before an offer of employment can be made. If you do not meet this requirement, apply to the Scientific Technical Officer (Resource) 27 opportunity via Requisition 110671 .Cover Letter: NO - Please do not submit a cover letter as it will not be reviewed.Resume: YES - A resume is required as part of your application; however, it may not be used for initial shortlisting purposes.Questionnaire: YES - You will need to complete a comprehensive questionnaire to demonstrate how you meet the job requirements. Include all relevant information about your educational accomplishments and employment history including job titles, start and end dates (month and year) of your employment, and how you obtained your relevant experience. The questionnaire will take approximately 60 minutes to complete.Helpful tips, videos and more regarding the application process can be found on the Your Job Application page of MyHR. If you are experiencing technical difficulty applying, e-mail [email protected] , before the stated closing time, and we will respond as soon as possible.Additional Information: A Criminal Record Check (CRC) will be required.Applicants selected to move forward in the hiring process may be assessed on the Knowledge, Skills, Abilities and Competencies as outlined in the attached Job Profile located at the bottom of the posting.Applications will be accepted until 11:00 pm Pacific Time on the closing date of the competition.Job Category Leadership and Management, Natural Resource Sector, Policy, Research and Economics, Scientific and Technical

1. General Description of Responsibilities1.1. Working mainly independently for clients at locations remote from the managing office, supervising ship loading and discharging operations at a terminal to provide pollution prevention, cargo expediting and safety advisory services, ensuring that such operations are carried out in compliance with the Intertek quality system, best industry practices, applicable law, and client requirements.2. Specific Responsibilities2.1. Monitoring client ship(s) to promote safe and pollution free operation while minimising port time by improving operational efficiency. 2.2. Ensuring that all ship-board personnel involved in any supervised operations are fully aware of their role in, and the requirements of, such operations.2.3. Ensuring effective ship to shore communication channels are established and maintained throughout any supervised operation.2.4. Supervising mooring and unmooring operations and, where applicable, the ship's anchoring arrangements and ensuring the ship's arrangements comply at all times with applicable law and terminal procedures.2.5. Ensuring safe access to and from the ship by verifying that gangway and safety net arrangements are properly rigged and maintained throughout the ship's stay at the terminal.2.6. Ensuring that all voyage orders are understood and observed and that the ship is familiar with and complies with applicable law, terminal regulations, and client policies;2.7. Attending all Key Meetings on board and ashore with ship officers, shore personnel and cargo inspectors and confirming that all instructions are understood and applied.2.8. Carrying out ship safety inspections, and completing documentation, including ship and shore checklists as may be required by terminal personnel or the client.2.9. Ensuring all cargo transfer operations are in accordance with transfer plans, are safe and that the cargo transfer arm, hoses, manifolds, and dock lines are suitable for the operation.2.10. Conducting regular rounds on terminal and ship to ensure all operations are conducted safely and to prevent air, noise, and water pollution.2.11. Ensuring the safe transfer of responsibility for marine supervision to the relieving PSA at the change of shift after ensuring that the relief PSA has been provided with all requisite information, and is fully aware of the status of the transfer operation.2.12. Ensuring that all documentation requested by a client or by Intertek is completed and delivered.2.13. Issuing to and accepting from, for receipt only, notes of protest concerning ship operations or documentation and promptly providing a copy of any such notes of protest to the client.2.14. Participating in and/or providing information to review meetings with other PSA's and/or the client(s).2.15. If requested, representing the client in the event of accidents or mishaps.2.16. Other duties related to the above, as assigned2.17. Carrying out all responsibilities in a supportive manner with total adherence to: the Company's Health, Safety and Environmental Policies and Procedures, Quality Management System, Compliance and Ethics Policies, Vision, Mission and Strategy, and exercises good judgment, common sense, and diplomacy.3. Supervision Exercised3.1. The position of PSA carries no direct personnel responsibility or authority.3.2. Where two or more PSAs are on a job, the PSA designated as lead PSA has supervisory responsibility and authority.3.3. The PSA has supervisory responsibility and authority in the training of less experienced employees.4. Supervision Received4.1. The PSA will report to the Dispatcher or Coordinator of the local office. The Branch Manager determines the specific reporting line for a PSA. Regardless of reporting lines, the PSA will cooperate fully with all Branch, Area, and Regional departments in dealing with the assigned responsibilities.5. Education and Experience Requirements5.1. At a minimum PSAs shall have a full understanding of tanker operations and5.2. Shall hold or shall have held the Canadian maritime document or equivalent certificate of competency permitting the holder to serve in the rank of at least chief officer or first engineer on board ships of unlimited tonnage, and5.3. Shall have so served within no more than 10 years prior to being hired and/or5.3.1. Is currently accredited under the SIRE or CDI programs,5.3.2. Holds auditor status with the TMSA program,5.3.3. Gas been a marine surveyor with governmental authorities or a surveyor with a classification society5.3.4. Actively engaged in a marine consultancy business providing similar services to oil, mining or shipping companies or port authorities or governmental bodies, has served as a marine or engineering superintendent for an oil, mining or shipping company.6. Core Competencies6.1. Observant and detail orientated - much of the PSA work is inspecting ships and terminals to ascertain if they are suitable or performing correctly, it is important that the PSA not miss any detail that could be important to the safety or efficiency of the operation.6.2. Thorough and persistent - The checklists that must be completed for the quality system have many elements, the PSA has to work through them all and strive to obtain all the information required.6.3. Able to write clear and concise reports - much of the information is technical but is being read by busy non technical clients, the PSA must be able to write reports that communicate the information clearly and economically.6.4. Diplomatic - the PSA must act as an intermediary between terminal and ship personnel, it's important that the PSA can obtain the information required or influence the outcome of the operation while maintaining positive relations with all personnel involved.7. Value Added Competencies7.1. Presentation skills - meetings with clients may require PSA's to deliver results from past operations.Why work at Intertek? Intertek is a world leader in the $250 billion Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. At Intertek, we exercise our spirit of innovation, the passion of our people and our unmatched customer commitment to realize our purpose of making the world an ever better, safer, and more sustainable place for all. Learn more about Our History and What We Do . What we have to offer: Intertek believes that Our People are our strongest tool for success. We are an Equal Opportunity Employer and do not discriminate against applicants due to veteran status or on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, or gender identity. Please apply online at Intertek Canada Careers (oraclecloud.com) This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties.

Closing Date: April 23, 2024 Reporting to the Processing Operations General Supervisor, the Planner, Processing is responsible for daily and monthly production accounting, processing cost tracking, budgeting, and project and contractor management for the Plant Operations Department.To be successful, we are looking for someone with excellent communication, human relation, and follow-up skills, who can effectively find opportunities and assist the processing department with getting tasks completed. Most importantly, you must be a self motivate, team player with strong organizing, planning, and resourcing abilities.Located in the breathtaking Elk Valley of British Columbia. Here you will find outdoor adventure at your fingertips. Whether it's biking and skiing, or the laid-back atmosphere of fishing and hiking, there is something for everyone! Working a compressed work week with alternating Fridays off, come experience what work life balance is all about!Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures Manage production accounting such as inventory management and train accounting Develop plant cost forecast and manage accruals Assist in the development of the annual processing budget Coordinate the short- and long-range capital and major expense plans Manage miscellaneous small and medium scope projects for the processing department Plan and coordinate plant operations contractors, including contract management and supervision duties and support Conduct railway inspections and associated reporting Support Plant Maintenance and Plant Engineering Qualifications: High school diploma - a Valid Interprovincial Red Seal Certificate or post-secondary diploma in a related engineering or technical discipline is an asset Supervisory experience considered an asset, must be capable of obtaining a BC Mines Supervisor Certificate Knowledge and experience with materials acquisition, planning, or scheduling Excellent digital literacy, particularly in the Microsoft Office Suite; Excel, Word, and Outlook, along with experience in Microsoft Dynamics AX Knowledge and experience in the use of Plant Runs is an asset Previous Processing experience is an asset Benefits:Teck employees receive a competitive compensation package that includes, but is not limited to, base salary plus the following benefits: Two Annual Bonus Plans Comprehensive Benefits Plan Retirement Package Employee Share Purchase Plan Health Lifestyle Account Salary Range: $121,000 - $140,000The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Successful candidates must be willing to satisfy the pre-employment requirements of a pre-employment drug screen and three professional references.About TeckAt Teck, we value diversity. Our teams work collaboratively and respect each person's unique perspective and contribution.We wish to thank all applicants for their interest and effort in applying for the position; however, only candidates selected for interviews will be contacted.Teck is a diversified resource company committed to responsible mining and mineral development with major business units focused on copper, steelmaking coal and zinc.Teck has been named one of Canada's Top 100 Employers and is one of Canada's Top Employers for Young People .The pursuit of sustainability guides Teck's approach to business. Teck has been recognized as one of the Global 100 Most Sustainable Corporations by Corporate Knights and is ranked #1 in the Metals and Mining industry on the S&P Dow Jones Sustainability World Index (DJSI).Headquartered in Vancouver, Canada, its shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK.Learn more about Teck at www.teck.com or follow @TeckResources .Job Segment: Coal Mining, Contract Manager, Engineer, Equity, Mining, Legal, Engineering, Finance Apply now »

49429 - London - Regular - Hydro One is proud to be the largest electricity transmission and distribution provider in Ontario, serving nearly 1.4 million customers. We have a long history in the industry with our roots dating back over 110 years to 1906. Since then, we have worked to grow and evolve to meet the changing needs of our customers and communities across Ontario. Today, we’re focused on providing exceptional customer service and ensuring we are building safe communities where we live, work and play. It’s an exciting time to join the team at Hydro One! General Accountabilities: Prepare and design plans, schedules and work programs for various work groups in accordance with scheduling processes and work methods and procedures. Process and maintain records on work requests and assign priorities based on established criteria, as directed. Discuss special requirements with originator of the work request. Perform assessments and estimates. Identify and assemble appropriate documents necessary for a work package including work order information, procedures, switching orders, and other pertinent UWPC documents. Plan and schedule work programs and work orders for crews utilizing the current set of planning and scheduling tools including, scheduling software, Network Outage Management System, Network Management System and station drawings. Ensure outages are secured for work packages to meet the schedule requirements. Work with technicians to coordinate work programs and schedules of different work groups establishing a logical work sequence and appropriate resource allocation. Compare plans, schedules and work programs developed for past similar circumstances and check to substantiate logic of proposed plan, schedule or work program. Submit proposed plan, schedule or work program for supervisory review and approval. Interface with project management to ensure materials are ordered on schedule. Ensure materials are procured, tracked and secured, T&WE, Contracted Services and specialized equipment including test equipment are in place. This includes the order of material that is either direct shipped or warehouse resourced, the maintaining of local storages for free issue, and ensuring the re supply of these materials. Work with the: field supervisor, Services Specialist, Sr. P&C Engineer and other support staff to coordinate planning & scheduling services, as required. Refer issues of a controversial nature to the supervisor for resolution. Develop and monitor progress of plans, schedules and work programs through feedback and discussion with staff, as well as, through participation in planning meetings and through computerized work management systems. Identify scheduling problems, such as under-use of resources and inform Scheduler. Make recommendations as required, to change and improve the planning process. Review status of work request. Update the status of scheduled work that has been completed in a timely manner. Analyze and present data on group accomplishments and work load forecasts. Prepare status reports, as required, such as completed or outstanding work packages, using computerized and manual systems. Operation of a Forklift is a requirement May require occasional travel with overnight stays. Job involves approximately 80% office work and 20% field work in a TS environment. Perform other duties as required. Selection Criteria: Requires knowledge of electronics, electrical theory, mechanics, instrumentation, heat and thermodynamics associated with rates and operating techniques, materials and equipment related to technical and planning work programs. Requires knowledge of mathematics necessary to perform calculations. Requires knowledge of computer technology in order to operate work and project management systems. This knowledge is considered to be normally acquired in an equivalent to a Grade XII education in a secondary school plus an Electrical Engineering Technician program or by having the equivalent level of education. Requires experience in a trade setting to understand department systems, operating work methods, maintenance procedures and to gain an appreciation of materials and equipment characteristics and to comprehend technical and planning work programs. Requires experience to understand the practical aspects of design, procurement (such as drawings, materials, equipment), deployment of working forces, schedule durations, logic and practices. Requires experience in work sequences to develop logical work packages. Requires experience in estimating, planning, organizing, scheduling of work to assist in the preparation of plans and work programs, analysis and presentation of data on group accomplishments and work load forecasts. Requires experience within Operating, Electrical Maintenance, P&C and Mechanical Maintenance to be familiar with technical work requirements in the field. Requires experience in the operation of computerized work management systems to prepare plans and schedules. Should be familiar with the interrelationship with other sections within the department and supporting departments. A period of eight years is considered necessary to gain this experience. Experience with SAP work management is a definite asset. Note: All applicants are requested to include any Electrical Technician credentials (i.e. college diploma) or equivalent experience in their application. At Hydro One we understand that the success and strength of our business rests with our people. When we develop their skills, we are investing in both their success and ours. To secure the best talent, we seek to create a workforce that reflects the diverse populations of the communities where we live and work and to create a culture based on safety, innovation and inclusiveness. We are honoured to be recognized by Forbes in its list of Canada’s Best Employers for 2024. Thank you for considering a career with Hydro One, we welcome applications from all qualified candidates. If you are having difficulty using our online application system and you need an accommodation due to a disability, please email [email protected] . Hydro One will provide reasonable accommodation for qualified individuals with disabilities in the job application process. Please note this email is only for accommodation requests. Resumes sent to this email address will not be considered. Deadline: April 29, 2024 In the event you are experiencing difficulties applying to this job please consult our help page here . Job Segment: Telecom, Telecommunications, Project Manager, Electrical Engineering, Testing, Technology, Engineering

Closing Date: April 30, 2024 As Canada's largest diversified mining company, Teck is committed to providing the world with essential resources safely and sustainably. We have a rich history of consistently driving innovation, harnessing cutting-edge technology, and cultivating a dynamic environment that empowers our employees to shape the future.Reporting to the General Supervisor, Mill Maintenance, the Supervisor, Mill Maintenance will be responsible for the oversight and supervision of daily mechanical maintenance tasks in the crushing, grinding, flotation, filtering/drying, and leaching areas of the milling complex. The successful candidate is responsible for ensuring safe work practices while promoting a culture of safety and providing a high level of leadership and motivation to crews of Millwrights, Welders and associated union trade groups. The successful candidate may be required to work shiftwork.To be successful we are looking for someone with excellent leadership, communication, and interpersonal skills, who can build relationships across multi-disciplinary teams. This role requires a self-motivated individual who is driven to produce results and strive for continuous improvement, while handling contending priorities in a fast-paced and dynamic environment. Advanced analytical, planning and scheduling, organization, problem-solving and decision-making abilities are vital.Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures; Develop and maintain a safe work environment through compliance with Teck's Health & Safety Program and the BC Mines Act; Lead and hold employees accountable in achieving maintenance goals and enhance employee work performance and productivity through coaching and feedback; Administer the collective agreement, safety and mine regulations and environmental regulations in a manner consistent with policies and procedures; Participate in industrial relations and safety investigations as required; Direct the troubleshooting of equipment failures to determine root cause and initiate appropriate remedial action Oversee quality maintenance and repair of mine equipment to improve availability and reliability for production; Execute daily and weekly work schedules to ensure work is completed on time and on budget through usage of Short Interval Controls (SIC); Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays; Assist with the development of the 14-day schedule and the long range plan by providing feedback to the Maintenance Planner; Ensure preventative maintenance compliance and that repair history is properly documented; Assist in sourcing and requisitioning maintenance supplies, equipment and services within budgeted guidelines; Work with the General Supervisor to determine need for overtime work and contractors based on maintenance load as well as supervision of contractors as assigned; Use Key Performance Indicators (KPIs) such as PM compliance, schedule compliance and break in work as tools to improve maintenance execution. Qualifications: Minimum 5 years of supervisory experience; Recognized trade qualification as a Millwright, Welder, Machinist, Pipefitter or qualifications as a Mechanical Engineer; Understanding of planning and scheduling principles and procedures; Computer literacy including Microsoft Office and working knowledge of a computerized maintenance management system; Must have Gr.12 or GED; Possess a valid driver's license. Why Join Us? At Teck, we offer more than just a job - we provide a pathway to personal and professional enrichment. With captivating projects set against stunning backdrops, a culture of inclusivity and collaboration, and boundless opportunities to learn and grow, joining us means embracing a fulfilling and dynamic career adventure.Enjoy a variety of recreational opportunities, such as hiking, skiing, fishing, and golf! The mine site is a 50-minute drive from Kamloops, B.C. which provides all of the comforts of city living. The mine site is also close to Merritt, Ashcroft, and Logan Lake, which all exude a small town community atmosphere.Teck employees receive access to our total rewards program and comprehensive benefits package that promote physical, mental, financial, and emotional well-being. This includes but is not limited to: • Annual Performance Bonus • Profit Share Plan • Health Spending Account • Personal Spending Account • Extended Health Care • Dental and Vision Care • Employer Paid Pension Plan • Life Insurance and Disability Coverage • Paid Sick Leave, Vacation and Holidays • Telemedicine through Maple Virtual Care • Employee and Family Assistance Program (EFAP) Salary Range: $105,000 - $129,000The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Job Segment: Employee Relations, Mechanical Engineer, Telemedicine, Equity, Manager, Human Resources, Engineering, Healthcare, Finance, Management Apply now »

Closing Date: April 26, 2024 As Canada's largest diversified mining company, Teck is committed to providing the world with essential resources safely and sustainably. We have a rich history of consistently driving innovation, harnessing cutting-edge technology, and cultivating a dynamic environment that empowers our employees to shape the future.Teck is looking for an experienced Superintendent, Process Optimization to join our team at our Trail Operations, one of the world's largest fully integrated zinc and lead smelting and refining complexes. Reporting to the Metallurgy Development Manager, the Superintendent, Process Optimization is responsible for assessing, prioritizing and executing solutions for metallurgical design constraints and cost improvement opportunities as well as establishing and monitoring compliance with the optimal feed blend to maximize margins.This role is based in the welcoming community of Trail, situated in the beautiful West Kootenay region of southeastern British Columbia. Here you will find outdoor adventure at your fingertips! Whether it's biking and skiing, or the laid-back atmosphere of fishing and hiking, there is something for everyone.This position offers relocation assistance and a compressed workweek with alternating Fridays off. Come experience what work life balance is all about!Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures Oversee metallurgical process optimization and provide design solutions and cost improvements for Trail Operations Define and deliver technical solutions (flowsheet modifications, new unit operations, etc.) to address metallurgical constraints and/or value optimization opportunities into Trail Flowsheet Provide preliminary financial analysis of optimization opportunities and recommendations Ensure any modifications to the Trail Flowsheet and/or Unit Processes are implemented without disruptions by assessing metallurgical readiness and defining the handover package Oversee and provide guidance on the optimal feed blend to maximize margins at Trail Operations Develop and continuously improve the model to optimize the blend composition that is aligned to the process design. Embed the optimal blend modelling into the annual feed plan business process Develop and continuously review the guidance to achieve and maintain the planned optimal blend. Monitor conformance to the blend guidance Ensure the blending infrastructure has a capacity to deliver the optimal blend in the most cost-effective way and recommend improvements Monitor the delivery of Engineering, Procurement and Construction (EPC) for metallurgical optimization projects to ensure the metallurgical process design is maintained Incorporate critical control management into process optimization projects and blend management activities to prevent and minimize probability of material unwanted events Lead and mentor a team of Engineers, EITs and Co-ops by managing day-to-day activities, providing strategic direction, driving performance and excellence, and organizing work to achieve a positive working environment Provide short and long-term performance and career development for employees Qualifications: Bachelor's Degree in Engineering with a specialization in Metallurgy, Process, Materials Science or a related discipline Applicants need to be eligible for registration or registered with the Association of Professional Engineers and Geoscientists of B.C. ("EGBC") as this will be a condition of employment. Teck will support eligible employees with their EGBC registration Minimum of 10 years' experience in a metallurgical or related industry Minimum of 3 years of supervisory experience required Knowledge of metals refining business processes, concepts, and terminology Significant, hands-on experience within a metal processing environment and engineering of pyrometallurgical and hydrometallurgical areas required Excellent interpersonal and communication skills with the demonstrated ability to influence others, build relationships and work with cross-functional teams Strong problem solving, organizational, prioritization and interpersonal skills Ability to provide leadership to a diverse team including union members Why Join Us? At Teck, we offer more than just a job - we provide a pathway to personal and professional enrichment. With captivating projects set against stunning backdrops, a culture of inclusivity and collaboration, and boundless opportunities to learn and grow, joining us means embracing a fulfilling and dynamic career adventure.Teck employees receive access to our total rewards program and comprehensive benefits package that promote physical, mental, financial, and emotional well-being. This includes but is not limited to: Annual Performance Bonus Profit Share Plan Health Spending Account Personal Spending Account Extended Health Care Dental and Vision Care Employer Paid Pension Plan Life Insurance and Disability Coverage Paid Sick Leave, Vacation and Holidays Virtual Telemedicine and additional support for overall well-being Employee and Family Assistance Program (EFAP) Salary Range: $130,000 - $160,000The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Please note this role requires the successful candidate to live within 100KM of Trail, British Columbia. Relocation assistance will be offered however there is no camp or company housing.About Teck Teck is consistently recognized as a top employer for our commitment to a healthy and positive work environment. Our team is focused on fostering a workplace where everyone is included, valued and equipped for the future. In 2021, Teck was proud to be selected as one of Canada's Top 100 Employers for four years in a row, and also named as one of Canada's Top Employers for Young People. In 2020, Teck was named to Forbes World's Best Employers List and in 2021, we were recognized in Forbes Canada's Best Employers 2021 List. Teck is a diversified resource company committed to responsible mining and mineral development with major business units focused on copper, steelmaking coal, zinc and energy. Headquartered in Vancouver, Canada, its shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK. Learn more about Teck at www.teck.com or @TeckResources Job Segment: Coal Mining, Construction, Materials Science, Telemedicine, Mining, Engineering, Science, Healthcare Apply now »

Closing Date: May 8, 2024 Are you an ambitious and proven Principal Tailings Engineer looking for a new challenge? Teck Coal is seeking an exceptional individual to join our team! This is a unique chance to create a significant impact in a forward-thinking company that is at the forefront of innovation.Reporting to the Manager, Tailings, the Principal Engineer, Tailings is responsible for the tailings and geotechnical engineering Regulatory and Best Practice stewardship of tailings and water retaining structures (TWRSs) across Teck's Coal Business Unit (BU) leading ultimately towards successful and sustainable closure. This position provides essential guidance and mentorship to Teck Coal's team of Tailings Engineers, Tailings Qualified Professionals, and Responsible Tailings Facility Engineers, providing manager-level leadership by conducting technical reviews, offering regulatory guidance and implementation, and developing best-practice procedures for stewardship of the Coal BU TWRS portfolio. Additionally, this role represents Teck Coal's TWRS team to senior business leaders, industry groups, and stakeholder engagement.To be successful, we are looking for someone with advanced analytical, problem solving, risk analysis, and decision-making abilities. As this position requires strong leadership and supervisory skills, a motivated self-starter who thrives in multitasking team-based environments is essential. Exceptional communication, organizational, and interpersonal skills, including experience in partner or community engagement are key in this role.This role offers the flexibility of remote work, with periodic on-site visits to ensure operational alignment. You'll actively engage in both site-based and corporate office meetings, as well as conduct site visits as required. Working a compressed work week with alternating Fridays off, come experience what work life balance is all about!Responsibilities: Be a courageous safety leader, adhere to and sponsor safety and environmental rules and procedures Define and thoroughly communicate the Coal BU's expectations for the Tailings Management System (TMS), emphasizing continual improvement to TWRS engineering teams, site management, and senior executives Identify and assist with development of options for value optimization and reduction of risk and consider alignments across the full value chain. Assist site and BU teams in implementation of such initiatives Plan, organize, develop, and maintain a tailings guidance and procedures library, aligned with corporate and global best practices as appropriate Provide direct support to Qualified Persons/Responsible Tailings Facility Engineers on quality and timing of governance, stewardship and risk oversight of TSF's and water retaining structures Provide review and endorsement support for annual and regulatory reports, submissions to senior leadership, communications with corporate, and TWRS-related public communications Provide guidance and input on work scopes and performance expectations for Engineers of Record and Consultants Lead alignment to regulatory requirements, HSEC Standards, GISTM, ICMM guidelines, and other relevant standards across the TWRS portfolio Review analysis and recommendations of TMS data as requested by the operation Develop, introduce, and maintain education, awareness, and reporting system for TWRS procedures, guidance, regulatory, and best practice awareness and competency Develop and maintain current tailings Best Practice, industry and regulatory awareness. Ensure the information is available to help inform business decisions Assist with any required public consultations, information sharing and engagement Coordinate with various Coal BU teams(e.g. permitting, environmental, sustainable development, research and development) to integrate TWRS systems, guidance, regulatory requirements and best practices into business processes Leada team of TWRS professionals Qualifications: Bachelor's degree in Civil, Mining, Geological, Geotechnical, Environmental Engineering, or in a related field. A postgraduate qualification (Masters/Doctoral Degree or equivalent) in a relevant technical field is desirable Registered or eligible for registration as a Professional Engineer with the Engineers and Geoscientists of British Columbia Significant geotechnical engineering experience (15+ years) in design, monitoring, performance analysis, reporting, and stewardship of tailings and/or water dams and structures with extensive practical experience Excellent understanding of national and provincial regulations and legal requirements, permitting and legislative processes, and a broad knowledge of mining policy and best practice guidelines from the CDA, MAC, ICMM, and Global Industry Standard on Tailings Management Advanced computer skills including proficiency in geotechnical modeling and design experience with TSF/dam inspections including DSR's and DSI's Preferably worked in a large matrix structured organization Benefits:Teck employees receive a competitive compensation package that includes, but is not limited to, base salary plus the following benefits: Two Annual Bonus Plans Comprehensive Benefits Plan Retirement Package Employee Share Purchase Plan Health Lifestyle Account Salary Range: $141000.0 - $175000.0The actual base salary offered is determined based on the successful candidate's relevant experience, skills, and competencies and considers internal equity.Successful candidates must be willing to satisfy the pre-employment requirements of a pre-employment drug screen and three professional references.About TeckAt Teck, we value diversity. Our teams work collaboratively and respect each person's unique perspective and contribution.We wish to thank all applicants for their interest and effort in applying for the position; however, only candidates selected for interviews will be contacted.Teck is a diversified resource company committed to responsible mining and mineral development with major business units focused on copper, steelmaking coal and zinc.Teck has been named one of Canada's Top 100 Employers and is one of Canada's Top Employers for Young People .The pursuit of sustainability guides Teck's approach to business. Teck has been recognized as one of the Global 100 Most Sustainable Corporations by Corporate Knights and is ranked #1 in the Metals and Mining industry on the S&P Dow Jones Sustainability World Index (DJSI).Headquartered in Vancouver, Canada, its shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK.Learn more about Teck at www.teck.com or follow @TeckResources .Job Segment: Coal Mining, Facilities, Geotechnical Engineering, Geology, Mining, Operations, Engineering Apply now »