Overview of salaries statistics of the profession "Industrial Designer in Canada"

Our client located in Barrie, Ontario is currently seeking Licensed Electricians. Payrate: $33.00 per hour Shift: Days ELECTRICIAN ESSENTIAL DUTIES AND RESPONSIBILITIES:Project/Job OperationUnderstand and apply standard library resourcesUnderstand scheduling and budget requirements, and apply personal management and organization skills to meet required time and material allowancesStudy drawings, manuals and specifications, then, applying all pertinent electrical codes, proceed to build systems as scheduledMark drawings to “as built” throughout the projectOnce wiring is complete power should be connected and general systems checks performed. General system checks to include, but not limited to, power circuit testing, motor rotation checks, safety circuit testing, I/O testing and switch adjustmentsReview machine concept and design with Electrical designer and project developerPrioritize and schedule multiple projects; time management with respect to all phases of a projectAssemble and coordinate multiple staff when larger projects require team effortsDocument and keep organized notes on Project statusKeep clean and organized workstationsResearch and develop application and use of products involved in a project. Research and Development records to be filed for future reference.Non-conformances throughout the project are to be recorded as per ISO policyAs per ISO policy, Project Requirements form is to be initialed once associated phase of a project is completeOccasional travel as required within North AmericaRelationship ManagementWork in conjunction with all Innovators in a respectful and inclusive mannerDevelop and maintain positive relationships with prospective and existing customers and suppliersHealth and Safety ResponsibilitiesWorkers have a general duty to protect their own health and safety and that of others around them. Workers must:Work in compliance to the Act and RegulationsUse or wear any equipment, protective devices or clothing required by the employerNot move or make ineffective any protective devices or clothing required by the employerReport to the employer or supervisor any known hazards or missing or defective equipment or protective devicesReport any known violation of the Act or regulations to the employer or supervisorPHYSICAL DEMANDS:This position requires frequent standing, walking, crouching, kneeling and bending. It requires occasional twisting or rotating, crawling, climbing and balancing. Working in the electrical department also requires constant cervical flexion, the chin to chest movement. Maximum lifting weight can reach about 75lbs, maximum carrying weight is about 50lbs and the maximum pushing and pulling weights can reach 150lbs. Frequent forward, at or above shoulder, and lateral reach with the dominant arm as well as frequent grasping and handling are necessary. Occasional use of fingers and pinching is required as well. Working in this position requires the ability to work alone and self-supervise. It also requires the ability to handle attention to detail, tight deadlines, responsibility and accountability as well as the ability to multi-task.Requirements EDUCATION REQUIREMENTS AND EXPERIENCE:Minimum OCOT Canadian Red Seal Certificate of Qualification 309A Construction and Maintenance ElectricianMinimum of 4 years’ experience in an Industrial or Commercial applicationMinimum Diploma from 2 year Electrical Engineering Technician (Co-op) Program or 3 year Electrical Engineering Technology (Co-op) ProgramWage based on experience and certificationsIf you have the skills and experience that we are looking for to be successful in this role please submit your resume to [email protected] or fax to 905-231-3860We are an equal opportunity employerwww.winterstaffing.com

QUÉBEC | ONTARIOThe civil - marine technician is a hybrid role which combines AutoCAD drafting tasks within the office settings with construction supervision services which will be executed in the field for various civil - marine projects in Quebec or Ontario. This is an opportunity which brings best of both worlds for people who would like to be settled in an office, while kept being assigned on short, mid-, or longer-term construction projects on site, at various locations in Quebec or Ontario. In this role, you will have the opportunity to contribute to the realization of a variety of projects in the Quebec province as well as in all of Canada for different types of maritime and port terminals (bulk, containers), different types of ports (commercial, industrial, fishing, pleasure, tourist) and other projects in the field of maritime engineering. We are looking to fill two positions - one based in Québec and another based in Ontario. The individual can be based in any city in Ontario or Québeec. Responsibilities: Perform AutoCAD 2D / Civil 3D drafting of WSP Ports Marine and Coastal Projects as part of larger drafting team. Creating base plans from topographic survey information Preparing design packages at varies stages including conceptional drawings, detailed design drawings and post construction drawings. Prepare material and quantity take offs at varies stages of design. Actively participate in the design and provide input to the design team throughout the design process. Act as field inspector on behalf of WSP in various civil - marine projects by taking on short-, medium- and longer-term assignments within Quebec. Reporting the WSP Project Manager, Ensure that construction work is performed in accordance with the contract plans and specifications. Monitoring the constructed product for quality assurance. Understanding and interpreting the requirements and details of the contract drawings and specifications. Understand and interpret the requirements and details of the contract drawings and specifications. Inspecting the work, materials, means, and methods used in construction. Employing measuring and testing techniques in assessing contract compliance. Identifying and acting on any site, contractual and regulatory infractions. Assisting with the administration of the construction contracts. Tracking and reporting on the status of inspection activities. Maintaining daily records of construction activity and progress. Qualifications: Civil Engineering diploma or degree from a recognized College or University. Certification as an Engineering Technologist is an asset; 5-10 years hands on experience in the design and construction of civil - maritime projects AutoCAD 2D / Civil 3D Drafting skills in civil - maritime design projects Site quality control and construction inspection experience in civil - maritime projects Must have a good understanding of the Occupational Health & Safety Act, and regulations for construction projects, as well as the safety policies and procedures applicable to the construction project. Must possess sound judgement; strong organizational, administrative, observational and problem solving skills; effective interpersonal, and oral and written communication skills; French Speaker, bilingual preferred Valid drivers license WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Title:Industrial designerJob TypesRegular jobTerms of Employment:Full Time, PermanentSalary:$36.90 Hourly, for 35.00 Hours per weekAnticipated Start Date (at the latest in 3 months):As soon as possibleLocation:1001 Buckingham DriveSherwood Park, ABT8H 0X5(1 vacancy)OverviewLanguagesEnglishEducationCollege/CEGEPExperience1 year to less than 2 yearsResponsibilitiesTasksConsult with client, engineers or production specialists to establish product requirements, Prepare manufacturing drawings, specifications and guidelines for production and construct prototype of design, Prepare design concepts, sketches or models for approval, Analyze the intended use of products and user preferencesAdditional informationWork conditions and physical capabilitiesWork under pressure, Tight deadlines, Attention to detailBenefitsHealth benefitsDental plan, Health care planEmployer: Nerval CorporationHow to applyBy emailBy mail1001 Buckingham DriveSherwood Park, ABT8H 0X5

WSP is currently seeking an Electrical Design Technologist to join our Electrical Buildings team, located at our Victoria office. WSP's electrical engineering team in Victoria engages in various projects in the commercial, industrial, healthcare, educational, light industrial and transportation sectors in BC and the Yukon. Reporting to an electrical Project Manager, this position will be responsible for preparing electrical designs and documentation including modelling, drafting and calculations, construction reviews and administration. A day in the life: You'll be using your expertise to design electrical systems for a wide variety of building types and locations throughout BC and the Yukon (having your PSPC Reliability clearance would be a huge asset!). You will be contributing to a design team of electrical engineers and technicians, focused on technical solutions, developing the electrical design, communicating with the client and other design professionals, and preparing project drawings and specifications. You will be working on the design of power distribution (normal and backup power), infrastructure, lighting, fire alarm, data and security systems for buildings in the health care and institutional/commercial sectors. You'll be developing the electrical building information model in collaboration with the architectural, structural and mechanical designers. You'll be ensuring the electrical design complies with the BC Building Code, the Canadian Electrical Code, and other codes as required. We'd love to hear from you if you have: Electrical Engineering Technology Diploma or Certificate. Eligibility for registration with ASTTBC. Up to 5 years of experience in electrical engineering consulting for buildings and infrastructure. Strong verbal and written communication skills and interpersonal skills A "can do" attitude, courteous communication, an organized approach to workplace tasks and responsibilities, attention to detail, ability to work independently and in a team environment Ability to participate in a team to deliver design submissions, often with demanding timelines Working knowledge of Microsoft Office, AutoDesk Revit and AutoCAD. Proficiency with AGI or ETAP is considered an asset. Understanding of building construction and building electrical systems. Responsibilities Understanding and practicing safe work procedures. Reporting directly to a Project Manager, working in a team environment. Taking responsibility for a variety of project assignments in various phases of project development and implementation. Communicating effectively with the design team, clients, design professionals, contractors and authorities having jurisdiction. Reliably and promptly responding and attending to clients' needs. Following established quality assurance and quality control processes. Understanding and adhering to project budgets and timelines. Preparing system calculations utilizing industry standard lighting analysis software. Preparing project drawings utilizing industry standard CAD and BIM software. Selecting equipment and preparing project specifications. Reviewing project construction progress and managing construction phase administrative tasks.CompensationExpected Salary (all locations): $ 53,900 - $ 91,700WSP Canada is providing the compensation range that the company in good faith believes it will pay for this position based on the successful applicant's education, experience, knowledge, skills, abilities in addition to the specific geographic location. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Lighting Specialist: Harvey 2586   We are currently looking for a motivated Lighting Specialist for our Electrical Projects team, based in Burnaby, BC.The Lighting Specialist will act as an internal lighting and lighting controls consultant, who will make recommendations on products, and installations.While we are leaders in electrical construction, we also specialize in a wide range of in-house technology solutions, including audio visual, building automation, healthcare systems, network systems, and security and life-safety.We work on projects for airports, shipping terminals, water treatment facilities, hospitals, universities, and shopping centers, and we deliver integrated electrical solutions for our industrial, commercial, institutional, and residential customers.Lighting Specialist Duties and Responsibilities:Recommend lighting levels and layouts for design-build and cost saving applications.Design, coordination, and re-design of lighting.Review of bills of materials ensure that all lighting and lighting controls have been correctly covered in our estimates and projects.Recommend the best ways to resolve on-site problems and supplier bill of material conflicts.Provide value engineering advice, negotiate prices with manufacturer's representatives, and wholesalers.Liaison with lighting manufacturers, manufacturer's representatives, and consultants.Compile and lighting cut sheets for proposalsReview lighting purchase orders and submittal packages.Lighting Specialist Experience and Skills:5 years plus of experience working as a manufacturer's representative, lighting designer or lighting quotations specialist for a wholesaler.Experience dealing with consultants and providing lighting design assistance.Familiarity and skill with lighting design software (Acuity Visual, DIA lux, and AGI)Ability to read construction drawings and blueprints.Ability to read and interpret project specifications.Courses/Education related to lighting design and lighting certifications, strong asset. This is a fulltime position.Salary is open depending on current working experience, $80,000 plus per year.Benefits package is available after 3 months with incentive plan and competitive benefits package.

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: Safety First. Our number one core value. If we cant do it safely, we dont do it at all. Integrity. We lead by example, with humility and courage. Accountability. Were passionate about delivering on our commitments. Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being Believe in helping you build your career through our Aecon University and Leadership Programs Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. Are a leader in sustainable construction. With a strong commitment to operating responsibility by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our people. Were always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! What is the opportunity? Bringing seamless solutions to key clients through operational excellence and reliability. With the ability to self-perform across our diverse business offering, and a strategic fabrication network, Aecon Industrial proactively and profitably manages projects across a diverse range of industrial business areas, Renewable Energy, Natural Gas Distribution, Oil and Gas, Water, Mining, Cogeneration Energy, Chemical and Process plant. Aecon is seeking a 3D Designer to join our Industrial business group. Reporting to the IDD Director this position is in Edmonton. This role is responsible for providing 3D design, delivery, and technical support for 3D multi-disciplinary design coordination in SMARTPLANT3D, supporting and specification of, civil structural, electrical and control system components. What You'll Do Here: Leading and developing for work groups and project teams for multiple 3D design work scopes, Providing 3D design work and technical support for process plant and mining projects across all design modelling disciplines in SMARTPLANT3D Responsible for the development of the 3D Model and 2D drawings while leading model design reviews with engineering teams and clients. Ability to work in and work with Smartplants various software applications Smartplant3d, Smartplant Review, Smartplant Electrical, Spoolgen etc. And Experience of working with Smartplant MDCs (Model Data Containers). Develop and implement advanced work packaging (AWP) as required by client contracts. Ability to be a working lead for a project team of designers forming a multidisciplinary team. Provide conceptual front-end design and, final IFC material take-offs from client provided and Aecon enhanced 3D models, to support estimating, procurement, fabrication, and site installation. Designing and drafting of Piping, Civil structural, EC&I, Process items and auxiliary components in 2D and 3D drawing environments, for design, fabrication, and construction. Ability to interpret, update and produce engineering design drawings PFDs, PIDs, SLDs, Isos. Ability to read, understand, and comment on manufacturer equipment drawings and specifications. Preparing and verifying designs with site and survey team, including creation of tie-in, and as built drawings Reviewing project documents for scope, presentation, and technical accuracy Providing project management skills including man-hour estimating, budget control and scheduling for the design team. Undertaking and supporting engineering management and supporting the integration of our onsite survey services and information into 3D models. (3D scanning technology) Ability to work efficiently and effectively when managing multiple projects. Who are you? Degree or Diploma in Engineering or Related Discipline We are looking for multi-discipline talent, priority areas are electrical and/or structural and/or piping design experience. 3-5 years experience in electrical or structural 3D Design Proven experience, knowledge, and high proficiency with SMARTPLANT3D, and AutoCAD 2D and design/drafting. CAD/PDMS/E3D Knowledge would be an asset. Experience and knowledge of Advanced Work Packaging, its management and implementation Sound understanding of design, engineering codes and technical standards, codes, guidelines, and engineering systems coordination. Site experience and excellent understanding of survey needs and 3D cloud point technology. Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the ACA and its applicable regulations. If you require accommodation under the ACA during any step of the application process please click here.

The Opportunity: WSP is seeking a Co-op Technologist Student to join our Land Development & Municipal Engineering department for the Summer 2024 Term. Reporting to the Manager, Land Development and Municipal Engineering - Saskatchewan, this position will be responsible for supporting field and office services for land development projects for residential, commercial and industrial subdivisions, municipal design, and related roadway projects. A day in the life: Assist with field surveying using GPS and Total Station; Assist with preparing reports; Undertake field reviews and complete reporting; Prepare and review drawings; and Site inspections and field work required; Travel may be required to specific project locations in the Province; and Other duties as assigned What you'll bring to WSP ... Enrolled in a diploma program (Civil Technology, GIS, or Environmental) program from an accredited post-secondaryinstitution; Have an interest in the design, contract administration and project management of municipal engineering and land development projects; Working knowledge of one or more of the following: AutoCAD, Civil 3D; and Great communication skills, both verbal and written. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Job SummaryWe are seeking Product Designers at all levels to join our growing team within RBCs Cash Management division. Our newly-formed Experience Design team employs user-centered design practices and methods to create extraordinary customer experiences which transform the market. You will be responsible for creating innovative digital experiences for a range of products serving our diverse customer base. The ideal candidate will have a proven record of driving innovation in a cross-functional organization to design and build the next-generation digital interfaces.Job DescriptionWhat is the opportunity? We are seeking Product Designers at all levels to join our growing team within RBCs Cash Management division. Our newly formed Experience Design team employs user-centered design practices and methods to create extraordinary customer experiences which transform the market. You will be responsible for creating innovative digital experiences for a range of products serving our diverse customer base. The ideal candidate will have a proven record of driving innovation in a cross-functional organization to design and build the next-generation digital interfaces. Please note: Toronto based role.What will you do? Collaborate closely across our cross-functional team to bring the voice of the customer to every conversation and ensure we are building the best products in the market.Independently produce, deliver, and validate high-quality end-to-end product(s), with a focus on ideating short-term design strategies and features with our product team Bring a high-performing product design skillset and the ability to leverage design thinking practices to build UI/ UX flows that balance strategic business goals with the needs of clients Understands the capabilities, strengths, and limitations of our technology stack to best align design and development to optimize efficiency, performance and user value Rationalize solutions and effectively communicate ideas and designs. Support and mentor junior designers through day-to-day design challenges .Collaborate with core team members to introduce new product features and create a better user experience based on user feedback Work within our Agile team structure and provide quality assurance on creative deliverables Ensure adherence to Accessibility guidelines while keeping Inclusivity top-of-mind What do you need to succeed?10+ years of product design experience; BA/BS degree in Design (e.g., Interaction, Graphic, Visual Communications, Product, Industrial Design) and including:Experience with a wide range of design and prototyping tools (Figma, Adobe Creative Suite, Principle). Desire to work through the entire UCD process using methods like sketching, storyboarding, diagramming, wireframing, prototyping, and user research Deep knowledge in 2-3 key areas: UX/Prototyping & Interaction Design, UI/Visual Design, Understanding Human Behavior, Business and Product Strategy, Design Thinking,Keen desire to gain in-depth knowledge of our customers and design complex financial services applications that are both intuitive and efficientThe knack to ask why? you believe in data-driven decisions that are strategically informed to drive meaningful solutions to user problems and opportunitiesA deep collaborative approach to solving challengesyou understand your gaps and work with others to move the product forward so everybody wins; support for continuous and iterative improvementyou are comfortable with feedback cycles that are openly communicative and generous within one-on-one and large team settingsBeing meticulous and detail-orientedyou advocate for beautiful visual design balanced with solid UX; an adaptive mindset that is able to navigate challenging or ambiguous problemPortfolio / Case Studies with recent work samplesNice-to-haves: Experience designing Native Apps and Responsive Web platformsFinancial Services product design experienceExperience integrating the Jobs-to-be-Done frameworkWhats in it for you?We are building something completely new in a dynamically changing industry grab this opportunity to leverage the significant resources of our business and brand to make change happen in the real world. In addition, we offer;A comprehensive Total Rewards Program including bonuses and flexible benefitsA dedicated manager who will support, coach, and work with you to develop an individual career growth planStrong support from our personable Leadership teamAbility to make a difference and lasting impactAn agile, collaborative, progressive, and high-performing teamJob SkillsAdditional Job DetailsAddress:RBC CENTRE, 155 WELLINGTON ST W:TORONTOCity:TORONTOCountry:CanadaWork hours/week:37.5Employment Type:Full timePlatform:Capital MarketsJob Type:RegularPay Type:SalariedPosted Date:2023-06-13Application Deadline:2024-04-30Inclusion and Equal Opportunity EmploymentAt RBC, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work. We are taking actions to tackle issues of inequity and systemic bias to support our diverse talent, clients and communities.We also strive to provide an accessible candidate experience for our prospective employees with different abilities. Please let us know if you need any accommodations during the recruitment process.Join our Talent CommunityStay in-the-know about great career opportunities at RBC. Sign up and get customized info on our latest jobs, career tips and Recruitment events that matter to you.Expand your limits and create a new future together at RBC. Find out how we use our passion and drive to enhance the well-being of our clients and communities at jobs.rbc.com.

The Opportunity:Join the trailblazing Electrical team at WSP where an electrifying opportunity waits for an Electrical Engineer with previous experience in Lighting design. Picture yourself at the forefront of innovation, collaborating with a dynamic team of Engineers and Designers who are redefining the future of lighting projects in the Buildings Sector.Why WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPWhat you can expect to do here: Electrical design of Lighting Systems, Lighting Control, Circuiting, Emergency Exit, Signage Lighting, and Artistic Lighting for transportation projects including but not limited to GO Metrolinx, TTC, YRT, CN, CP, GTAA, etc. Experienced with commercial, institutional, healthcare, heritage, educational and industrial projects on the above listed system design; Complete understanding of Electrical Engineering requirements for Building and Site design; Review and Lighting design for building permit and construction; Attend the coordination meetings for Lighting Design; Prepare and review AutoCAD, Revit 3D, BIM360 models for all electrical systems as mentioned above; Some knowledge of project management including: reporting, financials, and resourcing to help with Project Managers, Senior Lighting Designers, and Lighting ManagerWhat you'll bring to WSP: Minimum Bachelor's degree in Electrical Engineering and registered P.Eng. with PEO; 3-5 years' of direct experience with electrical design for Lighting systems in transportation, commercial, institutional, healthcare, heritage, educational and industrial projects; Perform power distribution for lighting, lighting control and zoning, control Sequence Of Operation (SOO), circuiting, emergency lighting, and art lighting; Ability to work independently to deliver comprehensive designs and meet the deadlines; Experience with utility companies, authorities having jurisdiction, applicable codes and standards such as OBC, IESNA, IEEE, CSA, NFPA, OESC, and ASHRAE; Thorough familiarity with software used in lighting such as AGi32; WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Reporting to the Digital Delivery Manager, Buildings this position will be responsible for managing and coordinating the production and delivery of BIM projects, as well as the development, publication, distribution and enforcement of company BIM standards. WSP's Buildings team engages in the design of transportation, healthcare, educational, commercial, residential, recreational and light industrial facilities, with a specialization in large and complex projects, sustainable developments, and projects utilizing Alternate Delivery methods including Public-Private Partnerships (P3). If you are keen to take on some of the most exciting projects and to be part of a winning international team; you will get to work and display your skill with colleagues on a local, national and international stage. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

WSP is currently seeking a Mechanical Team Lead to join our Resources team in Saskatoon, Saskatchewan. Reporting to the Mechanical Engineering Manager, this position will be required to lead and execute the mechanical engineering efforts for the growing Resources team as well as provide management and oversight to local Mechanical Engineering team in Saskatoon. As a Mechanical Engineer within the Resources team, you will work on both new construction and brownfield projects. The Resources team provides services to mining, industrial, manufacturing, institutional and government clients. You will apply your mechanical engineering design knowledge on project work from conceptual design and studies through to project completion. Effective communication, technical quality, cost-effectiveness, building and maintaining client relationships, and providing guidance to a team of engineers and designers are integral parts of this role. Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future. #WeAre WSP A day in the life: Take responsibility for ensuring that WSP Project procedures are utilized on all projects. Providing specialist guidance in the design and delivery of complex engineering projects within the Mechanical discipline Provide leadership to mechanical team to ensure effective team development and performance Complete feasibility studies and technical report writing. Support the planning, scheduling, cost control activities in the design as related to the Project Plan Responsible for reviewing and stamping drawings (as required), using experience in interpreting design codes and regulatory requirements. Establishing scope of work for each project or proposal Scheduling and expediting work of the mechanical department Supervising an engineering group involved in the conception, planning and development of engineering design, projects, processes, proposals, and estimates Guiding through to completion in accordance with the schedule and budget on assigned major project of high technical complexity Assisting in the negotiation of critical engineering issues Implementing, and maintaining existing and new design standards, guides, and procedures Assigning and reviewing work of subordinate design engineering staff Define scope and create WBS Verify scope with client and follow procedures to monitor and control changes on project Work with disciplines to understand the cost and schedule impact of changes Accountable for establishing basic design criteria for the project with the client; Advocate the usage of and confirm compliance with all of the client and corporate procedures Expected to work with all levels of the organization in a cohesive manner. What you'll bring to WSP: KEY COMPETENCIES Able to communicate, understand, express and apply basic technical, business or administrative concepts. Superior organizational and time-management skills; ability to meet deadlines. Decision and problem-solving ability. Proven ability to multi-task and efficiently respond to changing priorities. Accepts coaching, knowledge and support from more experienced staff. MEASURES OF SUCCESS Define and steward the commitment to Health and Safety on the projects Adhere to the defined Corporate objectives; brief and assist subordinates with understanding, and provide linked sub-objectives that have applicability to their work Meeting targets and deadlines Achievement of individual business objectives Seek out assistance and ask questions of company leaders and experts Lead by example and promote a positive environment rooted in communication, ownership and camaraderie Maintain an open-mind when receiving constructive feedback and apply recommendations towards self-improvement. Build and maintain WSP's brand/reputation both internally and externally. QUALIFICATIONS AND EXPERIENCE 10-20 years of experience in a consulting environment focused on Mining and/or Industrial clients People management/mentorship experience. Be fluent in the English language with excellent verbal and written communication skills with working knowledge of the Microsoft suite of programs, Member or eligible to be a member of APEGS as a professional engineer in Saskatchewan; Working knowledge of CSA standards, ANSI standards, ASME standards, and other applicable codes; Must be able to attend industrial sites and observe all applicable safety regulations; Project experience in mills, smelters, mines, industrial sites, infrastructure, refinery, ports, material handling, pulp and paper is beneficial; Experience with renewable energy systems a benefit; Must possess a valid driver's license; Must possess a team player attitude and be able to work in project team environment; Ability to communicate in French language is an asset. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

WSP is currently seeking a motivated individual for a junior Mechanical Designer to join our Mechanical Buildings group, located at our Vancouver office. RESPONSIBILITIES Demonstrated ability to work with senior staff in the development of drawing packages; Have experience in designing HVAC and Building Automation systems; Knowledge of plumbing and fire-protection systems; Analysis of the building's heating, ventilation, and cooling loads; Perform engineering calculations; Experience to have been focused on building projects. Desirable experience to include light industrial; commercial, institutional, health care and recreational buildings; Heavy industrial building experience desirable but not mandatory; Primarily in an office environment, with some field work during initial site investigation and follow-up with contractor installation; QUALIFICATIONS Mechanical Engineering Degree or Diploma from an accredited institution; Proven working knowledge with AutoCAD and Revit software; Demonstrated understanding of Plumbing, Fire Protection and HVAC layouts; Good working knowledge of MS Office, AutoCAD and Revit; A "can do" attitude with good initiative, attention to detail and strong organizational skills; Strong verbal and written communication and interpersonal skills required; Must have proven record of working collaboratively in a team environment; Previous Co-op experience in related field is an asset; LEED accreditation and Passive House Certification is an asset Compensation Expected Salary (all locations): $62,600 to $106,400 per year WSP Canada is providing the compensation range that the company in good faith believes it will pay for this position based on the successful applicant's education, experience, knowledge, skills, abilities in addition to the specific geographic location WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

We are currently looking for a Junior Structural Engineer to be part of our Resources Engineering group who will be working on heavy industrial and mining projects. You will apply your structural design knowledge on project work from conceptual design through completion. Technical quality, cost effectiveness, building and maintaining client relationships, and providing guidance to a team of designers are integral parts of this role.Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. Our Hybrid Work Policy - a combination of in-person and remote working, enables us to purposefully think of how we work, who we need to work with, and where the work should be done. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPA day in the life: Complete structural designs and calculations for buildings and industrial structures. Make technical decisions and take responsibility on technical matters. Design management with input from other senior engineers on technical decisions. Coordinate with various disciplines required for project implementation. Write and review technical reports, and construction specifications. Site investigation, inspection, and evaluate conditions of existing structures. Occasional travel to various client sites, attend project meetings and conduct field reviews. Other duties as assigned.What you'll bring to WSP: Registered with APEGS within the Province of Saskatchewan in Structural Engineering Have 1 to 4 years of relevant experience in the design of concrete and steel structures in Canada. Possess in depth or broad knowledge, skills and practices for industrial projects. Must possess a team player attitude and be able to work in a project team environment. Be fluent in the English language with excellent verbal and written communication skills with working knowledge of the Microsoft suite of programs, Have design experience of industrial structures in Canada, Ability to work and complete tasks independently, make decisions and take responsibility on technical matters. Work with minimal direction. Proficiency in application of Canadian Codes and Standards. Proficiency in structural design software S-Frame, Staad Pro, or SAP. Experience working with clients and contractors directly. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

WSP is currently seeking a Mechanical Plumbing Designer to join our Buildings - Mechanical department, located at our Vancouver, BC office. Reporting to the Director, Mechanical and Electrical Engineering, this position will be responsible for the plumbing design of a variety of institutional, light industrial, commercial, healthcare, and recreational buildings. RESPONSIBILITIES Develop design documents, plans, schematics, reports, and calculations in compliance with client standards, company standards, and applicable local code and regulation Provide technical support to the design team and Project Managers Provide knowledge of BC Plumbing Code Drafting of plumbing systems in Revit and AutoCAD On-site mechanical investigations, audits, and reviews as required Writing technical and field investigation reports Attend project design and construction meetings with clients and contractors. Review equipment shop drawings and carry out construction administrative tasks.QUALIFICATIONS Diploma from a technical university/college in mechanical technology or bachelor's degree in mechanical engineering Knowledge and experience of CSA Healthcare code is an asset Proven expertise using Revit and AutoCAD Knowledge of MS Office 365 software tools Self-motivated with strong verbal, written communication, and interpersonal skills Ability to work efficiently and effectively when managing multiple tasks Ability to interpret architectural, structural, and electrical drawings with minimum supervision Ability to work independently and in a multi-disciplinary team environment A \"can do\" attitude, able to work in a team environmentCompensationExpected Salary (all locations): $46,500 to $79,000WSP Canada is providing the compensation range that the company in good faith believes it will pay for this position based on the successful applicant's education, experience, knowledge, skills, abilities in addition to the specific geographic location. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

The Opportunity: At WSP, we're continuing to grow and develop our expertise in the Energy, Resources & Industrial sector in Alberta. We currently have a need for an Instrumentation Engineer to join our Energy & Process team in Calgary on a full time bases. Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey. We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future. #WeAre WSP A day in the life: Develop design criteria and standardized specifications Specify instrumentation (selection, technical data sheets, bid analysis and recommendations) Design and review engineering work packages, data sheets, installation details, client support Assist in the development of P&IDs by ensuring proper instrument symbology and control loop definition Sizing of control valves and flow devices Development of instrument installation details Assisting in development of engineering estimates and input into proposals Review and check calculations, design models and drawings and design documents prepared by others in the group and by material suppliers, as assigned Prepare bulk material quantity takeoffs and material requisitions for materials applicable to the discipline May develop work plans, budgets, and schedules for basic designer tasks based on input and direction from supervisor when assigned We'd love to hear from you if you have ... Bachelor's degree in electrical engineering or automated engineering or Technical Diploma in Industrial Instrumentation. Minimum 5 years experience in the Energy or Oil & Gas sector Knowledge of industrial control networks Extensive knowledge of instrumentation selection for various processes Strong knowledge of industrial processes in various industries Strong knowledge of control applications including control loop definitions and interlocking systems Registered as a professional engineer in the Province of Alberta is an asset Strong interpersonal skills combined with a positive, team-oriented attitude Excellent communication skills, both verbal and written WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

The Opportunity:WSP is currently seeking a Measurement and Verification Analyst to support Measurement and Verification (M&V) services nationwide and work with the existing team of analysts and project associates involved in M&V works. It includes the responsibility and authority to direct various parts of M&V process and service offering aligned with the Buildings Divisional goals.The successful applicant will participate and direct multiple simultaneous complex and challenging M&V This includes reviewing work prepared by the other team members, analysts and Project Associates they are assigned to for quality assurance. M&V analysts may be called upon to support business development presentations to clients from time-to-time if the project principal/Project Directors are unavailable or support is needed.As part of normal management responsibility, the M&V analysts will regularly review the whole book of business that they are working with to ensure that timelines and budgets are being met on average. They may also be asked to attend coordination meetings at the team level to help sort out unique and complex project budgets and timelines. Assistance will also be provided to Managers/Directors to manage Commissioning Energy Performance project work with maintaining and continuously improving quality of service and work. This could include helping to train and mentor other staff members and to improve our processes to make us better and faster at the work we do. Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPWhat you can expect to do here: Verify energy and water performance of buildings/industrial facilities and validate energy/water savings from energy conservation measures for new and existing facilities. Develop & implement IPMVP -Adherent Measurement & Verification (M&V) plans, scope and consulting fee/cost for RFPs/RFQs responses, engineering studies, incentive programs sponsored by various LDC/IESO, LEED requirement. Deliver Monitoring Based Commissioning tasks in cooperation with Commissioning team members. Review bid/contract packages for quality assurance to identify M&V requirements. Review design intent and savings calculations during engineering studies. Execute and coordinate M&V activities in coordination with Energy Analyst, Energy Engineer, Construction Manager, M&E designer and commissioning agents/engineers during all project stages to assist in designing and implementing a permanent M&V infrastructure for continuous monitoring of energy water performance of facilities. Review design documents, M&E specifications, construction submittals including shop drawings of metering system to confirm all systems are included meeting M&V requirements. Review, analyze, advise, perform and manage Energy Performance Analysis including data collection from various software tools, utility bill accounting, sub-metering data analysis for end-use accounting, HVAC monitoring & Control data analysis, GHG inventory, energy and water cost analysis. Conduct EPA Energy Star entry as needed. Conduct energy benchmarking work for portfolio of buildings. Conduct and/or witness on-site spot measurements and short term data collection during construction and post-retrofit periods. Conduct site visits during construction & post-occupancy/post-retrofit operation phase and prepare and present site visit reports. Prepare and present project progress discussions, savings performance results and M&V reports to client. Develop energy consumption baseline and adjustments. Analyze energy management control systems including operational function and trend data to verify proper function. Perform on-site trouble shooting and data logging to validate and correct project performance. Team with Local Service/Sales to improve customer support, increase contract retention and recapture cancelled customers. Forecast savings shortfall and coordinate mitigation activities. Maintain customer records. Resolve customer issues and avoid litigation through problem resolution and negotiation. Perform the assigned duties with minimal supervision, while working in a team problem-solving environment. This position will have diverse accountability for multiple customers at various locations.What you'll bring to WSP: Bachelor's Degree in Engineering or Environmental Sciences and 2+ years of HVAC &/or Building Controls experience, or, in lieu of a college degree, 2-year technical degree and 3+ years of similar experience. Basic understanding of IPMVP framework and M&V Guidelines Analytical and problem solving skills, with ability to provide sound and reliable judgment in business solutions. Basic project management skill, analytical skill and computer skill 1 year performing engineering and energy savings calculations. 1 year working with M&V protocols and guidelines (ex: FEMP and IPMVP). Experience working in Measurement & Verification (M&V) and/or Monitoring and Targeting (M&T) related tasks for large Performance Guarantee, P3 and Deep Retrofit projects. Experience working with various types of meters, metering system software, building management system software, energy dashboards Proficient in Microsoft Excel. Valid driver's license Certified Measurement & Verification Professional (CMVP) Knowledge of building load simulation software programs such as EE4, eQUEST (DOE2), IES, RETScreen for conducting basic energy model calibration work Effective influencing, communicating, and negotiating skills Experience with resource management, cash flows, conflict resolution, and contract management Ability to work collaboratively in a team environment. Strong organization and planning skills. And good succinct writing skills

The Opportunity:The Central and Atlantic Resources Team is seeking an Intermediate Process Engineer at one of our offices located in the GTA, preferably at Thornhill, ON. The successful candidate will be involved in a variety of industrial and manufacturing projects including but not limited to mining, minerals processing, steelmaking & processing, chemical plants, battery manufacturing, food and beverages, and clean/renewable energy. This position will provide you with experience on various phases from FEED to detailed engineering. Why choose WSP? We value and are committed to upholding a culture of inclusion and belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSPWhat you can expect to do here: Preparation of process-related drawings and documents including PFDs, P&IDs, other process schematics, datasheets, technical reports/specifications, equipment general arrangement; Perform engineering analysis/calculations, mass & energy balance, equipment, pressure safety/relief & control valves sizing conform to operational and regulatory standards; Provide quality review and seal project documents and drawings; Assistance with tendering packages, proposal development, and engineering estimates; Build and maintain client relationships and respond to client requests; Provide mentorship to junior colleagues/engineers; Provide project support and be adept at working with multiple concurrent projects while adhering to the project timeline and budget; Work collaboratively and effectively with other disciplines or WSP group members, equipment vendors or suppliers, clients and sub-contractors; Travel to various client sites, attend project meetings and conduct field reviews or site inspections for design verification/implementation while observing all applicable safety regulations and policies; Other duties as assigned. What you'll bring to WSP: Graduated from a Chemical, Mechanical or Industrial Engineering program with 7-10 years relevant working experience; Registered as P.Eng licence with Professional Engineer Ontario (PEO), other provinces/states a benefit; Be fluent in the English language both verbal and written, knowledge of French would be an asset; Possess strong analytical and technical problem-solving skills, capable in proactively addresses problems within scope of responsibility; Knowledge of specialized process software including Aspen HYSYS Ò , Aspen Plus Ò , AFT Software Products, METSIM Ò ; Working knowledge of the Microsoft suite of programs, Bluebeam; Knowledge of industry codes, standards and practices would be an asset; Excellent interpersonal and communication skills and capable of effectively interfacing with all levels of management, other designers, engineers, field and contract personnel is required; Proven record on both independent work and ability to work effectively within a team environment; Valid driver's licence. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.

Job SummaryJob DescriptionWHO ARE WE?Houseful is on an ambitious mission to help Canadians confidently own their home. We help consumers start their journey towards home ownership and navigate decisions with confidence. We provide digital experiences, education, a team of professionals, and the core products needed to become empowered to buy and own a home.WHAT IS THE OPPORTUNITY?Houseful is looking for an experienced design leader with a track record of building and shipping successful consumer digital products to fill the position of Director of Product Design. This person will have a direct reporting line to the chief product officer of Houseful, manage a team of product designers, and is ultimately responsible for customer experience across all modes of engagement with Houseful customers.The ideal candidate is comfortable contributing to product strategy at a high level, setting and executing towards a vision for customer experience, bringing together the collective creativity and solutioning power of stakeholders across the organisation, driving buy-in and alignment, and partnering with product management, engineering, and marketing to execute towards that vision and strategy. This person is also comfortable rolling up their sleeves, supporting Houseful with whatever is required whenever necessary. As the Houseful organization and services scale, this person will continue to advocate for the design team and support the growth of our design team members.WHAT WILL YOU DO?Be a key member of the Houseful product leadership team with a bias towards action, helping the business efficiently diagnose customer centric problem spaces, formulate strategies, and drive execution through the product development process.Collaborate with houseful product managers, engineers, marketing, and operations, to bring new product and service experiences to life and nurture them.Drive and maintain a cohesive and high quality customer experience across multiple products and services.Serve as a player-coach to continuously up-level designers and processes, including career management, all while driving experience vision, strategy and supporting execution.Nurture and advocate for a culture of customer centricity across the Houseful business.WHAT DO YOU NEED TO SUCCEED?Excellent communication skills; The ability to connect with technical and non-technical audiences and effectively communicate why and story tell.Overarching technical and hands on experience in both the Product Design and User Experience domains, including best practices and tools for startup cultures.A love of advocating for, coaching and developing the skills of your team, and an organised approach to their career development.Mastery of diagnostics of customer problems and how that drives solutioning and innovation of customer experiences. Examples of skills are leading design thinking exercises, journey mapping, service blueprints, commissioning and coordinating customer research, user testing, and using customer behaviour data to uncover user experience problems.Confident and proactive in driving and facilitating collaboration and relationship building.Healthy curiosity and a relentless and infectious pursuit of learningSelf motivation to continuously map competitive experiences and emerging best experience practices, tools, and processes.Comfortable moving quickly and with ambiguity, and the intuition to know when enough is known to take decisive action to move forward.An all in attitude and approach doing whatever it takes to make a product and business idea succeedMust Haves:7+ years of digital product design experience or a similar role3+ years in a senior leadership role contributing to product strategy and managing designers and creative team members2+ years in an agile, lean execution environmentDeep knowledge in at least 6 of the following areas of design: UX/Interaction Design, UI/Visual Design, Understanding Human Behaviour, Business and Product Strategy, Design Thinking, Accessibility and Inclusive Design, Strategic Thinking, Systems Thinking, UX Research, Analytics, Usability Testing, Prototyping, Storytelling, Information Design, Information Architecture, Design Systems, Growth DesignBA/BS degree in Design (e.g., HCI, Interaction, Graphic, Visual Communications, Product,Industrial Design) or a related field or equivalent experience Portfolio / Case Studies with recent work samplesNice-to-haves:Experience in proptech or fintechs or startups leading digital financial product developmentExperience with multimodal experiences that combine digital and human powered experiencesExperience with 2-sided marketplaces where consumers find service providers or products.Experience in creating digital experiences that connect customers with industry experts(e.g., Advisors, Customer Support) across various platformsExploratory work with new AI-driven tools that supplement or augment the work of designers, researchers, and/or developers.Exploratory work with AI driven customer experiencesWhats in it for you?We thrive on the challenge to be our best, progressive thinking to keep growing, and working together to deliver trusted advice to help our clients thrive and communities prosper. We care about each other, reaching our potential, making a difference to our communities, and achieving success that is mutual.A comprehensive Total Rewards Program including bonuses and flexible benefits, competitive compensation, commissions, and stock where applicableLeaders who support your development through coaching and managing opportunitiesAbility to make a difference and lasting impactWork in a dynamic, collaborative, progressive, and high-performing teamA world-class training program in financial servicesFlexible work/life balance optionsOpportunities to do challenging work#LI-hybrid#LI-POST#TechPJJob SkillsAdditional Job DetailsAddress:20 KING ST W:TORONTOCity:TORONTOCountry:CanadaWork hours/week:37.5Employment Type:Full timePlatform:Personal and Commercial BankingJob Type:RegularPay Type:SalariedPosted Date:2024-03-11Application Deadline:2024-05-14Inclusion and Equal Opportunity EmploymentAt RBC, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work. We are taking actions to tackle issues of inequity and systemic bias to support our diverse talent, clients and communities.We also strive to provide an accessible candidate experience for our prospective employees with different abilities. Please let us know if you need any accommodations during the recruitment process.Join our Talent CommunityStay in-the-know about great career opportunities at RBC. Sign up and get customized info on our latest jobs, career tips and Recruitment events that matter to you.Expand your limits and create a new future together at RBC. Find out how we use our passion and drive to enhance the well-being of our clients and communities at jobs.rbc.com.

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: Safety First. Our number one core value. If we cant do it safely, we dont do it at all. Integrity. We lead by example, with humility and courage. Accountability. Were passionate about delivering on our commitments. Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being. Believe in helping you build your career through our Aecon University and Leadership Programs. Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement driven by the diversity, expertise and teamwork of our people. Were always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! Reporting to the Project Manager, the Project Engineer will be a key member of the engineering team for building and leading EV infrastructure projects. We are looking for a Design Engineer who will help us with both EV fleet infrastructure site designs and advance our EV charging products, systems, and applications. On a daily basis, you will carry out various engineering tasks, such as performing calculations, converting field sketches into construction drawing packages, as well as research to ensure our systems meet the various standards. What You'll Do Here: Provide Engineering Design, review, and analysis of EV Charging infrastructure projects Manage engineering projects and deliver them on time, define customer needs and requirements Produce detailed CAD drawings for the electrical design, including Single Line Diagrams, electrical details, wiring diagrams, underground cable details, site layouts for EV charging stations, and other projects as required Coordinate with other discipline engineers, designers, and CAD staff as part of a multidisciplinary team Complete electrical calculations, cable schedules, demand load calculations, etc. Carry out site assessments and surveys, to determine project feasibility Prepare site assessment reports, cost estimates, material take-offs Submit applications for Utility, ESA, and City permits if required Ensure that installations and applications are in line with customer needs and safety standards Collaborate with engineers and technicians to design and apply new system processes Perform quality and performance analysis on new and legacy depots we installed or maintain Summarize data and report on test results Examine needs on new equipment, calculate costs and help prepare budgets Travel to project sites for product reliability evaluation and/or failure root cause analysis Travel to engineering/manufacturing facilities to review product design and manufacture, and to field sites to review installation, operation, and maintenance Manage stakeholder relationships to develop new business opportunities and promote complementary services What You Bring to the Team: Bachelors Degree in Electrical Engineering and 5+ years work experience in commercial and industrial sector, or equivalent Proficiency designing electrical & power distribution systems in AutoCAD or Revit, with Revit being preferred Experienced in coordinating with Utility for transformer/power upgrades and primary/secondary service infrastructure Perform electrical engineering study & breaker settings (EasyPower, SKM, ETAP), perform electrical lighting calculations (photometrics and comcheck) Must have experience in project management of engineering design projects. Licenses and/or Professional Accreditation Must hold a degree in Electrical Engineering from an accredited university. Ontario Professional Engineer (P.Eng. PEO) required. Engineering license in other provinces would be an asset. Drivers license. Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the ACA and its applicable regulations. If you require accommodation under the ACA during any step of the application process please click here.

The Opportunity:WSP is currently seeking a Process Designer to join our Energy, Resources and Industry (ERI) team located in Ontario. This position will be based in one of our GTA offices: Thornhill, Etobicoke, or Mississauga. Reporting to the Process Manager, this position will be responsible for producing drawings, models to support the design of a diverse range of Industrial and Manufacturing clients within the region. Why WSP? We value and are committed to upholding a culture of Inclusion and Belonging Our Flexible Work Policy - we recognize the importance of balance in our lives and encourage you to prioritize the balance in yours. We will support you on and off the job so you can be fully present in both your work and home lives. Our Hybrid Work Policy - a combination of in-person and remote working, enables us to purposefully think of how we work, who we need to work with, and where the work should be done. A Canadian success story - we're proud to wear the red and white of this beautiful country and show the world what Canada has to offer. Enhance the world around you - from the environment to the highways, to the buildings and the terrain, WSP is the fabric of Canada. Outstanding career opportunities - we're growing and pushing ourselves every day to be greater than yesterday - we're open to your ideas and trying new things. A phenomenal collaborative culture and a workforce filled with genuinely good people who are doing humbly important work. Come find out for yourself what it's like to be a part of our journey.We offer attractive pay, flexible work options, a great corporate culture, comprehensive and employee-focused benefits including virtual healthcare and a wellness platform as well as great savings programs, and a clear vision for the future.#WeAreWSP A day in the life:o Work closely with engineers to develop process discipline deliverables such as PFDs and P&IDs, with CAD software in accordance with company or client standards and specifications.o Experience in drafting mechanical or instrumentation discipline deliverables such as general arrangement/details drawings, plan/elevation view drawings, and instrumentation loop/wiring diagrams would be an asset.o Development of 2D or 3D CAD deliverables.o Conduct site visit or survey to collect information and data in supporting projects as needed.o Work collaboratively and effectively with other engineering/design departments.o Adhering to the project timelines and budget.o Review and incorporate vendor and in-house coordination information/drawings onto project deliverables.What you'll bring to WSP:o The successful candidate with 5 to 7 years of related experience shall be skilled in process systems related to industrial and manufacturing facilities.o Successfully completion of college or diploma in chemical or mechanical engineering design and drafting.o Excellent computer skills and proficiency with 2D & 3D CAD drafting/modeling programs including AutoCAD, CADWorx, AutoPlant, Hexagon, Bluebeam Revu, Microsoft suite of programs.o Proficiency in ANSI, ISA and ISO standards on P&ID symbology.o Must be able to attend industrial sites and observe all safety regulations.o Excellent organization skills, detail-oriented and highly motivated.o Ability to work independently and collaboratively.o Ability to effectively communicate both verbally and in writing.o Ability to handle stressful situations and strict deadlines.o Must possess a valid driver's licence. WSP is one of the world's leading professional services firms. Our purpose is to future proof our cities and environments. We have over 65,000 team members across the globe. In Canada, our 12,000+ people are involved in everything from environmental remediation to urban planning, from engineering iconic buildings to designing sustainable transportation networks, from finding new ways to extract essential resources to developing renewable power sources for the future. At WSP: We value our people and our reputation We are locally dedicated with international scale We are future focused and challenge the status quo We foster collaboration in everything we do We have an empowering culture and hold ourselves accountable Please Note:Health and Safety is a core paramount value of WSP. Given the importance of keeping one another safe it is expected that you comply with our Health, Safety & Environment (HSE) policy at all times as well as client HSE policies when working at client locations. Offers of employment for safety-sensitive positions involving fieldwork are contingent upon candidates being able to perform key physical tasks of the job as described in the job posting and interview. This may include the ability to work in a variety of environmental conditions, such as remote or isolated areas, working alone, and in inclement weather (within safe and reasonable limits). WSP welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process. WSP is committed to the principles of employment equity. Only the candidates selected will be contacted. WSP does not accept unsolicited resumes from agencies. For more information please READ THE FULL POLICY.