Overview of salaries statistics of the profession "Production Supervisor in "

Position Summary: Under the direction of the Hub Supervisor, this position is accountable for meeting and exceeding quality standards in a Hub production centre. The incumbent will manage jobs from order entry through to completion according to customer specifications. Accountable for maintaining productions area and equipment. Processes customer orders efficiently and accurately to maximize profitability and maintains internal customer satisfaction by providing high quality service. Primary Responsibilities: • Set up and produce single or multiple copies of printed or other machine-acceptable original material, using photocopy equipment with reduction, enlargement, collating and binding capabilities. • Execute all finishing services as required. • Proof jobs and evaluate output and make necessary changes to ensure job integrity before, during, and after each production run of a job. • Maintain colour quality control standards. • Colour copiers calibrated during each shift. • Read order instructions and understand steps required in the production workflow. • Respond appropriately to fault, error and alert messages and escalate to supervisor. • Record meter reads in Compass. • Provide a high level of customer service to store associates relating to order status, product and service inquiries and error recovery. • Collaborate with team members to ensure all orders are completed efficiently and accurately. • Responsible to deliver assigned jobs on time with a high level a accuracy. • Has a complete understanding of all company policies and procedures related to this position, as outlined in the training checklist. • Understands, proactively models and adheres to all privacy policies. • Understands and adheres to Staples' document handling and copyright policies. • Execute administrative requirements such as billing and quality control checklists. • Check and understand all sources of communication for information (white boards, bulletin boards, portal, etc). • Responsible for the safe and proper use of all store equipment and are required to inform management of any maintenance issues regarding the equipment. • Promotes and maintains a safe working environment and follows all company protocols for safety and is required to report any unsafe working conditions to a manager. • As per policy, required to have personal parcels (bags, totes, backpacks, purses, etc.) checked by a manager prior to leaving the store premises. • Ensures the general cleanliness of workstations, lunchroom and washrooms according to company standards is maintained. • Identifies and communicates suggestions for improvements in all areas of business. Basic: • Good technical proficiency with computers and Microsoft software applications would be an asset. • Comfort and knowledge working with print and finishing equipment would be an asset. • Ability to resolve clients concerns in a diplomatic manner. • Ability to engage clients in a friendly and professional manner. • Capacity to communicate with clients effectively using a variety of mediums. • Ability to work effectively with ongoing distractions is necessary. • Can engage appropriately and work as part of a team. • Capacity to work independently and seek out assistance as required. Preferred: Experience: • 1-2 Years in print production environment is preferred. Education: • Working towards or successful completion of high school is preferred. Additional Information: • Conditions of the work environment are such that minor stress and physical discomfort may occur. • This position will be based in a production centre environment and will require extended periods of standing. • You will be exposed to moderately disagreeable levels of noise generated by the operation of production equipment. Staples is an equal opportunity employer committed to diversity and inclusion and we encourage applications from all qualified candidates, including those with disabilities. We will accommodate applicants' needs, upon request, throughout all stages of the recruitment process. Please inform us of the accommodation(s) that you may require. Information received relating to accommodation will be addressed confidentially.

Our client located in Markham, Ontario is currently seeing a Machine Operator for their night shift Payrate: $16.00 per hour + shift premium8 month contractCANDIDATES WILL BE REQUIRED TO PASS A CRIMIINAL AND CREDIT BACKGROUND CHECKVarious Shifts Available:• Midnight Shift: Sunday – Thursday, 11:00 pm – 7:15 am $1.00 premium• Afternoon Shift: Monday – Friday 3:00 pm – 11:15 pm .60 premiumQualifications• High attention to detail• Strong manual dexterity• Ability to stand for duration of the shift• Be able to lift at least 20 lbs.• Ability to follow and comprehend detailed instructions• Ability to work independently and maintain consistency while performing basic repetitive tasks• Proven ability to work closely with other team members• Strong communication skills, written and verbal• Ability to multi-task effectively• Ability to work in a fast paced environment• Willingness to accept changing task assignments through the course of the same shift as instructed by Supervisor• Exhibits a positive and flexible work attitude• Comply with G+D Environmental, Health & Safety policies, procedures and report any Environmental, Health & Safety hazards, incidents and concerns to the immediate supervisor/manager. Management will ensure employees are provided with job specific Environmental, Health & Safety information, training and also ensure employees follow workplace Health & Safety policies and procedures.• High School Diploma preferredRequirements Working Conditions• Production Floor• Overtime may be required• Fast paced manufacturing environment• Smocks required on the production floor and Safety Shoes where applicableIf you have the skills and experience that we are looking for to be successful in this role please submit your resume to [email protected] or fax to 905-231-3860We are an equal opportunity employerwww.winterstaffing.com

Title: Tig WelderLocation: Richmond HillType: Contract to perm (First 3 months on our agency payroll) Payrate: TBDShift: days or afternoonsReporting to: Shop ForemanAboutOur client is recognized on the global market as a leading manufacturer of solid dosage processing equipment - They designs and fabricates a broad product line of pharmaceutical, nutraceutical and confectionery equipment for coating, mixing, blending, granulating and drying. Our product range provides proven solutions through all capacity requirements - from small scale portable laboratory and R&D models through to high-volume continuous systems. Position Mission: A welder-fitter will be required to perform basic to medium complex tig welding, installation and repair of stainless-steel sheet metal products Mandate and Roles: Major ResponsibilitiesTig weld, install and repair sheet metal products according to drawings, product specifications and with guidance from a sheet metal mechanic fabricatorOperate manual welding equipment to join materialsInspect parts, products for conformance to specification using appropriate measuring equipment and make corrections as requiredRead, understand and work according to company policies and procedures and supervisor’s instructionsFabricate sheet metal products using shear, saw, drill and various other manual/power toolsFasten parts, seams, joints together with bolts, rivets, caulks metal drive clips and bondsTrim, file, grind, deburr, buff and smooth surfaces, seams and joints of assembled parts, using hand tools and portable power toolsFabricate jigs/fixtures to enhance work performancePerform daily safety checks and maintain equipment in good working orderMaintain good housekeeping practices within the work area and return all unused parts to inventoryIdentify material with job numberMaintain good material handling and storage practicesOn daily basis, record hours worked against project work numberWork in a manner which meets production schedules and budgetsWear safety equipment and work in a safe manner at all timesPerform and complete all inspections / testing and documentationPerform other duties as and when required

Our client located in Markham, Ontario is currently seeing a Machine Operator for their afternoon shift CANDIDATES WILL BE REQUIRED TO PASS A CRIMIINAL AND CREDIT BACKGROUND CHECKSHIFT: 3 pm to 11:15 pm Monday to FridayPayrate: $17.00 per hour + .60 shift premium8 month contract Primary ResponsibilitiesFollow a detailed schedule to retrieve correct orders and outputFold the output following job specificationsEnsure VIP’s take priorityQuality Control checking to ensure jobs are correct, in right sequential order and balancedEnsure all blanks and headers are pulled from jobsResponsible to fill out color coded tags as requiredResponsible for machine setup, minor adjustments and clean machinesSign and scan out jobs and notifying Traffic when completeEscalate to lead as required on quality or production issuesFill out daily work sheets with correct totalsAdhere all Health and Safety, Environment and Security policies and proceduresSecondary ResponsibilitiesPlacing service calls and filling out service call sheets when neededKeep work area neat and clean, emptying garbage at end of each shiftAssist in other production related duties as assignedCross train in other job functions as assignedAttend DP Communication meetingsComply with G&D Environmental, Health & Safety policies, procedures and report any Environmental, Health & Safety hazards, incidents and concerns to the immediate supervisorRequirements Work Experience:Experience in operating MBO folders an assetExperience in working within a digital print environment is preferredSkills and Competencies:Strong verbal, written communication and organizational skillsWork under pressure in a fast-paced environmentAttention to detail and hand eye co-ordinationAble to work independently or as a member of teamAbility to multi-taskMathematical ability e.g. addition, subtraction, problem solvingBasic knowledge of computersEducation:Completed high school diploma or some post education is preferredWorking ConditionsLoud environment, hearing protection requiredSafety work shoes requiredShift work, some weekend overtime may be requiredAbilty to occasionally stay late to meet client requirements is preferredPhysical RequirementsAbility to lift up to 40 lbsRequired to stand for long periods of time

Our client is recognized as a global market leading manufacturer of solid dosage processing equipment that fabricates a broad product line of pharmaceutical products.Title:   Mechanical AssemblerLocation: Richmond Hill. ONType: Temp to Perm (First 3 months on agency payroll)Pay rate:  $25.00 to $30.00 per hourShift: Days (flexible for afternoon shift if required)Reports To: Mechanical Assembler SupervisorDepartment:  Manufacturing.Position MissionA mechanical Assembler/ Service will assemble a wide variety of electro-mechanical, Hydraulic and Pneumatic products, including sheet metal components. Will be called upon to provide onsite mechanic services as needed. Mandate and Roles: Major ResponsibilitiesPerform assembly, installation and repair of electro-mechanical products with minimal supervision.Determine project requirements including scope, sequences, equipment and methods according to blueprints, drawings and written or verbal instructionsProvide technical guidance and direction to lower level personnelInspect parts, products for conformance to specification using appropriate measuring equipment and make corrections as required.Read, understand and work according to company policies and procedures and supervisors instructions.Assemble, fit, install, prefabricated parts to form subassemblies, finished product, using hand and power tools.Position, align and adjust assemblies, parts for proper fit and assemblyPosition, align and adjust bearings, shafts, moving parts for proper fit and assemblyAttach, fasten assemblies, parts together using bolts, rivets, caulks, bonds or other joining techniques.Operate pump trucks, small cranes to transport or position larger parts.Trim, file, grind, deburr, and buff surfaces, seams and joints, using hand tools and portable power tools.Position, align, gaskets, seals, trim, insulation for proper sealFabricate products, parts using lathe, milling machine, drill, saw, punching nailing equipment.Perform daily safety checks and maintain equipment in good working orderMaintain good housekeeping practices within the work area and return all unused parts to inventory.Identify materials with job numberMaintain good material handling and storage practicesOn a daily basis, record hours work against project numberWork in manner which meets production schedules and budgetsWear safety equipment and work in safe manner at all timesPerform and complete all inspections and FAT testing and documentationPerform other duties as and when required.Perform on-site service calls as required and complete all necessary documentationPerform the function of shipper/ receiver as required.Additional Responsibilities include the following but is not limited to:To recommend solutions all matters pertaining to the successful operation of the Manufacturing Department as they relate to the flow of orders through the system. To recommend major capital expenditures for the addition and replacement of machinery and equipment to the shop foremen.Requirements Education Completion of high school diploma or equivalent.Experience:Demonstration of mechanical aptitude and/or three years’ experience of working in a mechanical assembly environment.Mechanical aptitude and the ability to provide quality on-site mechanical serviceGood organizational skillsPossess current DriversDegree of SupervisionUnder the direction of the Shop Foreman the employee will be expected to achieve minimum performance levels through their working tenure. These will be reviewed on an annual basis. To be considered SUCCESSFUL, the employee must have demonstrated their ability to meet or exceed the prescribed minimum levels.Level Three: Within 12 weeks - SOMETIMES demonstrates an understanding of job requirements - Normal supervisionLevel Four: Within 26 weeks - OFTEN demonstrates an understanding of job requirements - Minimum supervisionLevel Five: Within 52 weeks - ALWAYS demonstrates an understanding of requirements - No supervision.             Program/Decision Impact and Scope:    Ensure that their objectives are clearly aligned with the strategic priorities of the company and that all efforts are made towards achieving those objectives. Accountability is accomplished through persistence in achieving excellence, being fully engaged and committed and effectively communicating.    Attributes and AttitudesDemonstrated excellent client service skills and commitment to providing attention to detail and a high standard of quality workExcellent communication skills, both verbal and writtenAbility to work independently as well as part of a teamHigh degree of concentration in all aspects of workAbility to work within tight time constraintsStress related to meet deadlines or schedules. Pleasant, clean, safe working environmentGood people skills, especially when dealing with co-workers and managementWorking Conditions and Level of EffortThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.This individual understands respects and adheres to the workplace Health & Safety rules and regulations.This position will be working in manufacturing plant setting and therefore will be exposed to the hazards: noise, heat, dust, welders flash, moving machinery (ie. Forklifts), and acids which require the use of protective equipment.Physical Effort: Considerable                                      Physical Environment: Considerable                                       Sensory Attention: Considerable     

Our client located in Markham, Ontario is currently seeing a Machine Operator for their night shift.CANDIDATES WILL BE REQUIRED TO PASS A CRIMIINAL AND CREDIT BACKGROUND CHECKSHIFT: 3 pm to 11:15 pm Monday to FridayPayrate: $17.00 per hour + .60 shift premium8 month contractPrimary Responsibilities•Maintain the highest quality standards for all processed work•Meet established department benchmarks within a month•Comply with all G+D internal policies as they relate to; processing, conduct, safety and security of both product and self•Maintain the highest integrity standards for all processed work•Must be focused and show an attention to detail•Must be focused on customer satisfaction•Must be able to multi task•Collaborative team player with the ability to work independently•Required to do troubleshooting, minor adjustments and setups•Required to do minor repairs on a daily basis•Basic computer skills a mustSecondary Responsibilities•Responsible for the organization and cleanliness of the work area•Maintain and adhere to all ISO related processes•Comply with G&D Environmental, Health & Safety policies, procedures and report any Environmental, Health & Safety hazards, incidents and concerns to the immediate supervisor/manager. Management will ensure employees are provided with job specific Environmental, Health & Safety information, training and also ensure employees follow workplace Health & Safety policies and procedures•Other duties as requiredRequirements Work Experience:•Minimum 1-2 years experience running insertersSkills and Competencies:•Good communication and reading skills•Excellent organizational and time management skills•Good memory and attention to detail•Work under minimum supervisionEducation:•Completion of High School is preferredWorking Conditions•Standing for long periods of time•Repetitive routine work•Noisy environment•Read small print on a daily basis•Fast paced secure environment•Some over time may be required•Safety shoes and smock required on the production floorPhysical Requirements•Lifting up to 40lbs•Pushing up to 20lbsIf you have the skills and experience that we are looking for to be successful in this role please submit your resume to [email protected] or fax to 905-231-3860We are an equal opportunity employerwww.winterstaffing.com  

 Responsibilities:You are responsible for all aspects of small equipment assembling of assigned shop ordersWhen required; you are responsible for all aspects of cable AND electrical assembly as assigned The small equipment work will be completed at a specific work area.Review the pick list upon receipt of the shop order and note the components still outstanding for follow up with inventory.Complete the assigned work orders as per the instructions provided.Fill in the Shop Order Assignment sheet during the manufacturing process of the product.It is your responsibility to ensure that all issues arising from the manufacture of the specific product is written and attached to the current documentation as it occurs. Upon completion of the shop order this must be forwarded to the Production Office for correction.Should you have a component part or an issue related to non conformance, it is your responsibility to advise the Supervisor/ Manager and complete a non conformance report. You are responsible for the accurate recording of your daily schedule electronically against a shop order on MAX or when required on a Labor Requisition form. Unless authorized by your Supervisor/Manager all requests from other departments must be refused.Upon completion of a product, it is your responsibility to ensure that the product is moved to the next stage of the process for completion i.e. a completed module must be moved into the Quality Control & Testing area when completed.After the shop order is complete, all unused components must be returned to the stock room; please note that you are responsible for ensuring that the number of items returned are listed on the pick list of the shop order and verified by the inventory clerk upon receipt.You are responsible for ensuring that your work area is kept clean and tidy daily and your tools are stored properly prior to leaving at the end of the workday.You must follow all health and safety policies and procedures; ensure you wear safety shoes and glassesAny other duties as assigned by ManagementRequirements  Education and experience:Electric or Electromechanical diploma through a reputable college5+ years  electrical   assembling experience in a manufacturing environmentMust be able to read drawings and schematicsExcellent oral and written communication skillsVery meticulous work habitsExperience in building large and detailed panelsProblem solving and analytical reasoning requiredPlease e-mail resume to [email protected]

Our client is in the food manufacturing industry. They are looking for a licensed Millwright for their busy production plant. Location: Warden/St.Clair (Scarborough)Shift: Rotating between days/afternoons/nights ( every 2 weeks )Permanent positionPayrate: $30.00-$33.00 per hour to start  Essential FunctionsPreform preventative and predictive maintenance to mechanical systems as required (including routine maintenance & repairs   of conveyor belts, gear boxes, lubrication, soldering, brazing, welding and bearing replacement)Writing maintenance and job reports on a daily basisInstallation, hoisting and rigging, leveling, aligning of material handling equipment and production machineryInstallation, maintenance and rebuild of power transmission systems, pumps, compressors, fans and blowersFabrication and modification of components using standard shop tools (i.e. drill press, grinder, brake, shear and milling machine)Troubleshoot mechanical problems (use of technical drawings and schematics).Machine shop fabrication of brackets and small partsAll other duties as required  Health and SafetyConduct all Job Tasks in a Safe and Responsible mannerParticipate in all Health & Safety, GMP and HACCP training as requiredReport any accidents, incidents and unsafe/hazardous conditions to your lead hand or supervisorReport any damages of property and machinery to your lead hand or supervisorEnsure that you understand how and when to use the Personnel Protective Equipment (PPE) that is located in your work area.Practice safe work practices such as: log out/tag out procedures, using PPE’s as directed, fire prevention, follow GMP’s and keep work environment safe for othersEnsure you comply with OHSA, WSIB, MOL regulations and/or laws that govern “workers” responsibilities in the workplace and Comply with Tradition Fine Foods Ltd. Safety Rules and Good Manufacturing Practices, and HACCP Programs.  Physical Demands:May be required to stand/sit/walk for long periods of timeMay engage in frequent bending, stooping or squattingDue to the environment, must be able to work in various weather and temperature conditions which include extreme heat, humidity and coldMust be able to work in tight or enclosed spacesMust be able to lift a minimum of 25kg (floor to waist & waist to shoulder)Requirements Job SpecificationsEducation equivalent to the completion of grade 12Post secondary education related to machinery maintenance and repair including millwrightAbility to read and interpret manufacturer manuals, technical drawings and schematicsAbility to maintain working relationship with coworkers and subordinatesAvailable for shift workMinimum 3 years of relevant work experience preferably in the manufacturing industry    If you have the skills and experience that we are looking for to be successful in this role please apply online, email or fax your resume to Aneezah [email protected] to 416-495-8487www.winterstaffing.comWe are an equal opportunity Employer  

Position Summary: Under the direction of the Hub Supervisor, this position is accountable for meeting and exceeding quality standards in a Hub production centre. The incumbent will manage jobs from order entry through to completion according to customer specifications. Accountable for maintaining productions area and equipment. Processes customer orders efficiently and accurately to maximize profitability and maintains internal customer satisfaction by providing high quality service. Primary Responsibilities: •Set up and produce single or multiple copies of printed or other machine-acceptable original material, using photocopy equipment with reduction, enlargement, collating and binding capabilities. •Execute all finishing services as required. •Proof jobs and evaluate output and make necessary changes to ensure job integrity before, during, and after each production run of a job. •Maintain colour quality control standards. •Colour copiers calibrated during each shift. •Read order instructions and understand steps required in the production workflow. •Respond appropriately to fault, error and alert messages and escalate to supervisor. •Record meter reads in Compass. •Provide a high level of customer service to store associates relating to order status, product and service inquiries and error recovery. •Collaborate with team members to ensure all orders are completed efficiently and accurately. •Responsible to deliver assigned jobs on time with a high level a accuracy. •Has a complete understanding of all company policies and procedures related to this position, as outlined in the training checklist. •Understands, proactively models and adheres to all privacy policies. •Understands and adheres to Staples' document handling and copyright policies. •Execute administrative requirements such as billing and quality control checklists. •Check and understand all sources of communication for information (white boards, bulletin boards, portal, etc). •Responsible for the safe and proper use of all store equipment and are required to inform management of any maintenance issues regarding the equipment. •Promotes and maintains a safe working environment and follows all company protocols for safety and is required to report any unsafe working conditions to a manager. •As per policy, required to have personal parcels (bags, totes, backpacks, purses, etc.) checked by a manager prior to leaving the store premises. •Ensures the general cleanliness of workstations, lunchroom and washrooms according to company standards is maintained. •Identifies and communicates suggestions for improvements in all areas of business. • Basic: •Good technical proficiency with computers and Microsoft software applications would be an asset. •Comfort and knowledge working with print and finishing equipment would be an asset. •Ability to resolve clients concerns in a diplomatic manner. •Ability to engage clients in a friendly and professional manner. •Capacity to communicate with clients effectively using a variety of mediums. •Ability to work effectively with ongoing distractions is necessary. •Can engage appropriately and work as part of a team. •Capacity to work independently and seek out assistance as required. Preferred: Experience: •1-2 Years in print production environment is preferred. Education: •Working towards or successful completion of high school is preferred. Additional Information: •Conditions of the work environment are such that minor stress and physical discomfort may occur. •This position will be based in a production centre environment and will require extended periods of standing. •You will be exposed to moderately disagreeable levels of noise generated by the operation of production equipment. Staples is committed to providing accommodation to people with disabilities throughout the job application and interview process to the point of undue hardship. If you require an accommodation during the application or interview process, please contact a Customer Care Representative at 1-866-782-7537.

Position Summary: The Copy & Print Centre (CPC) Supervisor oversees the operations of the Copy & Print Centre. Accountable for driving sales and margin. Responsible for coaching and providing high quality instruction to the CPC Associates. Manages daily performance of direct reports and ensures ongoing performance development. Takes an active role in development of the Copy & Print business. Stores must achieve a copy and print sales threshold of $14,500 per week (on average) in Division 6 sales, less Class 600 to be eligible for this position. Primary Responsibilities: • Monitors and directs workflow standards that drive quality orders and extremely satisfied clients. • Ensures the execution of advanced and standard non-production tasks such as supplies replenishment, equipment maintenance and execution of the Production Log, to ensure strong business continuity. • Delivers on sales and profit plans. • Creates Associate schedules and ensures accurate labour spends assigned to department • Manages escalated customer concerns. • Ensures team is accurately filtering and understanding the needs of the Business and Consumer clients. • Sets financial and non-financial objectives for the team. • Gains key insights around team developmental opportunities and construct individual coaching plans that motivate performance, close capabilities gaps, and produce strong levels of accountability. • Executes Performance Development Reviews (PDR's) in a timely manner. • Models and promotes expert relationship and consultative selling. • Supports advanced selling and production requirements for small business customers. • Seeks out and delivers client leads to be pursued by business. • Uses a variety of communication tools (one-on-one, department meetings, bulletin boards etc.) to successfully ensure all associates are aware of daily, weekly, and monthly goals. • Has a complete understanding of company policies and procedures related to their position and direct reports, as outlined in the training checklists. • Ensures all associates maintain general cleanliness of CPC workstations, according to company standards. • Promotes and maintains a safe working environment and follows all company protocols for safety and is required to report any unsafe working conditions to a manager. • As per policy, required to have personal bags (parcels, totes, backpacks, purses, etc.) checked by another manager prior to leaving the store premises. Basic: • Demonstrated leadership ability. • Demonstrates strong selling ability. • High technology acumen with digital print and finishing equipment, computer hardware and software. • Strong familiarity with digital and specialty print products and production techniques. • Ability to plan, organize and prioritize efficiently in the CPC to effectively service the clients. • Ability to resolve clients concerns in a diplomatic manner. • Ability to engage clients in a friendly and professional manner. • Ability to work effectively with ongoing distractions is necessary. • Capacity to communicate with associates and clients effectively using a variety of mediums. • Can engage appropriately and develop a team environment. • Capacity to work independently and seek out assistance as required. Preferred: Experience: • 3-4 years progressive experience in retail with previous supervisory and coaching experience. • 1-2 years in a Graphic Communications/Print environment with a working knowledge of graphic design principles. Education: • Successful completion of high school or greater. Additional Information: • Conditions of the work environment are such that minor stress or physical discomfort may occur. • You are required to stand in a stationary position for periods of time. This would occur while working on various orders. • You will be exposed to moderately disagreeable levels of noise generated by the high-speed copiers and the continual ringing of the telephone and internal paging system. • A moderate amount of physical effort is required while stocking paper and copy supplies, you are capable of choosing when to stop and relax. Staples is an equal opportunity employer committed to diversity and inclusion and we encourage applications from all qualified candidates, including those with disabilities. We will accommodate applicants' needs, upon request, throughout all stages of the recruitment process. Please inform us of the accommodation(s) that you may require. Information received relating to accommodation will be addressed confidentially.

Millwright certification required. 3 Shift Rotation every two weeks.*Provide leadership and supervision to skilled trades employees including Industrial Mechanics/Millwrights and apprentices. Supervise daily operations to ensure production equipment is maintained and repaired to meet scheduled production targets and minimize production downtime. General facilities maintenance and assisting/implementing capital improvement projects.

Status: Regular Full TimeWorking Conditions: Hybrid  Education Level: 4 years of University training Location: Pickering, ON Shifts(s): DaysTravel: 10% Deadline to Apply:  February 20, 2024Electrify your career and help build a brighter tomorrow. Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history. Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job. ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.  If you require information in a format that is accessible to you, please contact [email protected] NEW CAMPUS: In late 2024, OPG is establishing our new campus at 1908 Colonel Sam Drive, Oshawa, Ontario. The new campus will provide a cutting-edge work environment that fosters collaboration and innovation.JOB OVERVIEW Ontario Power Generation (OPG) is looking for dynamic, strategic, and results-driven professional to join our team in the role of Health & Safety Advisor.Reporting to the Manager, H&S Field Services, the Health & Safety Advisor is accountable to provide health and safety related support to their assigned client groups. This includes support in the operation of the OPG safety management system within their client groups, supporting line supervisors and managers with field-focused solutions to their health and safety issues, supporting line supervisors and managers with interpretation of legislative requirements and OPG safety requirements, and delivering or coordinating specialized health and/or safety support.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement, and education efforts as part of the company’s commitment to growing its social license.  KEY ACCOUNTABILITIES  The Health and Safety Advisor is accountable to provide health and safety related support to their client groups. This includes leadership and support in the operation of the OPG safety management system with their client group, such as facilitating the annual risk assessment, development, coordination and monitoring of the annual health and safety continuous improvement plan, and monitoring to ensure compliance in the field with OPG health and safety requirements. In addition, the health and safety advisor will support line supervisors and managers with field-focused solutions to their health and safety issues, and support line supervisors and managers with activities including interpretation of legislative requirements and OPG safety requirements, incident investigation, incident ratings, regulator field visits and response, and delivering or coordinating specialized health and/or safety support from the shared services center, center of expertise, or thru contracted services. This can include but is not limited to, ergonomics, industrial hygiene, WSIB support, contractor safety, employee disability management and return to work, and employee health promotion. Provide independent advice, guidance, and assistance to project managers on occupational health and safety matters related to contracts, to ensure compliance with established procedures, regulatory requirements, and guidelines.Support the development and execution of programs and initiatives for leading/lagging metrics to monitor safety performance inclusive of contractor performance.Provide advice, guidance and assistance to line management and supervisors on all health and safety matters including the interpretation, explanation and application of Occupational Health and Safety Legislation, standards, programs, policies, and practices to attempt to ensure that established procedures and guidelines are complied with.Coordinate, and monitor the implementation of the OPG Health and Safety Management System in consultation with the client group management team.Maintain health and safety information on behalf of the client group, on the performance against targets and effectiveness of programs. Make recommendations to management as required to recover performance where projected to exceed targets and objectives.Act as the primary representative to local and regional agencies on Health and Safety matters, e.g., Ministry of Labour, Immigration, Training and Skills Development on behalf of the client group management teamInvestigate incidents, accidents and injuries and provide findings and recommendations to the Line of Business Manager. As assigned, lead or participate on teams investigating incidents, making recommendations for corrective actions to site and senior management as required.Liaise with contractors and OPGI staff providing technical assistance and expert advice that may arise between contractors and OPG production staff.Initiate reporting requirements of occupational injuries, disease, and exposures to hazardous agents, and liaise with the Workers Safety and Insurance Board (WSIB) and the corporation's agent to provide follow-up information as appropriate. Advise Management of WSIB requirements and implement procedures and processes to ensure complete and accurate reporting of injuries and illnesses and records of WSIB claims.Support line supervisors and managers with graduated return-to-work planning and monitoring of employee's recovery to full duties, as requested.Participate, lead, and/or coordinate internal and external evaluations (self-assessments, audits, evaluations) of health and safety programs for the client group and for contractor H&S program and/or H&S project plan.Participate as requested in the development, and continuous improvement of OPG's health and safety program.Other Duties as Required.EDUCATION 4 years of University training.QUALIFICATIONSMinimum of 6+ years of experience in a similar role.National Construction Safety Officer (NCSO) and Canadian Registered Safety Professional (CRSO) designations are preferred Mental Health First-aid certification would be an asset combined with passion for psychological wellness in the workplace.Experience in electrical and trade experience is preferred.Requires experience in a Health and Safety function to be familiar with the policies and procedures governing Health and Safety issues in Ontario.Experience in a complex work environment with the ability to communicate effectively with all levels of staff Experience working with external stakeholders and regulators.Ability to apply and interpret Health and Safety requirements in an industrial and construction environment. Advanced written and oral communication skills to clearly communicate with a wide variety of people and to act as a resource/consultant/facilitator in a variety of committees or task group situations.Data analytic skill set with ability to review and compile data summaries effectively and efficiently. The successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct. What Makes a Career at OPG Different? As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy.  At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:   Safety – it’s our business.Integrity – always lead with integrity.Excellence – never satisfied with good enough.Inclusion – working together for powerful outcomes.Innovation - creativity accelerates possibility. Here's why OPG might just be the ideal workplace for you: Exceptional range of opportunities province-wide Long-term career growth and development opportunities Electricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors. Our promise to you: We care about the safety and the well-being of our employees. It is our utmost priority. A supportive work environment where you can be your best every day. Opportunities to stretch and develop. Offer different ways for you to give back to communities where we operate. Partner with Indigenous communities and support local businesses. We support employment equity, diversity, and inclusion. Are you ready to start a career that has the power to electrify life on and off the job? Apply now. APPLICATION PROCESS Please submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T. February 20, 2024  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted.#LI-Hybrid.

Status: Regular Full Time  Working Conditions: Hybrid Working Environment   Education Level: bachelor’s degree in engineering or Applied Science (Electrical engineering - Power Systems preferred)Location: Courtice, ONPosition:  MultipleShifts(s): Days, shifts required during special periodsTravel: 30%  Deadline to Apply: 21 Feb,2024Electrify your career and help build a brighter tomorrow. Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history. Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job. Now we’ve set our sights on being a net-zero carbon company by 2040 and a catalyst to help the economies where we operate achieve net-zero by 2050. OPG operates a diverse portfolio of generation assets including nuclear, hydroelectric, biomass and solar. We are also a cleantech leader and innovator, offering challenging and unique work opportunities. Help us use our power to change the world. ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made. If you require information in a format that is accessible to you, please contact [email protected] NEW CAMPUS: In mid-2025, OPG is establishing our new campus at 1908 Colonel Sam Drive, Oshawa, Ontario. The new campus will provide a cutting-edge work environment that fosters collaboration and innovation.   JOB OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic, and results-driven professional to join our team in the role of an Electrical and Protection & Control Engineering Specialist at our Courtice location.Reporting to the Plant Technical Support Manager, the Electrical and Protection & Control Engineering Specialist is a member of the Central Engineering team, with a focus on Regulatory Compliance, Electrical Protection, Generator Controls, and Electrical Power EquipmentIn this role, you will be responsible for providing technical advice and guidance on a variety of matters with regards to Regulatory Compliance, and Protection and Control, and Electrical Power Equipment supporting Hydroelectric and Thermal station maintenance, operations, performance, reliability, design, and commissioning. Key accountabilities include providing recommendations on planning, organizing, conducting inspections, installations and testing as well as oversight of servicing, maintaining, and renovating as necessary for the continuous safe, efficient, and economical operations of our hydroelectric and thermal plants.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement, and education efforts as part of the company’s commitment to growing its social license.  KEY ACCOUNTABILITIES  Provide technical advice and guidance on a variety of technical matters for Hydroelectric and Thermal stations maintenance, operations, performance, design and commissioning.  Plan, organize and conduct inspections as well as provide engineering support for the planning, organization and conducting of installations, tests, servicing, maintenance, and renovations necessary for the continuous safe, efficient and economical commissioning and operation of Hydroelectric and Thermal plant equipment.Perform assessments, recognize technical deficiencies, recommend remedial measures, prepare and co-ordinate design changes for submission and approval as required to remain in compliance with applicable codes and legislative requirements.  Implement and conduct approved scheduled programs.  Participate in staff meetings convened to plan and organize work and resourcing required.  Responsible for the preparation and submission of various technical reports.  Assist in developing work methods or procedures including local technical procedures and implement as approved. As a single point of contact for assigned project work or work programs, support project management activities, co-ordinate necessary inputs from other technical disciplines.  As necessary, prepare investment justifications based on conditions assessments of assigned existing systems and equipment. Arrange and oversee contract work.  Prepare specifications, assist in the evaluation of Requests for Proposals, and recommend awarding contracts.  Work with suppliers to resolve problems affecting equipment performance and recommend design changes based on operating experiences.  Oversee work performed by contractors to ensure conformance to specification, resolving differences related to contract interpretation, and dealing with complaints as required.  Maintain records for reference and payment.  Investigate incidents of failure or unsatisfactory performance of equipment, material and service.  Recommend improvements, review input arising from proposed procedural changes and reconcile conflicting viewpoints from trades or trades supervisory staff.  Complete design changes and corrective measures and implement as approved.Maintain close surveillance over equipment noting situations that require action, recognizing impending difficulties, and exercising effective staff control.  Report major maintenance requirements to Supervisor, otherwise, determine and take corrective measures necessary.Collaborate in studies or investigations conducted under a consortium of design, research, operating groups/utilities, and regulatory bodies concerned with the safe efficient and economical production and distribution of power via hydroelectric and thermal plants and other facilities, where applicable.Oversee and assure conformity to safety, environmental and other relevant regulations, legislative changes and directives governing work within the scope of responsibilities assigned to the business unit.Ensure strict adherence to procedures, standing instructions, safety rules, first aid, and resuscitation practice.Prepare detailed estimates for projects and other activities as directed and assist in the preparation of the Section budget and business plans.Keep abreast of advances in hydroelectric plant design and development in general and the assigned technical field in particular.  Participate in various training programs.  EDUCATION Bachelor's Degree in Electrical Engineering or Science in Engineering (Electrical); andCandidate must be a fully licensed engineer in the province of Ontario, or be eligible to be licensed in the Province of Ontario  QUALIFICATIONS   We are looking for an engineering professional with the following:Minimum of 8 years of progressive experience as an Electrical Engineer. Must have experience working in an industrial/plant environment with electrical power distribution equipment, protections and controls.Ideally the successful applicant has prior experience working in the energy industry; power generation, transmission, and/or energy distribution with a utility, and should have a thorough understanding of:Protection fundamentals and protection systems design.Generator Controls (Exciters and Governors)NERC Standards, IESO market Rules and NPCC DirectoriesStationary Battery Systems.Engineering studies such as short circuit, coordination, arc flash and load flow.This position is part of the Electrical and Protection & Control Department, therefore a high level of understanding and experience with the following is required:Hydroelectric and Thermal station generators.Liquid-filled and dry-type transformers.High and medium voltage switchgear.Hydro and Thermal station electrical auxiliary systems.Generator, transformer, and station service equipment protective relaying.Generator and auxiliary control systems.NERC Standards, NPCC Directories, Transmission System Code and IESO Market Rules.Plant networks and communication protocols.Programmable Logic Controllers and Supervisory Control and Data Acquisition Systems.Process control cyber security.Effective written and oral communications skills, demonstrated in your technical writing abilities to communicate effectively for the preparation, presentation and implementation of procedures, instructions and comprehensive technical reports; and reviewing drawings, Demonstrated knowledge of the Occupational Health and Safety Act and Regulations, especially for Industrial Establishments and various codes and standards associated with electrical engineering and application of their requirements.Strong interpersonal skills and the ability to work collaboratively with various business units and stakeholders.Must be a team player, but as required must be able to work independently with little supervision.Self-motivated, results and detail-oriented individual with ability to work in a fast-paced changing environment and effectively manage multiple tasks simultaneously.Strong problem solving and innovative thinking skills, must be able to provide solutions, ideas and recommendations through effective issue resolution.Proven track record of delivery results.A quick learner, ability to break down complex and technical ideas. Must be able to effectively navigate a highly technical environment in a complex organizational structure.High integrity, upholding company values including Health and Safety, and protection of the environment.Valid Ontario Driver’s License in good standing or a valid Driver’s License in good standing from another Canadian province with intent and ability to obtain a valid Ontario Driver’s License; andWillingness to travel; approximately 25% of timeAbility to work effectively and efficiently in a flexible hybrid office environment.The successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.   What Makes a Career at OPG Different? As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy.  At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:   Safety – it’s our business. Integrity – always lead with integrity Excellence – never satisfied with good enough  Inclusion – working together for powerful outcomes Innovation - creativity accelerates possibility. Here's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors. Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity, and inclusion. Are you ready to start a career that has the power to electrify life on and off the job? Apply now.    APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., 21 Feb,2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted. #LI-Hybrid

#LI-OnsiteStatus: Regular Full Time Working Conditions: On-SiteEducation Level: Grade 12 or equivalent and 2-year college diploma in a related field of study*Location: Des Joachims Generating Station - Rolphton, ONNumber of Position(s): 2Shifts(s): DaysTravel: Yes- 10%Deadline to Apply: February 29, 2024Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of  Electrical & Control Technician/Technologist, to join our team at Des Joachims Generating Stationin Rolphton, ON.Reporting to the Trades Management Supervisor, this position is responsible to maintain and overhaul all electrical/ electronic/control/protection/telecommunication associated with generating stations and facilities.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES Install, commission, inspect, troubleshoot, service, maintain and overhaul and assist with the design for all electrical/ electronic/control/protection/telecommunication or testing equipment, associated with generating stations and facilities. Take appropriate preventative or corrective action.Prepare electrical, control, instrumentation, protection and telecommunication sketches, drawings, and bills of material. Carry out document maintenance activities.Co-ordinate large projects or highly complex maintenance enhancements related to the installation of new electrical systems, or the replacement of existing systems with different technologies.Carry out contract coordination and inspections to ensure effective quality assurance.Assist in the design of Programmable Logic Controllers (PLC) programs as required for the efficient operation of the station. Experience in programming Modicon PLC using Unity Pro.Experience in networked PLC's related to PLC maintenance, configuration, programming, testing, control systems expertise, troubleshooting field devices alarms/ failures.Experience in Supervisory Control and Data Acquisition (VT SCADA), specifically integration, screen and tag modifications and verification of end devices interfacing with SCADA.Experience with communications related to PLC's, SCADA, Protections and Metering to troubleshoot communication failures to networked equipment.Setup, install, programming and connecting of servers/ network switches/ modems/ routes/ gateways. Installation, repairs and commissioning of new network cables.Modify, Commission, and Maintain VT SCADA system in accordance with Regulatory Governance.Commission, programming, and perform field testing on various protection relays used in the power industry (GE, BECKWITH, SEL etc.) Install, commission, inspect and test High Voltage (HV) Equipment including HV Breakers and HV Transformers.Carry out a variety of measurements including testing of electrical, control and protection equipment to recognized standards and procedures.Determine generating system reliability and power system production. Develop and maintain supplementary computer programs to facilitate analysis.Participate in studies associated with energy production, load and capacity, demand management, etc., and provide regular and on- demand reports. Establish and maintain documentation / program files.Perform Level 5 Work Protection activities.Provide technical support, advice, coordination and assistance with regard to emerging work, projects and daily routines, including the development of technical/operational solutions to problems.Prepare and modify technical procedures and standards and generate reports.Accountable for the health, safety & well being of self and others, in accordance with technical/operating procedures and standards, and includes the development of technical/ operating solutions to problems.EDUCATIONGrade 12 or equivalent and 2-year college diploma in a related field of study**Relevant Field of Education includes: Instrumentation Tech/Technologist; Electrical Tech/Technologist; Electronics Tech/Technologist; Electromechanical Engineering TechnologyQUALIFICATIONSHold a valid Certificate of Qualification (309A or 442A)Electrical license in Industrial or Construction preferred5+ years of experience as an electrical and control technician/technologistPreference to applicants with experience installing, maintaining, inspecting High Voltage Equipment Experience programming and troubleshooting Modicon PLCs using Unity Pro is considered an assetWork as part of a team in a fast paced, dynamic environment, with tight deadlines and expected high level of detail Have exceptional problem solving abilitiesPossess strong communication and interpersonal skillsDays based position, but flexibility required to work weekends as necessaryBe eligible to work in CanadaThe successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enough Inclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., February 29, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted..

Status: Regular Full Time  Working Conditions: Hybrid Working Environment     Education Level: 4 year University DegreeLocation: Bowmanville, ONNumber of Position(s): 2Shifts(s): DaysTravel: Yes- 10%Deadline to Apply: March 1, 2024Electrify your career and help build a brighter tomorrow.Every generation has a challenge that defines them. At OPG, we are calling on all innovators, disruptors, thought leaders and change-makers. Join us to electrify life in one generation and build a sustainable future powered by our electricity, our ideas, and our people. Join OPG and make history.Whether you work in the skilled trades or are a business professional, a career at OPG is an opportunity to electrify your life on -- and off -- the job.ACCOMMODATIONSOPG is committed to fostering an inclusive, equitable, and accessible environment where all employees feel valued, respected, and supported. If you require accommodation during the application or interview process, please advise us as soon as possible so appropriate arrangements can be made.If you require information in a format that is accessible to you, please contact [email protected] OVERVIEWOntario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of Health & Safety Advisor.Reporting to the Manager Health & Safety Field Services, this position is accountable to provide health and safety related support to their assigned client groups. This includes support in the operation of the OPG safety management system within their client groups, supporting line supervisors and managers with field-focused solutions to their health and safety issues, supporting line supervisors and managers with interpretation of legislative requirements and OPG safety requirements, and delivering or coordinating specialized health and/or safety support.This is an exciting opportunity to work in an environment where you will contribute to OPG’s public outreach, engagement and education efforts as part of the company’s commitment to growing its social license. KEY ACCOUNTABILITIES Manage safety issues related to knowledge of occupational hazards and related fields including biology, toxicology.Developing and interpreting industrial hygiene monitoring strategies.Developing effective written reviews of occupational hygiene literature, related occupational health and safety law and its interpretation.Acting as a single point of contact for industrial hygiene related matters at the Darlington Nuclear StationDevelop programs and metrics to monitor contractor safety performance, and provide recommendations to Line Management in effective ways to optimize this performance.Provide advice, guidance and assistance to line management and supervisors on all health and safety matters including the interpretation, explanation and application of Occupational Health and Safety Legislation, standards, programs, policies and practices to attempt to ensure that established procedures and guidelines are complied with.Coordinate, and monitor the implementation of the OPG Health and Safety Management System in consultation with the client group management team.Maintain health and safety information on behalf of the client group, on the performance against targets and effectiveness of programs. Make recommendations to management as required to recover performance where projected to exceed targets and objectives.Act as the primary representative to local and regional agencies on Health and Safety matters, e.g. Ministry of Labour on behalf of the client group management teamInvestigate incidents, accidents and injuries and provide findings and recommendations to the Line of Business Manager. As assigned, lead or participate on teams investigating incidents, making recommendations to site and senior management as required.Provide advice, guidance and assistance to project management staff on health and safety project management and contracting strategies including owner/constructor determinations. Support Project Managers and Contract owners by completing technical assessments and evaluations to inform decisions on the contracting strategy to be utilized.Liaise with contractors and OPG staff providing technical assistance and expert advice that may arise between contractors and OPG production staff.Initiate reporting requirements of occupational injuries, disease, and exposures to hazardous agents, and liaise with the Workers Safety and Insurance Board (WSIB) and the corporation's agent to provide follow-up information as appropriate. Advise Management of WSIB requirements and implement procedures and processes to ensure complete and accurate reporting of injuries and illnesses and records of WSIB claims.Support line supervisors and managers with graduated return-to-work planning and monitoring of employee's recovery to full duties, as requested.Participate, lead, and/or coordinate internal and external evaluations (self assessments, audits, evaluations) of health and safety programs for the client group and for contractor H&S program and/or H&S project plan.Participate as requested in the development, and continuous improvement of OPG's health and safety program.EDUCATION4-year University degree in a related fieldQUALIFICATIONSAbility to work effectively and efficiently in a flexible office environment.Minimum of 6+ years of experience in a similar role.The following certifications are considered to be an asset: Registered Occupational Hygienist (ROH) and/ or Certified industrial Hygienist.National Construction Safety Officer (NCSO) and Canadian Registered Safety Professional (CRSO) designations are preferredMental Health First-aid certification would be an asset combined with passion for psychological wellness in the workplace.Experience in electrical and trade experience is preferred.Requires experience in a Health and Safety function to be familiar with the policies and procedures governing Health and Safety issues in Ontario.Experience in a complex work environment with the ability to communicate effectively with all levels of staffExperience working with external stakeholders and regulators.Ability to apply and interpret Health and Safety requirements in an industrial and construction environment.Advanced written and oral communication skills to clearly communicate with a wide variety of people and to act as a resource/consultant/facilitator in a variety of committees or task group situations.Data analytic skill set with ability to review and compile data summaries effectively and efficiently.The successful candidate will exhibit uncompromising integrity and commitment to upholding corporate values, and the OPG Code of Business Conduct.What Makes a Career at OPG Different?As Ontario’s largest clean energy generator, we’re building, expanding, and innovating the equipment and technology that keeps Ontario powered with clean, reliable energy. At OPG, our values are our strengths.  They are fundamental truths about our organization that don’t change:  Safety – it’s our businessIntegrity – always lead with integrityExcellence – never satisfied with good enoughInclusion – working together for powerful outcomesInnovation - creativity accelerates possibilityHere's why OPG might just be the ideal workplace for you:Exceptional range of opportunities province-wideLong-term career growth and development opportunitiesElectricity is vital to the province and OPG’s clean electricity is helping decarbonize other sectors.Our promise to you:We care about the safety and the well-being of our employees. It is our utmost priority.A supportive work environment where you can be your best every day.Opportunities to stretch and develop.Offer different ways for you to give back to communities where we operate.Partner with Indigenous communities and support local businesses.We support employment equity, diversity and inclusion.Are you ready to start a career that has the power to electrify life on and off the job? Apply now.APPLICATION PROCESSPlease submit your application online at https://jobs.opg.com/ by 11:59 PM E.S.T., March 1, 2024.  OPG thanks all those who apply; however, only candidates considered for an interview will be contacted.#LI-Hybrid  .

About Us: Talize is a proudly Canadian owned and operated national for-profit retailer offering quality resale apparel and housewares at unbeatable prices. As Canada's newest and most unique shopping experience we offer new, like-new, and vintage items all under one roof. That means fantastic deals on brand names and designer fashions, and housewares! Duties and Responsibilities: Leadership Support the Retail Floor Manager by coordinating the efforts of Retail Floor Team Members to ensure daily department standards are achieved. Assist the Retail Floor Manager with the selection, screening, interviewing, hiring, and onboarding of Retail Floor Team Members. Lead in the training of Retail Floor Team Members in point of sale operations, customer service, merchandising, loss prevention, company policies and recovery duties - among other tasks. Work as an integral part of the management team by providing support, attending meetings and sharing information. Employee Relations Support the Retail Floor Manager with providing direction to Retail Floor Team Members regarding company policies and procedures. Recognize and report Retail Floor Team Member policy infractions to the Retail Floor Manager and General Manager. Assist in the implementation of employee recognition programs and events. Health and Safety Monitor all register areas, the retail floor, fitting rooms and washrooms to ensure they are kept in an organized and clean manner in accordance to company housekeeping standards. Take precautionary measures and follow company guidelines against external and internal theft. Take appropriate action when external and internal theft occurs. Provide a safe workplace environment by identifying and properly removing any hazards and reporting hazards to the General Manager and Joint Health and Safety Committee. Immediately report and document employee or customer accidents to the Retail Floor Manager or General Manager. Departmental Responsibilities Routinely complete floor walks to determine priorities and delegate tasks to Retail Floor Team Members. Accurately handle all register transactions including exchanges, refunds, cancellations, tax exemption, etc. Promptly provide pricing verification for merchandise when tags are missing or when a price is in question at the register. Ensure that all customer needs are addressed, such as: answering customer inquiries, solving customer complaints, and processing customer transactions in a timely manner. Inspect register areas and the retail floor to verify they are stocked, and merchandise is properly sorted. Manage store funds securely and process cash deposits in a timely manner. Assist the Retail Floor Manager with the preparation and execution of sale days. Other Duties Maintain professionalism while communicating with peers, managers and customers. Collaborate with store management to ensure operations and production work as a team toward the same goals - this may include sharing some responsibilities between the two departments. Responsible for opening and closing the store. Perform additional job-related duties as requested by the Retail Floor Manager or General Manager . Experience: 2+ years of experience working in retail. 1+ years of experience in a leadership role. Previous work in a thrift retail environment is considered an asset. Core Competencies: Customer Oriented- Provide creative approaches to improve customer experience. Attention to Detail- Monitor the store to ensure that team members have maintained a visually appealing store, through the proper displaying of merchandise. Job Recognition- Recognize when to escalate appropriate or specific situations to the Retail Floor Manager . Reliability- Shows commitment, dependability and accountability in one's work, and follows through on all designated tasks and projects regardless of interruption. Team Building- Work to develop, maintain, and promote positive working relationships within the Retail department to promote inclusivity. Communication- Be clear and articulate when speaking to a group or an individual, assuring that the intended message is fully comprehended. Physical Requirements: Ability to stand and walk for the duration of shift. Constant bending, reaching, and using hands for repetitive actions. Lifting and carrying items up to 50lbs without assistance throughout shift . Pushing and pulling merchandise containers on wheels weighing up to 500lbs. Work Environment: Exposure to dust - all of designated shift. Exposure to periodic temperature fluctuations and noise levels. Work schedule hours will include days, evenings, weekends and holidays. Interaction with customers, clients and the public at large. Talize Inc. is an equal opportunity employer and is committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. If you require any type of accommodation, please let the hiring manager know, and we will work with you to meet your needs. #HP

Reporting to the Vice President and partnered with the Sales and Marketing Department, this jobrequires extensive knowledge of cost estimating process. This position provides accurate and timelyfinancial estimates on RFPs (Request for Proposals), engineering drawings and high-levelengineering statement of work. This position also leads cost reduction projects and favorsIndustrial Engineering experience as it utilizes many of the I.E. methodologies by working withengineering to identify ways to reduce the cost of our products.ROLE AND RESPONSIBILITIESProvide comprehensive, detailed cost estimates (material cost, manufacturing labor hours operations non-recurring costs/tooling costs and all related assumptions) for commercial aircraft interiors.Assist in generating Customer proposals by interpreting RFPs, generating product features, working with Engineering to create product renderings and defining detailed levels of product offerings. This position requires the ability to develop assumptions to help define work scope when RFPs are limited in detailed information.Research, analyze and interpret historical data to support estimates and cost models.Participate in the development and refinement of pricing models.Works closely with engineering to define and interpret statement of work and associated impacts to the operations department.Work closely with manufacturing to understand manufacturing processes, material usages and labor requirements.Research detailed bill of materials to understand major cost drivers and analyze ways to reduce BOM costs.Develop and maintain estimating tools, databases and cost estimating models.Assist cross-functional teams to track performance of cost estimates in order to refine future cost estimating relationships/models.Serve as a consultant to upper management by presenting results of cost estimates and making recommendations for marketing proposals.Assist Engineering, Production and Operations by recommending design for cost methodologies and ease of manufacturability.Assure timeliness, accuracy, and completeness of bids, prior to submittal.Performs other related duties as required.Qualifications and Education RequirementsBachelor Degree (BA/BS) or engineering degreeA minimum of 3 - 7 years related experience and/or training; or equivalent combination of education and experience.Cost estimating experience in a Manufacturing environment.Ability to read technical models and drawings (CATIA5) and identify material call outs.Must be proficient with Microsoft Office Suite and other relevant computer skills: Ability to work with excel spreadsheets, interact with database and use reporting functions.Knowledge of Bill of Material (BOM) structure and ERP systems.Understanding of Geometric Dimensioning and Tolerance (GD&T), and how that affectsPreferred SkillsMust be self-directed and able to deliver under pressure, meeting customer and management deadlinesStrong math and mechanical aptitude.Technical skills in process engineering and quality assurance are requiredCost accounting experience is strongly preferredProficiency in Microsoft Office Products is a must and ability to learn other systems as requiredCapacity to make independent decisions and substantiate themAccountability, Excellent organizational time management skills and strong interpersonal skills Strong analytical skills, Excellent verbal and written communication skills, strong problem solving skills particularly relevant in managing customer concerns, ability to multitask and meet challenges, innovative, and tactical

The Maintenance Manager is responsible for developing a functional maintenance team. This includes creating procedures, work orders, preventive maintenance, utilizing CMMS (computerized maintenance management system), critical spare parts by analyzing data and recommending actions to minimize downtime of machines.Job Responsibilities• Safety first: demonstrate 100% commitment to our zero harm behaviors in support of our drive towards developing a world class safety culture• Plan, estimate, assign work orders, evaluate effectiveness of repairs• Supervise maintenance technicians and provide guidance and training as needed• Weekly and monthly KPI reporting to senior management• Develop and adhere to the current maintenance schedules to ensure equipment is properly maintained and repaired on a regular basis• Inspect equipment and facilities to identify maintenance needs and ensure compliance with safety regulations• Manage, maintain, and order an inventory of spare parts and supplies necessary for maintenance and repair work• Coordinate with the planning, production managers and supervisors to schedule maintenance and repair work during downtime to minimize productions disruptions• Measure efficiency of work orders by estimated hours vs actual hours• Improve CMMS capability through accurate data collection, reporting, analysis tools, preventative maintenance adherence• Monitor equipment performance and identify opportunities for improvement in maintenance processes and procedures• Analyze and determine equipment failures for root cause and recommend solutions. Use CMMS as a tool to improve equipment reliability and identify previous equipment failures and repairs.• Collaborate with other departments to ensure that maintenance activities are aligned with organizational goals and objectives• Must have complete understanding of PLC and Logic controls for high-speed automated equipment• Create and execute an annual strategic plan for maintenance department• Work effectively with outside contractors as necessary• Work on off shift hours to complete urgent repairs• May perform other tasks as deemed appropriateSafety Equipment RequirementThe wearing of appropriate safety equipment as described below is a condition of employment and not one of choice. Safety equipment that must be worn while performing job responsibilities are as follows:HelmetSafety glassesSafety bootsEar plugsRespirator/maskFlame retardant clothingGlovesEducation and Skill Requirement• 15 years of supervisory experience in facility operations or maintenance are usually required• Very strong people leadership and senior maintenance knowledge• Knowledge of Health & Safety Legislation (OHSA), guidelines & standards pertaining to the Foundry Industry• Using communication skills to share information, advise and influence• Forklift licensed, or willing to be trained• Overhead Crane Operator licensed, or willing to be trained• Work independently with minimal direction using good judgment and initiative• Understand English - oral, written and reading, and ability to communicate clearly and concisely• Knowledge in AutoCAD preferred• Capable to use Office applications Word, Excel, power point• Ability to read blueprints an asset• Capable of working in heights, and confined spaces• Industrial millwright or Industrial electrician ticket preferred

REPORTING The Production Manager reports to the Plant Manager. RESPONSIBILITIES & ACCOUNTABILITIES Leadership Provide leadership and support to production personnel and supervisors. Focus on development of supervisors. Leads by example and achieves results by communicating job performance expectations. Makes business, employee and financial decisions that will set us up for long-term success. Maintain constant communication with all internal and external stakeholder, including the support departments. Create leader standard work for themselves and provide support to the supervisors in creating theirs. Enhance and develop policies, procedures and service systems to meet the goals of the facility. Improve overall value stream and become a coach to teach value stream mapping to all the leaders. Safety Ensures a "safety first" culture in the plant and ensures all manufacturing operations are conducted in compliance with Health & Safety regulations. Ensures that supervisors hold employees accountable in the event of contraventions to our safety practices. Production The Production Manager is responsible for all manufacturing activities among all shifts at Toro Aluminum. Find ways to eliminate barriers and provide solutions to execute manufacturing processes while maintaining a safe work environment for all employees. Utilizes best practice knowledge to adapt and implement new methods, lean and continuous improvement practices for manufacturing operations. Makes data-base decisions, maintains and publishes KPI's that measure success of objectives and drives continuous improvement. Establish processes and expectations in meeting the KPI's set out by the Plant Manager. Address high-level production issues and ensure they are resolved and communicated to all shifts. In partnership with the Quality team, establish and maintain a level of quality consistent with customer expectations. Act as a liaison for Lean methodology and implementation in the plant. Ensures the creation and maintenance of a visual management system in the plant using huddle boards, kanban boards, etc. On a daily basis, report plant performance to management.Conducts regular plant audits and reviews and ensures action items are completed. Monitor departmental performance against goals to ensure that progress is being made, and that corrective action is taken if necessary. Improve production standards through time studies and other standard data development methods. Identify areas for waste reduction. In consultation with the Plant Manager, develop plant or process flow layouts to improve productivity. Create and maintain production and manufacturing documentation such as SOP;s Persuade staff to adopt and incorporate quality and CI methods into their work. Prepare operational schedules and coordinate manufacturing activities to ensure production and quality of products meets specifications. Engagement Drives a culture of high performance where everyone is committed to and accountable for delivery of performance goals.Engages the department stakeholders to ensure the success of the team.Formalize the job requirements, job descriptions and procedures for the supervisors and functions within the shop. Responsible for recruitment, hiring, terminations and performance management. Develop objectives/targets for the teams and hold them accountable. Manage manufacturing employees, line workers, and other staff; recommend optimal staffing levels and schedules. Identify relevant training needs and opportunities. Conduct a skills gap analysis and skills development plan. Implement and ensure the maintenance of the employee skills matrix. Manage the morale in the facility by setting and demonstrating a strong business ethic for dealing with employees. Adhere to and provide leadership in matters concerning the Bargaining Unit and the Collective Agreement. Plan for future production and staffing requirements. Ensure that company policies are being adhered to. Other Although this is a day shift role, the incumbent is expected to occasionally overlap with night and weekend shifts in order to properly support manufacturing efforts. The incumbent must be willing to spend one week on nights or weekends per month. Ensure ongoing compliance with local, national, and international standards and legislation. Other duties as assigned. REQUIREMENTS We are looking for employees who share in our core values. Do you emulate the following? Do what you say - We act with integrity so our customers trust us to deliver results Get it done - We find solutions to ensure we get the job done right Be better every day - We are passionate about improving our business, safety, and quality and we strive to be the best Think big picture - We think long-term, and investment in our business is critical to our success Build strong relationships - We value our employees, customers, suppliers, and advisors as an essential part of our business QUALIFICATIONS 5+ years of relevant experience as a Production Manager. Completion of University degree or College diploma. Demonstrate exceptional leadership, problem solving, coaching, technical skills and interpersonal skills. Must possess good verbal and written communication skills. Experience in lean methodology, quality and process improvements in a manufacturing environment. Strong analytical ability and detail orientation. Ability to influence others and effectively work in a team. Strong computer skills including Microsoft Office, Word, and Excel.

Job Summary: Reporting to the Large Format and Garment Supervisor, the Large Format Operator is responsible for producing complete specialized of large format print projects in compliance with job specifications and in accordance with company quality standards and procedures. Coordinates workload schedule to meet customer time frame requirements while achieving optimum productivity. Performs daily/weekly/monthly maintenance on equipment to ensure optimum output. Works closely with other team members to exceed customer expectations. Salary Range : $20.00 - $24.00 per hour Key Responsibilities: Set-up, maintain and operate large/wide format presses for the production of all types of commercial printing. Responsible for timely and quality output of all assigned jobs from docket review to inventory. Inspect all printed and cut products, ensuring quality standards are maintained and comply with clients' and company's specifications as noted on the work order. Staging of job orders for processing to install additional accessories (hemming, grommets, display stands, packing and etc). Minimize and highly conscious of material waste and usage. Ability to readily determine the correct stock type/size needed to do a job and maintain the inventory. Ensure high standards of print/cut quality and efficiency within the department. Package jobs, complete work orders, tickets, and delivery receipts as necessary and placed in their assigned areas. Troubleshoot breakdowns, conduct minor repairs, and perform routine maintenance. Troubleshoot any issues that may arise and/or report to the Large Format Supervisor/Team Lead. Ensure that the area and the machine is kept in a clean, safe and orderly manner. Other duties as assigned. Key Experience & Qualifications: High school diploma/GED with experience or vocational/technical certification. Previous print and/or Large/Wide format presses knowledge/experience is an asset. Demonstrated knowledge of digital cutting machines (Zund and Esko) and/or printing (Tauros and Ceres) Previous experience in operating machinery is an asset. Strong interpersonal skills e.g. working well with others, communication, positive attitude. Strong computer skills. Able to apply written instructions to machine set-up and maintenance. Reliable attendance, punctuality and attention to workstation. Working Conditions: Standing for prolonged periods of time - up to 8 hours or more per day. Frequent lifting of objects up to 50 lbs. Frequent pushing, pulling, lifting, bending, and twisting is required. Work area may have fluorescent lighting and air conditioning. Noise level is usually moderate to loud. Exposure to ink and chemical fumes, and airborne particles such as paper dust and drying powder.